Question about 2006 GMC Envoy

1 Answer

Window washing System

Our 2008 GMC Envoys front window washing system .The drivers side does not spray very much compaired to the passanger side which works fine. I tried poking the spray holes with a Hat Pin ,but it made no difference.any suggestions? Elliot. The driver's side washer fluid doesn't squirt out much at all - just oozes but the passenger side squirts out just fine. I tried running a pipe cleaner, then a needle, then a rigid wire to unclog it but they wouldn't go in very far. It hit something hard and wouldn't go any farther. The same thing happened on the passenger side - they both "felt" the same when I probed it with the wire. My Envoy is a 2006

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GMC Master
  • 75,822 Answers

Remove the hose from the washer nozzle and see if a good stream of liquid comes out, if it does the nozzle is plugged, if it doesn't then the hose is kinked somewhere, look for where it goes to nozzle.

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 Gmc Sierra 5.3 litter SLT. Wire diagram for passanger side power window. No power to door.


Do the power door locks work for that door ? Does you vehicle have door courtesy lights , turn signals on the mirror ? If your vehicle has these other options an they work , you have power to the door . There is an electronic module inside the door ,called passenger door module ! where did you check for power at , the window switch ! These are computer controlled an you would only see a few volts when pushing the switch !

7

  1. Monitor the passenger front window status in the passenger door module inputs list.
  2. Activate the passenger power switch on the passenger door module in the up and down positions.
Does the window status data parameter change accordingly?
Go to Step 8
Go to Step 15

8

  1. Monitor the passenger front window status in the driver door module inputs list.
  2. Activate the passenger front power window switch on the driver door module in the up and down positions.
Does the window status data parameter change accordingly?
Go to Step 9
Go to Step 16
Operate the passenger front power window in the UP and DOWN directions from the master switch.
Does the passenger front power window operate properly from the master switch?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 5

4

  1. Install a scan tool.
  2. Monitor the window lockout data parameter in the driver door module inputs list.
  3. Activate the window lockout switch to both the On and OFF positions.
Does the window lockout data parameter change state appropriately?
Go to Step 5
Go to Step 16
Your best bet is to take this to dealer or a ASE certified repair shop.

Jun 14, 2015 | GMC Cars & Trucks

2 Answers

Passanger window wont roll up from driver side or passanger side


Replace the regulator. It comes with the motor. You have to remove the door panel to access it.

May 26, 2015 | 2006 Kia Sorento

1 Answer

Popping noise when raising window drivers side front window


try spraying wd 40 down each side of window/door grooves could just be very dry and causing a bit of friction

Apr 09, 2014 | 2008 Dodge Avenger

1 Answer

My passanger front window is stuck in the down position. Could this be the window switch?


The same thing happend with my 94 lesabre. I thought it was the switch but i realized that the switch was fine. I went at the junk yard and got my self a power window motor. That is proboably what is wrong with your windows. I recommend that you get yourself new or used window motors and that sould do it!

Best of luck

Oct 10, 2012 | 1994 Buick LeSabre

2 Answers

Window washing System


Unhook the line and blow out with air compressor.
The fluid corrodes and will clog them!

Apr 18, 2009 | GMC Envoy Cars & Trucks

1 Answer

Passanger window problem


this is a new vehicle there is a lock button thats below the controls or above the control make sure its off and not on that can cause this to happen if it is not that then the push button for that window is bad you should be still under warranty take it to dealer if it is that/ Please rate my response thank you very much

Jan 30, 2009 | 2007 Mazda CX-7 Grand Touring

1 Answer

Front passanger window not working


could either be switch contacts are dirty from coke spill or something, or the switch plastic is broken. ( get known good switch pack from another car off junkyard or from a saab dealer's other car. if that won't work, then try the window regulator motor in the door.

Jan 20, 2009 | 1997 Saab 900

Not finding what you are looking for?
2006 GMC Envoy Logo

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...