Question about 1999 Dodge Intrepid

1 Answer

# 1 injector not firing

1997 dodge intrepid 3.3 L motor. I had some damage from a mouse chewing on wires but have repaird those but injector is not firing . I have replace the injector but it still doesnt fire

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

Well you need to check the harness to see if it is getting power. You may need to take the plentum off and then unplug the harness and then reinstall the plentum but make sure that you leave the harness out so you have access to it.

Then you can make a test light or purchase one. Plug the test light into the harness and start the car. This light should flicker, if not you didn't repair the wire properly. Doesn't sound like a fuse being that none of the injectors would work if a fuse blew.

It could also be that the PCM grounded out when the mouse chewed the wire and needs to be replaced.

Don't worry about checking the ASD Relay because that would cut off all power to the injectors and coils.

Posted on Apr 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a fuse terminal and where can I find on 1997 dodge intrepid


Junkyard....terminal may just have a flaw that can b repaird. Find a country or olschul mechanic

Jul 14, 2015 | Dodge Cars & Trucks

1 Answer

I changed the belts on my 97 intrepid 3/3 ltr a couple weeks ago and it stated running rough and misfiring. Changed the plugs, wires and coil pack and it is now misfiring and stalling?


changing belts will not cause this problem.when changing the plugs did you check the plug gap or just assume the plugs were gapped properly.this could be one problem.did you change the wires one at a time or did you pull off multiple wires and change them,this could be another problem(wires not in proper location).you could have an intake gasket that is bad causing a vacume leak,which can cause miss fire.it could be a fuel injector problem(either electrical or fuel).is the check engine light on,this is a starting place have the code pulled.these i would check out.

Apr 19, 2011 | 1997 Dodge Intrepid

2 Answers

I have 96 dodge intrepid, the motor will turn over but won't start. I checked the sparkplug wires and tested for fire. It gets fire


depending on which engine, could be CKP sensor or Cam sensor, does it have injector pulse?? does it have Fuel pressure and good volume??

Feb 28, 2011 | 1996 Dodge Intrepid

1 Answer

Car want start


replace the ECM.

Apr 28, 2010 | 1997 Dodge Intrepid

1 Answer

The wiring for the injectors was mouse chewed. We


The end pieces are commonly refered too as pig tails.

Mar 29, 2010 | 1993 Dodge Spirit

1 Answer

Firing order for 1997 Dodge Intrepid 3.5l


For the 3.5L SOHC V6
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back)
1........3........5
2........4........6
.....(front)
Ignition Coil Connections:
(back)
6....3
4....1
2....5
(front)

Let me know if this helped, or if you have additional informtion or questions. Feel Free to contact me at FixYa.com!

Nov 04, 2009 | 1997 Dodge Intrepid

3 Answers

1997 dodge dakota 3.9l,change plugs wires dis cap rotar/still misfire cyl 5&6/check for water in gas/engine light still comes on


MAKE SURE YOU HAVE THE WIRES ON THE RIGHT PLUGS.YOU MAY NEED TO GET THE CODES SCANNED TO NARROW DOWN YOUR PROBLEM BUT I THINK IT'S A FIREING ORDER PROBLEM.IF THIS IS NOT THE CASE THEN DO A COMPRESSION TEST ON THE MOTOR TO SEE IF YOU NEED TO GO DEAPER.

Oct 17, 2009 | 1997 Dodge Dakota

1 Answer

CODES NUMBER 1 INJECTOR CIRCUIT OPEN.1998 DODGE INTREPID 2.7


The ground wire from the injector to the pcm is open. The injectors share the same power wire but the pcm grounds each one individually to fire.

Apr 17, 2009 | 1998 Dodge Intrepid

2 Answers

Cylinder 8 missfire


If the plug and coil are good and you have good compression you should probably replace the cylinder 8 fuel injector.

Mar 12, 2009 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
1999 Dodge Intrepid Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...