Question about 2001 BMW 5 Series

1 Answer

The turn signals , displays on radio unit will not work completly

Interior lights on dash , turn signals not funtioning and display for open door an the radio Cd the radio plays but you canot change anything and there are no display lights someone said a relay?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

This is a short circuit on the bus network.
1- i would examine the exterior temperature sensor and that the two wires are not in contact.
2- on the rear right side of the trunk there is a white socket, make sure it has no water ingression in it.
3- take out the A/C head unit and try if things works.
4- Remove the instrument cluster and unplug its sockets and all should be working.

from the above we can detect what is causing this

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior light delay


Same for both doors? If not, I'd check the switch(s) on the drivers door (may be more than one), or may be just one that has multiple contacts and the ones for the lights may be faulty.

Jul 01, 2017 | 2008 GMC Sierra 2500HD 2WD

1 Answer

1998 chevy s10 Head unit and dash display not working


You may have damaged the instrument cluster. The PCM has to receive a code from the instrument panel to start. Its part of the security system. Beyond checking fuses you are going to have to take it to a qualified mechanic with the proper diagnostic equipment. It sounds like you wired something incorrectly

Jan 18, 2014 | Cars & Trucks

1 Answer

Electrical problem (weird)


I thinkit is the door switch, you can check by pushing it while the doors is open.
Very easy and cheap to replace it.Good luck.

Jan 10, 2014 | 2005 Honda Accord

1 Answer

No indicators working found fuse box which fuse?


When you are talking about "indicators" we could assuming that your are refer about signal lights. This work with "flashers" devices.

For 1996 Audi A4 2.8L SFI 6cyl the Flasher is located in front seating area, driver side, under dash, behind dash lower panel, mounted above driver side of steering column.

About generic fuses, open the driver side door. Remove panel on left side of dash. Fuse box is behind panel:

Fuse # / Description / Amps
1 / Heated washer jets / 5
2 / Turn signals flasher unit / 10
3 / Headlight washer, illumination of glove compartment, engine compartment, climate control, automatic transmission, instrument cluster / 5
4 / License plate light / 5
5 / Instrument cluster, seat heating, test connection for cruise control, bulb monitor for auto-check control, Automatic transmission display, switch lighting, mirror switches and actuators, airbag warning light, outside temperature indicator, Climate control / 10
6 / Central locking system / 5
7 / Anti-lock brake system / 10
8 / Vacant
9 / Mirror heating / 10
10 / Vacant
11 / Cruise control (automatic transmission) / 5
12 / On board diagnostic system / 10
13 / Brake lights / 10
14 / Interior lights, reading lights, anti-theft alarm system, vanity mirror / 10
15 / Instrument cluster, power windows, climate control, automatic transmission / 10
16 / Anti-lock brake system, Anti-Slip-Regulation / 5
17 / Heated door locks / 10
18 / High beam right / 10
19 / High beam left / 10
20 / Low beam right / 15
21 / Low beam left / 15
22 / Tail and side marker right / 5
23 / Tail and side marker left / 5
24 / Wiper and washer system / 25
25 / Blower for heating, climate control / 30
26 / Rear window defogger, mirror heating / 30
27 / Rear window wiper / 15
28 / Fuel pump / 15
29 / Engine timing / 20
30 / Sun roof / 20
31 / Tail lights, cruise control, automatic transmission / 15
32 / Engine timing / 20
33 / Cigarette lighter / 15
34 / Engine timing / 15
35 / Trailer receptacle / 30
36 / Fog lights / 15
37 / Radio / 20
38 / Luggage compartment light, central locking system / 15
39 / Emergency flasher / 15
40 / Horn / 25
41 / Anti-lock brake system / 25
42 / Vacant
43 / Vacant
44 / Seat heating / 30

Hope this helps (remember to rate and comme this free answeer).



Jun 16, 2011 | 1996 Audi A4

2 Answers

Dashboard completely stopped working. help! cd player does not work


you vehichle has 2 fuses that control the funtions in your dash. and a third that will be in the cigarrette lighter radio circuit. you interior fuse box is located on the far left sid eof the dash. open the drivers door and on the very end of the dash there is a door in the end cap this is the cover to your fuse box.
at any auto parts store you can purchase a cheap circuit light tester for 3 or 4 bucks a real handy and valuable tool to have in you car. one end of the tester has a alligator clip hook this to any bolt head or piece of metal and the pointed end you can test the fuses without having to pull each one out to inspect it for being blown. in the back side of the spade fuses in your fuse box there is a small hole where you can make contact with the fuse itself. one on each side of the fuse. if the tester only lights up on one of these pins the fuse is blown. if it lights up from both sides the fuse is good.

Nov 06, 2010 | 2004 Chevrolet Suburban

1 Answer

Electrical Problem in 1995 Jeep Grand Cherokee Limited


You co0uld change the module but I don't know the exact location of yours (under the dash) If I was working on it and couldn't get a location, Id take a look at one from a parts house so I had an idea what I was looking for, then start looking. They aren't cheap though so sometimes it's best to have a good shop look it over just to make sure it will fix the problem.
When working, I test everything either with meters, scanners etc or use known good units to check problems. Here, I can only make educated guesses. Electrical parts are generally non-returnable so mistakes can be costly.
Good luck though.

Apr 27, 2010 | 1995 Jeep Grand Cherokee

1 Answer

2000 jeep grand cherokee interior lights won't turn on...


Check your owners manual for your fuse panel, it will show you the location of the fuse panel, as well as the fuse location for the interior lamps. If the fuses seem ok, check your door switches, located near your door hinges on each door, they should be spring loaded, and mov in and out freely. It is very likely some dirt,or rust has locked one of the in the closed position, however if all the switches are funtioning properly, Check the interior dimmer switch, this controls your dash light brightness, as well as your interior lights. If you cant control the dash light brightness this is likely the culprit.

Feb 14, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Interior light and diagnostic plug doesn't work


The data link gets it's power from fuse no. 3(20 amp) in the interior fuse panel,which also is the power for cig. lighter. This fuse gets it's power from fuse no. 103 in the battery junction box (50 amp).

For the interior lights the door adjar switches in the door send a signal to the GEM module.It then grounds the coil side of the interior lamp relay. The switch on the dash that you turn on manually also grounds the coil side of the interior lamp relay so that would mean that everyrhing after the GEM is ok.Are the lights not turning on from any door including the deck lid? If not then problem would have to be in the GEM module.

Feb 26, 2009 | 2000 Ford Expedition

1 Answer

2005 Ford Expedition XLT, major electrical problems


You have a wiring harness problem
Take it to the dealer directly.......

Nov 18, 2008 | 2005 Ford Expedition

Not finding what you are looking for?
2001 BMW 5 Series Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...