Question about 1990 Dodge Dynasty

1 Answer

Cant get old one off to replace it with the new one

How do i get the tensioner pulley out of a 1992 dodge dynasty and replace it it has another pulley blocking it trying to find an easy way to get it off and replace it

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Had the same problem, but it was the power steering pully, you have to get it from up under the car, it will be pretty hard to get the belt tensioner tool through there, but can't get it from up top.

Posted on Jul 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant find belt tensioner on 92 dodge dynasty 3.3l with a/c


http://autorepair.about.com/library/faqs/bl820g.htm

Dec 17, 2011 | 1992 Dodge Dynasty

1 Answer

1992 dynasty,serp.belt keeps falling off


Either your "belt tensioner" is bad (meaning, not applying the right amount of tension to the belt) or your serpentine belt could be worn or stretched.

images?q=tbn:and9gcqsjm-ullaqy5h_fnhme4uduut4qejvtavr3gjsbcyy3kwqtup0bknhirtr

Feb 20, 2011 | 1992 Dodge Dynasty

1 Answer

What is involved in replacing an idler pulley located just below the alternator on a '93 Dodge Dynasty? The welded bolt on the pulley broke for some reason.


Just gotta get yourself a new pulley. Not very hard to replace- you may have to remove alternator and belt first

Feb 19, 2011 | 1993 Dodge Dynasty

1 Answer

How do I get the tension off the belt to finish installing on a 1991 dodge dynasty?


Try a 1 1/2 to 2 ft.metal bar to pry tension pulley back--get helper to remove. Wear heavy gloves. Do same to install new belt.

Feb 04, 2011 | 1991 Dodge Dynasty

1 Answer

Replace serpentine belt on 1992 dodge grand


Click on the following free direct Link.
It has the correct Belt Diagrams for your 1992 Dodge Grand Caravan wirh either the 3.0L SOHC V6 or the 3.3L V6.

http://www.2carpros.com/car_repair_information/year/1992/make/dodge/model/grand_caravan/1992_dodge_grand_caravan_drive_belt_routing_diagram.htm


Included on the Diagrams are the Instructions on "Rotating" the Automatic Tensioner. See Below for additional Instructions to make your job easier.

"HOW TO": I professionally prefer the Serpentine Tensioner Tool.
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s).
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (located on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening located on the Tensioner Arm) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Before You GO:
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 11, 2010 | 1992 Dodge Grand Caravan

3 Answers

Serpentine belt diagram for a 3,3l dodge dynasty with ac


For the 1991 DODGE DYNASTY - V6 3.3L 201ci GAS FI N R , review this informacion:

Belt Routing Diagram
- Multiple Accessory, w/o A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/o A.C. (Mfg. Before 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. Before 2/27/91)
684ce70.jpg


Remove the serpentine belt by using a breakover bar, rachet or serpentine belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the belt.

Hope helped with this (remember rated this help) Good luck.

Nov 12, 2009 | 1991 Dodge Dynasty

2 Answers

Dodge Dynasty 1990, 3.33 liter eng. The belt


Check to see if all your pulley's are aligned properly. It sounds like they may not be. Put the belt back on and look straight down it. If it appears to have a bend, that needs to be fixed. If you have a carpenter's square you can use it to double check you eye. You can use washers as shims on the bolts that hold whatever is out of line. If it sticks out too far you'll have to grind or file it to bring it back in line or remove washers or spacers if there are any. Hope this helps.

Oct 04, 2009 | 1990 Dodge Dynasty

2 Answers

1992 Dodge Dynasty 3.3l installing serpentine belt


They do make a belt tensioner tool that is flat....stays out of the way better than a wrench or socket..
Was this the belt that came off this engine?
Is the belt the correct length?
It should just fit on easily.
Is the rest of the belt fully seated in the other pulleys?
Sometimes you put the belt on the tensioner pulley before finishing by installing the belt onto a/the flat idler stationary pulley last....then release the tensioner.

Sep 06, 2009 | Dodge Dynasty Cars & Trucks

2 Answers

Odometer and belt tensioner


if your still having belt problem the harmonic balancer may be bad and sooner or later will fall apart. as for the odometer the cluster may be bad, as mine is or the sensor at the trans may be bad

Jun 14, 2008 | 1992 Dodge Dynasty

Not finding what you are looking for?
1990 Dodge Dynasty Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...