Question about 2004 Mitsubishi Endeavor

2 Answers

Can't get rear rotors off...

I can't get the rear rotors off my 2004 Mitsubishi Endeavor.

Posted by on

  • 1 more comment 
  • shonta_powel Apr 22, 2009

    Ok, let me try that now...

  • shonta_powel Apr 22, 2009

    Thanks so much!! The bolt thing worked perfectly!!

    Thanks again soooooo much ;)

  • yadayada
    yadayada May 11, 2010

    keep at it they are rusted to hub.



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 710 Answers

There should be two holes in the rotors that will be threaded. send two bolts in them a little at a time to push the rotor away from the backing plate.

Posted on Apr 22, 2009

  • Mark L. Roberts Jr.
    Mark L. Roberts Jr. Apr 24, 2009

    You are very welcome. Glad i could help


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The holes should take 8mm bolts. If the rotors are really rusted on you should hear a pop as you tighen the bolts and the rotor breaks loose.

Posted on Jul 30, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is there a way to reset keyless entry for 04 endeavor?

Search Results

    2004 Mitsubishi Endeavor Key Fob Remote Programming ...
    Apr 25, 2013 - 2004 Mitsubishi Endeavor Key Fob Remote Programming Instructions ... you might have visit us at You can also ...

    Mitsubishi - Free Keyless Remote Fob Entry programming .

    How To Replace Mitsubishi Endeavor Key Fob Battery 2004 ...

    ? 2:04
    Oct 31, 2014 - Uploaded by Keyless Entry Remote Inc
    ... will show you How To Replace Mitsubishi Endeavor Key Fob Battery 2004 2005 To Order This Remote ...

Nov 01, 2015 | Cars & Trucks

1 Answer

Are the bolts to remove the front rotors on a 2004 mitsubishi endeavor reverse threaded

never seen left handed threads on a brake disk ,use a impact driver as they are tight to remove and if that doesnt move them drill the head off ,the wheel nuts will hold it all in place ,some cars like fiats do not even have a retaing screw

Mar 23, 2011 | 2004 Mitsubishi Endeavor

2 Answers


Take the wheel off.

Remove the two 14mm bolts holding the caliper bracket on.
They are the two farther inboard, behind the hub.

Slide the caliper and its bracket off the rotor and support it so you do not strain the brake hose.

Slide the rotor off.

If the rotor is stuck/rusty, you take take a hammer and tap on the hub section of the rotor to loosen it.

Sep 12, 2009 | 2004 Mitsubishi Endeavor

1 Answer

I can´t find the drain tube in my 2004 endeavor

sounds like a rear main seal ore oil pan gasket.
I worked for Mitsubishi i hated there junk

Jul 26, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Trying to remove the front rotors that is securing the rotor to the wheel assembly. Need to know the name of he tool that release the philip head screw. Mitsubishi Endeavor 2004

If you can see the head of this screw, drill it out and retap the threads with M8 x 1.25tpmm. Due to the heat these seize often.
It best to use a depth stop set at 12mm below surface to prevent possible damage to the hub or bearings. Manual Hammer driven impact drivers are often effective and sold by harbor freight cheap.

Jun 27, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Front rotors on 2004 mits endeavor

you turn them left to loosen and a little bit of heat is the best way to get them loose and when you put it back together make sure to put anti seize on them

May 05, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Changing front brakes on 2004 mitsubishi endeavor

if you have floating rotors in the front then no.

But if you have locking hub units in the front then yes the bearing will have to come apart.

But if there is only one nut and you can see the threads through the wheel then no you have floating rotors, and sometimes are rusted to wheel bearing and are a pain to get off. Call the parts department and ask whether these are floating rotors or not. This will clarify everything

Mar 03, 2009 | 2004 Mitsubishi Endeavor

1 Answer

2004 mitsubishi endeavor passenger rear window off track

Yea its actully quite simple, but expensive. The regulator needs to be replaced. I have already replaced my right rear, but I think my driver side is going out also, sounds like it anyway.
Thank God I bought a third party warrnty and they took care of everything. Zurich is the name of the company. I purchased the one with no deductible. Anyway I wish I had a better solution-but its awful hard to do your self.

Sep 29, 2008 | 2004 Mitsubishi Endeavor

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

Related Topics:

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides