Question about 1998 Dodge Ram 1500 4WD

Open Question



Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 51 Answers

SOURCE: oil pan removal on 2002 gmc sierra

did you pull the rubber plugs between the motor and trans out? there are either nuts or bolts up there

Posted on Mar 15, 2009

  • 82 Answers

SOURCE: removal of oil pan on 1989 S10 Blazer 4.3L 4wd.

as far as I know it can't be done without removing the engine, I never could do it with the motor in the truck

Posted on May 05, 2009

  • 4 Answers

SOURCE: how to remove the oil pan on a 2004 dodge ram 2500 diesel

I'd recommend getting a service manual first. I got one for my 2005 2500 cummins from I also had to to remove the oil pan and replace it with another one.

Posted on Jun 20, 2009

  • 1 Answer

SOURCE: where is the oil pan on a hyundai elantra 2002 GT?

Rule of thumb; if you can't find the oil pan then you do NOT have the skill it takes to change the oil!

Posted on Oct 29, 2009

  • 310 Answers

SOURCE: How to remove the oil pan on a 2004 dodge ram hemi

take motor mounts lose pull or jack up on motor block up and pull oil pan just a enough to get oil panl off

Posted on Jan 26, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I remove oil pan from a Dodge ram 2010

How to change oil pan on dodge ram 2000 - YouTube

? 2:42
Apr 9, 2015 - Uploaded by Carlos Juarez
How to change oil pan on dodge ram 2000 ... How to Replace Remove Headlights on Dodge Ram 2009 2010 2011 2012 hid - Duration: 3:40.

Oct 07, 2015 | Dodge Cars & Trucks

1 Answer

How do you replace a oil pan on a 02 kia sportage?

Jack up car put on stands remove exhaust if it crosses under sump remove all the screws or nut bang side of sump with a rubber hammer to break seal,clean off old sealer.

Aug 15, 2014 | 2002 Kia Sportage

2 Answers


depends on whether you have 2WD or 4WD. The manual says if you have 2WD you have to remove the tranny,but not if you have 4WD. See procedures below.

5.9L & 6.7L Diesel Engines
2WD Models

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Open the hood.
  3. Remove the negative battery cables.
  4. Raise and support the vehicle.
  5. Remove the transmission oil cooler lines.
  6. Remove the propeller shaft.
  7. Remove the starter bolts.
  8. Support the starter.
  9. Remove the torque converter bolts.
  10. Remove the exhaust hanger bolts.
  11. Remove the gear shift cable.
  12. Remove the wiring harness.
  13. Remove the transmission mount.
  14. Remove the crossover bolts.
  15. Position the transmission jack.
  16. Remove the bell housing bolts.
  17. Remove the transmission.
  18. Remove the flywheel housing bolts (8).
  19. Remove the flex plate bolts (8).
  20. Remove the engine oil dip stick.
  21. Drain the oil.
  22. Remove the steering rack bolts.
  23. Remove the oil pan bolts.
  24. Remove the oil pickup bolts.
  25. Remove the oil pan.

4WD Models
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Open the hood.
  3. Disconnect the battery negative cables.
  4. Remove the intake air assembly.
  5. Remove the radiator shroud retaining bolts.
  6. Install engine support fixture No. 8534B.
  7. Raise and support the vehicle.
  8. Drain the engine oil.
  9. Loosen the front engine mount bolts.
  10. Lower the vehicle.
  11. Use the engine support fixture No. 8534B to raise engine out of the front mounts.
  12. Remove the engine oil dipstick.
  13. Raise and support the vehicle.
  14. Remove oil pan bolts, break the pan to block seal, and lower pan slightly and remove oil suction tube fasteners.
  15. Remove oil pan and suction tube.
  16. Remove the 2 bolts from the front of the engine block stiffener.
  17. Remove the oil pan.

Oct 30, 2010 | 2007 Dodge Ram 3500 Quad Cab Laramie

1 Answer

On 1994 dodge 1500 4x4 to change oil pan do i have to raise the engine

  1. Disconnect the negative cable from the battery.
  2. Remove engine oil dipstick.
  3. Raise vehicle.
  4. Drain engine oil.
  5. Remove exhaust
  6. Remove left engine to transmission strut.
  7. Loosen the right side engine support bracket cushion thru-bolt nut and raise the engine slightly. Remove oil pan by sliding backward and out.
  8. Remove the one-piece gasket.

Oct 15, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Whats the best way to get to the oil pressure sending unit on a 5.9 litre dodge ram

The oil pressure "sending unit" pump is located in the oil pan, in/at the bottom of the engine. It's not something I'd recommend trying if you've never attempted a lengthy or relatively difficult repair, without guidance. You don't indicate if you have 2wd of 4wd. However, in any event, you're going to have to remove the oil pan. It will most likely require you to loosen the motor mount(s) and jack/lift up the engine. Not necessarily the best way, but the easiest. I'd be concerned with engine wear also if the oil pump is bad. Which would require you to at least change the connecting rod and main bearings.

Mar 05, 2010 | 1999 Dodge Ram

3 Answers

How to remove the oil pan on a 2004 dodge ram 2500 diesel

What motor is in it? Mostly have to take all the oil pan bolts out, undo the motor mounts and raise the motor up enough for the oil pan to clear the cross member. make sure you don't have too much in the way when you raise the motor, as you may break something.

Jun 04, 2009 | 2004 Dodge Ram 2500

1 Answer

I need the location of the oil pump on a 1998 dodge ram

Remove the oil pan, it is mounted at the rear of the engine with a tube and screen attached. Be sure to prime the new pump before installing it.

May 12, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Oil pump

remove oil pan from engine..oil pump is bolted to rear main bearing cap of engine..pickup tube may be plugged if you're having an oil pressure issue

Mar 24, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Removeing the oil pan

first of all drain the oil and then remove all bolts from the pan.

Feb 16, 2009 | 2002 Dodge Ram 3500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides