Question about 2004 Ford Explorer
I recently purchased a pre-owned 2004 Ford Explorer XLT. I had a lcoal Ford dealer do an ABS diagnostic to see why the light won't turn off once it is activated, make a FOB and retrieve the code for the door's external numeric lock. I am not sure when the problem started, but immediately after the service visit the radio doesn't shut off at all. I spoke with the dealer and all the service manager said was that I need a new radio. I need to know is there a simple solution to this besides getting a new radio? Is the dealer responsible? What should be my next step to have silence in my car besides just turning the volume completely down?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
With 20 years audio experience under my belt, no you don't. Premium chat me and I can tell you how to find every wire
Posted on Jan 17, 2009
yes there is a know problem with the fuel system. fuel pump breaks down, empty your fuel filter into a bowl and check for metalic, if you have this in the filter your pump is F..... along with all the other common rail stuff. expensive job... error codes though, i find that hard to believe, fuel pressure faults will occur, i think you garage does not know what to do. or does not want to tell you the cost of the job and he will be in doubt himself of wether he is right..... was you engine coil light flashing at any point.!!!
Posted on Mar 30, 2009
SOURCE: Auto Lock Activation
There are 3 methods to enable/disable this feature. One through your
dealer, the second with a power door unlock/lock sequence and the third
with the keypad.
Before following the activation or deactivation procedures, make sure
that the anti-theft system is not armed, ignition is off, and all vehicle
doors, liftgate and liftgate window are closed.
Controls and features
Power door unlock/lock
You must complete steps 1-5 within
30 seconds or the procedure will
have to be repeated. If the
procedure needs to be repeated,
you must wait 30 seconds.
1. Turn the ignition key to ON.
2. Press the power door unlock control three times.
3. Turn the ignition key from ON to OFF.
4. Press the power door unlock control three times.
5. Turn the ignition back to ON. The horn will chirp.
6. Press the unlock control, then press the lock control. The horn will
chirp once if autolock was deactivated or twice (one short and one long
chirp) if autolock was activated.
7. Turn the ignition to OFF. The horn will chirp once to confirm the
procedure is complete.
Keyless entry key pad procedure
1. Enter 5 digit entry code
2. Press and hold 7/8 control
3. Press and release 3/4 control
4. Release 7/8 control.
The user should receive a horn
chirp to indicate the system has
been disabled or a chirp followed by
a honk to indicate the system has
This feature prevents the driver’s door from locking while the key is in
the ignition. This feature will unlock only the driver’s door if the key is in
the ignition cylinder, the driver’s door is ajar and all doors are locked
using the interior trim switch. If these conditions are met, the entire
vehicle will lock and the driver’s door will unlock within 1 second.
Controls and features
Posted on May 15, 2009
Tips for a great answer:
Aug 23, 2014 | 1999 Ford Explorer
Apr 16, 2014 | 2004 Ford Explorer XLT
Mar 10, 2013 | Cars & Trucks
Sep 01, 2011 | 1999 Ford Explorer
Aug 01, 2011 | 2004 Ford Explorer
Oct 07, 2010 | 2002 Ford Explorer
Apr 15, 2010 | 2004 Ford Explorer
Oct 12, 2009 | 1999 Ford Explorer
Apr 05, 2009 | 2002 Ford Explorer
Dec 22, 2008 | 2004 Ford Explorer
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: