Question about 2002 Chevrolet Cavalier Coupe

1 Answer

Need diagram of engine for 2002 cavalier z24

Need to replace hose that goes from radiator to engine. want to make sure I got the right one. I know where it is, just not the specific name.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 129 Answers

Its the upper radiator hose should be located topside beside the engine oil dipstick,any smaller hoses you have running into the radiator are heater hoses, the lower radiator hose is where coolant enters from radiator into engine and is pumped up with water pump thru water jackets in engine and eventually returns thru the upper radiator hose which is most prone to damage due to splitting and cracking, I hope this helped.

Posted on May 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 Cavalier Z24 that leaks oil bad. The oil drips off of the bottom of the engine between the oil pan and transmission. I also noticed some oil at the top where the upper cooling hose is.


With this age of engine, the most likely cause is plugged up drain holes in the head. This allows the oil that goes to the cam and valve mechanism to be retained under the valve cover and present a challenge to the old valve cover gaskets,. Recommend you remove the valve cover, make sure the oil drain holes are clear and replace the valve cover gasket.

Nov 09, 2014 | 2000 Chevrolet Cavalier

1 Answer

Need wiring diagram for 1990 &1993 z24 cavalier dash


I am sorry but Fixya doesn't have any wiring diagrams.

Jun 06, 2012 | Chevrolet Cavalier Cars & Trucks

1 Answer

Where is the thermostat located on a 1998 cavalier z24 2.4L twin cam?


follow the top radiator hose where it goes into the engine there will be a matal housing and where the housing is there will be two bolts take the bolts out and tap the housing it should come off and that is where the thermostat is

Mar 28, 2011 | 1998 Chevrolet Cavalier

2 Answers

Changing the spark plugs on a 2002 Chevy cavalier Z24 2.4L engine. Where are they located? or is there a free wiring diagram that can show me?


just remover your plastic cover on top of the engine and they should be right in your face it will only have four make sure you do one at a time so youe dont mix up where the wires go

Jul 28, 2010 | 2002 Chevrolet Cavalier Coupe

2 Answers

99 cavalier loosing colant


it could also be the water pump that is leaking

Sep 22, 2009 | 1997 Chevrolet Cavalier

1 Answer

2002 Chevy Cavalier how 2 replace radiator hose and a belt


First thing I would do is get your supplies. Antifreeze, lower radiator hose, 2 new hose clamps, serpintine belt, and I would purchase a Chiltons repair manual for your car. It is abour $15 for the manual but it will cover about very repair you will need to make as time goes on.
On newer cars you have to hold the automatic tensioner back with a wrench as you uninstall or reinstall the belt. Make sure you know or remember how the belt runs. You can put the belt most of the way on, then hold back the tensioner for the last step.
For the lower radiator hose, you need to drain the antifreeze from the radiator. The drain plug is usually on the bottom or the on the bottom engine side of the radiator. Make sure you drain it in a pan/ bucket/ pail as I believe it is against the law to drain it out on the ground and watch that pets/humans don't drink it because they will die. After draining it unsrew the clamps holding the hose on and remove the hose. Sometimes the hose will be stuck and twisting it or running a screw driver between the hose and the fitting will loosen the hose. Put the new hose on with the new clamps. I always use new clamp so you don't have to trust the old beat up/ stretched clamps. But don't throw out the old ones, as you may need them for an emergency repair sometime. Either put the old fluid back in(if it is still good) or put in the new stuff. Make sure you get the right mixture. You will need to run it a while and have the mixture checked.
Like I said about the book----it should cover both of these repairs, and tell you when to do routine maintence, the capacities of your fuel tank, radiator, oil, transmission, etc.

I hope this helps

Aug 10, 2009 | 2002 Chevrolet Cavalier Coupe

3 Answers

I can't find to replace the thermostat on a 95 cavalier Z24 it hot out here I need to run my A/C help!


where the upper radiator hose meets the engine is usually were the thermostat is located.

Jun 27, 2009 | 1996 Chevrolet Cavalier

1 Answer

ECM Location


For one i dont need your vin its a z24 which means it has a 2.4l engine it does not have an ECM it has a PCM powertrain control module, which is located for your car in the right rear corner topside of your engine bay, in 1995-2001 it is located inside the right front fender. I hope this info helps...

Apr 07, 2009 | 2002 Chevrolet Cavalier Coupe

2 Answers

99 Chevy malibu 2.4L engine coolant temp sensor


its at the end of upper radiater hose at housing for thermostat.

Mar 31, 2009 | 2003 Chevrolet Malibu

1 Answer

Thermostat location


follow the top radiator hose to th engine and youll find a clamp there . unhool the hose and remove the 2 bolts that hold the housing and pull the old thermostat and put the new one in make sure you get a new gasket with it and that youclean all the old gasket material off the housing so it will seat right and not have any leaks

Jan 24, 2009 | 1991 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

1,490 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...