Question about 1992 Volvo 240

1 Answer

Replacing the fuel filter on my 1992 volvo 240

How can I remove the connections from both ends of the fuel filter? I have tried using two wrenches but to no avail. Do you have any suggestions. Will it help to apply liquid wrench or wd 40 prior to the removal.

Thanks,

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

I had to put mine in a vise to get them off they rust on bad

Posted on Jun 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel filter location 08' volvo v50 1.8 petrol?


Removal & Installation

Print

NOTE The fuel filter is either on the left side of the firewall or next to the fuel pump near the left side of the fuel tank.

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket

To install:
  1. Install or connect the following:

    Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
  2. Start the engine and check for leaks.


  3. 0900c152801c13b0.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models
    Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models



NOTE The fuel filter is either on the left side of the firewall or next to the fuel pump near the left side of the fuel tank.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket

To install:
  1. Install or connect the following:

    Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
  2. Start the engine and check for leaks.

    0900c152801c13b0.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5 cylinder models
    Using an open end wrench to push the quick disconnect coupler sleeves back-5 cylinder models



NOTE The fuel filter is either on the left side of the firewall or next to the fuel pump near the left side of the fuel tank.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket

To install:
  1. Install or connect the following:

    Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
  2. Start the engine and check for leaks.

    0900c152801c13b0.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models
    Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models


On these models, the fuel filter is part of the fuel pump assembly. Refer to Fuel Pump removal and installation.

May 12, 2012 | 2005 Volvo V50

1 Answer

Where is fuel filter located for 1992 volvo 240


Hi, it is located with the fuel pump under the drivers side of the car. It rests on a plate that also has the fuel pump attached to it. Undo the bolts holding the plate to the bottom of the car and you will see that it is very easy to replace.

Nov 08, 2010 | 1992 Volvo 240

1 Answer

Trying to locate engine temperature sensor 1992 volvo 240 wagon. Thanks


the engine temp sensor on a 1992 240 (b230f engine) is located on the passenger side of the engine, right next to the oil filter and right above the alternator. good luck :)

Sep 09, 2010 | 1992 Volvo 240

1 Answer

My 1992 volvo 240 wouldn't start until after several tries, then today it kept stalling at stop lights. Took it to a garage and they said the engine mounts were broken and fan belts needed replacing, but...


These models have a control module on the right front fender which had problems with the connections. Have someone crank the engine while you wiggle the harness. If starting comes and goes, Volvo sells the repair kit for this. Let me know if you need further assistance.

Mar 24, 2010 | 1992 Volvo 240

1 Answer

What is involved with a tune up on a 1992 Volvo 240. Is is it mostly changing the plugs and oil?


Yeah mostly, here is a list of things to replace; plugs, wires, air filter, and fuel filter.

Dec 19, 2009 | 1992 Volvo 240

3 Answers

How do i access the fuel pump in a 1991 volvo 940T where is the tank located. Mike


The fuel pump is located in the fuel tank beneath the back seat which you can reach by removing the back seat.

Cheers.

Sep 06, 2009 | 1991 Volvo 940

2 Answers

Intermittently won't start


Check for clogged fuel filter or clogged fuel lines.

Aug 23, 2009 | Volvo 240 Cars & Trucks

2 Answers

1988 volvo 740 gle non-turbo loud fuel pump


Have you tried replacing the fuel filter? It is located under the cars center on the left side ..

You will find it alongside the main high pressure fuel pump on a metal support plate held up with 3 bolts.
Remove the 3 bolts with a 10mm socket wrench to lower the plate. Place a catch pan below the filter to catch any leaking fuel.
Be careful not to get fuel in you eyes or running down your arms. Remove the 2 bolts holding the banjo fuel pipe connections to the filter.
Note the direction of the filter.
Loosen the clamp holding the filter to the support plate and slide out the old filter.
Install the new filter in the same direction as the old one and use new copper sealing washers on the banjo connections.

Apr 08, 2009 | 1988 Volvo 740

1 Answer

Replacing power steering pump on 1992 volvo 240


yes you fill it up dont turn car on but turn the stering wheel all the way to the right and then the left do this about three times if you dont you could ruin a new steering pump and make it a loud one

Dec 19, 2008 | 1992 Volvo 240

Not finding what you are looking for?
1992 Volvo 240 Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...