Question about 2002 Pontiac Grand Am

3 Answers

My drivers side window fell inside my door. Once I removed the interior panel I found a bunch of broken Plastic Parts I need to know what to replace and have a visual to see how to reassemble.

Posted by on

  • Anonymous Apr 27, 2009

    I want to repair my broken electric side window .I have a 2002 grand am pontiac. My window just fell down and i heard a crash. How do i open up the door panel and repair the window . What tools are required to repair the job. Also if window is damaged how do i find a correct window.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

O.K. getting the door off is a little tricky, Their is even a screw hid behind the little red reflector. You should be able to locate the rest. Once you get them out, the door pops off of those little white plugs in most new cars. After that you need to purchase a power window regulator. That is what broke that made your window fall in. It looks complicated, but it is only three or so bolts to change out. If you broke the window, Call around the salvage yards to try & locate a replacement. Don't forget to make sure you get one that has tinting if your was tinted.

Posted on May 04, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

It could be the cable that runs the window up and down. I had that problem with 3 of my windows so far. I had to replace one of the window motors and just the cable on the others was the problem.
My email is: LadySpirt7@hotmail.com if ya have questions.

Posted on Apr 10, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,055 Answers

Go to auto zone and get a print out for free!!!!

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace inside door handle passenger side on a 2011 GMC Terrain?


Search Results

    How To Install Replace Inside Door Handle Chevy Equinox ...

    ? 9:02
    https://www.youtube.com/watch?v=cY6asyM2R6g
    Feb 2, 2012 - Uploaded by 1A Auto Parts
    How To Install Replace Inside Door Handle Chevy Equinox 05-09 1AAuto.com .... found your tutorial on fixing my driver's side door handle for my 2006 Equinox. .... Door Handles Chevy Equinox 2010 2011 2012 GMC Terrain ...

    How To Install Replace Inside Door Handle 2007-13 ...

    ? 9:05
    https://www.youtube.com/watch?v=QonKLwhk2CE
    Apr 2, 2015 - Uploaded by 1A Auto Parts
    http://www.1aauto.com/interior-door-handle-driver-side-front/i/1adhi00417 1A Auto shows you how to repair, install, fix,change or replace a broken or snappe... ... 10, 11, 12, 13 Chevy Silverado, Tahoe, Suburban and GMC Sierra, Yukon Denali ...2007-2011 Tahoe Yukon Suburban Escalade Vent Section ...Missing: terrain

    How To Install Remove Rear Outside Door Handle 2007-13 ...

    ? 10:02
    https://www.youtube.com/watch?v=7ZUTqqEzpZg



Feb 08, 2016 | GMC Cars & Trucks

2 Answers

1997 Toyota Rav4 driver side interior door handle broken


Parts can be had from a junk yard...remove door panel and push up on the connecting rod to open...generally, a little piece of plastic slips off or breaks inside the door. It is attached to a certain part of the rod. Should be white or clear plastic...look for the broken bits when door panel is removed so you know what you need....cheers

Jan 24, 2018 | 1997 Toyota RAV4

1 Answer

Drivers side window fell. what caused this and how do i fix it?


Broken Window Regulator Cable

Remove the inside door panel to access
the inside of door, to replace necessary parts

Jul 30, 2011 | 2002 Lincoln LS

1 Answer

Front interior driver side door handle in my 1994 Honda Accord LX is broken. How do I replace it with a new one?


remove the inside panel of the door. the arms that attach to the handle will need to be removed , ( they are little plastic clips that usually are very brittle,, so use care in removing them. ) replace the handle with the new one,, Its really pretty easy once you get the inside panel off and an actually see what your doing, good luck

Apr 22, 2011 | Honda Accord Cars & Trucks

1 Answer

2005 volvo s60 inside door latch broke


That is not true.
The handle fell off on the inside. You can remove all the screws, remove window and lock controls. Then take a large flat-tipped screwdriver gently pry off door panel. Pull up and off when loose. You will now have access to inside off door and put the rod back in the handle hole. If the plastic holder piece is broke you will need another one. Cheap.


Oct 01, 2009 | 2002 Volvo V70

2 Answers

How do i remove interior door panel & trim


Answer There is a small black plastic piece that surrounds your door handle. You MUST take that off, I find a small flat tip screw driver works best. The plastic cover that goes on the inside part of the door where your mirror is should be removed, makes it a lot easier to remove door trim: No screws on that part just grab from both sides and pull. 3 screws on bottom and 1 screw inside the armrest. The window crank, easiest way tried and true, shoestring, pull handle towards inside of car until you have enough room to fit the shoestring between crank and plastic washer. Give it a pull back and forth and it'll pop right off; clip should stick to shoestring as an added bonus.

Jun 01, 2009 | 1999 Daewoo Lanos

2 Answers

My driver window fell into the door how do I fix this


you will have to take the door panel off the inside of the door and put the glass back in its place i dont know the details for your car but if i was you i would go to an auto-parts store and buy the repair manual for you specific car it should have step by step instructions....plus it is also handy with everything else you need to know about your car hope this helps

May 15, 2009 | 2001 Saab 9-3

5 Answers

Interior Door Handle


This was a three minute repair, once I had the replacement handle. Leave the door panel alone! Remove the single screw holding the old handle in place. Use a flat blade screwdriver to jimmy the old handle away from the door about an inch. There are two plastic clips holding it to the rods, one for the locking mechanism and one for the latch. Use the flat blade screwdriver to unclip these two connectors. Remove the broken latch, and don't worry, the rods won't disappear into the door! Reverse these steps with the new handle (insert rods, attach clips, wiggle assembly into place, and fasten with single screw). You're done!

Oct 18, 2008 | 2000 Hyundai Elantra

4 Answers

Door window on 2000 jaguar s type


take off inner door panel, lower track and put the window back in. If parts on track are broken buy new ones. Use urathain to reinstall window.

Jul 28, 2008 | 2000 Jaguar S-Type

4 Answers

Door panel removal


My window has dropped down on the drivers side and I can hear the motor working but the window is down in the door panel and won't come up. How do I get the door panel off to see if the window can be placed back on track. I see 1 screw only and after unscrewing it panel is still firmly attached. Please help . I need to know how to get this door panel off.

Thanks,

Rick

Jul 06, 2008 | 2000 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

420 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...