Question about 1998 Plymouth Voyager

1 Answer

It is really hard to make turns. check power stering fluid ok

I think the power steering on my 98 plymouth voyager went out. it is realy hard to turn my steering wheel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 14,036 Answers

Check power steering fluid if real real low you have a leak at hoses or pump seals.if all is good check for low tires and lack of lubrication to at ball joints and tie rod ends. if all is good you have power steering pump failure.

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Can i put brake fluid in my power steering 94 plymouth grand voyager?


Never brake fluid and nothing else goes in brake master cylinder.

Put power steering fluid or automatic transmission fluid (dextron)

May 04, 2014 | 1998 Plymouth Grand Voyager

2 Answers

My power stering is not working ok i have replace the power stering pump and i have check the sector and it is ok the car work well when it is runing but when i stop it turn hard i have check if it is air...


Power Steering Fluid Filling & Bleeding
  1. Repair the power steering system.
  2. Turn the engine OFF.
  3. Raise the vehicle so the front wheels are off the ground.
  4. Turn the steering wheel all the way to the left.
  5. Fill the power steering fluid reservoir to the FULL/COLD level and leave the cap off.
  6. Have an assistant watch the fluid in the reservoir while you turn the steering wheel fully to the right and fully to the left at least 20 times. NOTE: On systems with long return lines or fluid coolers, turn the steering wheel from lock to lock at least 40 times.
  7. Add fluid as needed to keep the fluid level at the FULL/COLD level.
  8. Install the reservoir cap and start the engine.
  9. Center the front wheels and lower the vehicle.
  10. Run the engine for about 2 minutes.
  11. Turn the steering wheel in both directions and verify correct power steering operation.

Nov 10, 2010 | 1997 Chevrolet Tahoe

2 Answers

Power steering


I would check the power steering belt, next the fluid and go from there!

Feb 12, 2010 | 1997 Plymouth Breeze

2 Answers

98 F.Windstar replace power steering pump but still hard to steer


rack and-or pinion... Good thing the 98 is a very good and popular windstar, its not as bad as it sounds.

Aug 16, 2009 | 1998 Ford Windstar

1 Answer

Car stering wheel is hard to turn left or right


your power steering pump has a cap on it.you have cold mark and hot mark.when car is cold engine not running.when you remove power steering cap it should be on cold mark.if not add until you get to cold mark on cap stick..dont over fill or you blow the seal.now when engine is hot been running.turn off car check.power steering cap should read full hot.mean level is correct.when you first check power steering fluid and it was real real low.you got a leaking high pressure hose.or power steering pump seal is leaking.if all check out good.your problem could be low tire pressure.worn ball joints.and tie rod ends.rack and pinion steering gear binding.

Jul 29, 2009 | 2001 Hyundai Elantra

1 Answer

Power steering


if you have to keep adding fluid it hasto be leaking it somewhere.
Have someone work the steering whell back and forth going all the way and make it work a little each way meaning turn it right all the way till it won't turn an hold it so it winse and the same way the other way.The leak should show up

Jan 10, 2009 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
1998 Plymouth Voyager Logo

575 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...