Question about 1999 Nissan Pathfinder

2 Answers

Nissan Terrano II 2.7TDi clutch drop

My 1999 Nissan Terrano II has a very soft clutch. The peddle occassionally drops to the floor and I have to lift it and pump it a couple of times to reactivate it. It then works OK for a while. Master cylinder rebuilt, slave replaced, hose relpaced, line bled but still problem recurs - any solutions out there to help me here?

Posted by on

  • Anonymous Mar 18, 2014

    overdrive dosnt work properly

  • Anonymous Mar 18, 2014

    overdrive

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi I had a simular problem with my pedal sticking down it turned out to be a small white clip that had worn were the pedal return spring sits it had chaffed a recess in the white clip and was snagging, the clips are about £3.50 so its worth a look, best way i found was to take the pedal box out and do it dont forget the bolt above the pedal you can reach it with a socket, the other two hold the master cylinder on.
Phill

Posted on Jun 08, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 710 Answers

Sounds like air in the lines. there should be a bleeder valve on the slave cylinder. Have someone hold the clutch pedal while you open the bleeder screw to let the air out while making sure the reservoir is full of brake fluid.This make take a few tries to eliminate all the air.

Posted on Apr 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HI. The clutch peddle on my citroen C4 1.6 HDI stays on the floorboard when pushed please help.


Check this forum:
http://www.citroenpicasso.org.uk/picasso/index.php/topic/18177-sticking-clutch-pedal/

Sep 21, 2016 | Citroen Cars & Trucks

1 Answer

Toque settings for a Nissan Terrano II R20 SE 2.7tdi


go google --type in torque settings for ---your engine-- and there will be pages of settings and the correct sequence to do the process all in pdf form

Aug 08, 2015 | Nissan Cars & Trucks

1 Answer

Clutch peddle is low to the floor


Sounds like you need to adjust the linkage or possibly change the cable. You might need to change the clutch and pressure plate but that doesn't seem likely. I would start with the linkage.

Mar 26, 2014 | 1991 Nissan Stanza

1 Answer

91 300zx Turbo idle issue


I believe what you're gonna fnd out is that's what's suposed to happen, it saves power and gas.

All three of my vehicles (2 trucks and 1 car) do the same thing

Thanks Terry

Mar 14, 2014 | 1987 Nissan Sentra Wagon

1 Answer

Nissan terrano 2 3.0L SVE loss of power under


Go and have the computer scanned for codes. Go from there, otherwise you are just firing the parts cannon at the problem.....

Sep 30, 2013 | 2005 Nissan Terrano 3.0

1 Answer

Accleration problem


try the Maff cleaning or replacent it cures few terrano problems

Jun 05, 2013 | 1999 Nissan Terrano

1 Answer

1996 nissan maxima clutch squeals pedal stuck to floor


Sound like you're going to need a whole new clutch assembly, but if the fluid level was dry you may have sucked air into the system which means that the clutch will have to be bled at the slave cylinder, just like you would brakes. The squealing sound is coming from the throw out bearing, usually when the do that it means that the bearing is frozen and cannot spin. Either way it looks like you'll be dropping the transmission to work on the clutch.

Jan 30, 2013 | 1996 Nissan Maxima

1 Answer

I own a 1995 Audi 90cs. My clutch peddle started being dead tell half way down then got preshure. Now there is no preshure and the peddle sticks to the floor. There was no slipping in the clutch so I


You need to replace the clutch slave.....Ii recently did mine, after the installation it was stuck too.......the way I fix it was I had a friend pumping the clutch by hand while I bleed it under the car, it took about 15-20 minutes before it got hard again.
Good luck!

Aug 01, 2012 | 1995 Audi 90

Not finding what you are looking for?
1999 Nissan Pathfinder Logo

2,267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...