Question about Jeep Cherokee

1 Answer

How to remove transmission

I need to know how to remove the transmission from a 96 cherokee with a straight six engine and automatic transmission

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Unit is a unbolt, remove , replace and bolt in excercise. The difficult part is moving it around without the specialized jacks used in a trans shops. Alignment when replacing is critical or you can damage components. You can get detailed instructions in any decent manual. Always replace converter with trans and always change oil on unit before start up. It's also a good idea to blow out cooling lines so you don't transfer any debris to new unit. Though I generally refrain from doing this kind of work in the yard, I've found that using two long (sometimes two foot long) threaded rods put through bellhousing bolt holes and into the back of the block in their matching holes, can be a valuable guide as you slide the unit into place. They don't have to remain straight, but as trans gets close to block it will follow the bolts into proper position. To remove them I bend the free end at a right angle and just screw them out.

Posted on Apr 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for the firing order to this 1996 jeep Cherokee 4.3 or straight six engine don't know what it is call


all i6 are some
153624
you change out spark plug wires not marking cap first?
the 96 , is 4.0L and 2.5L not 4.3. so.....
why use wrong engine name?
they made 5 million 4.0L

rtm , the book shows how to replace parts and not make errors
and not get hurt.


http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service


XJ jeep it is 1996 , if not in usa say so, as jeep does make export models, and uses different parts. so......................?

Mar 12, 2015 | 1996 Jeep Cherokee

1 Answer

Where is the crank sensor located


it is on top of the transmission on the drivers side . you can see it from under the jeep

Dec 31, 2012 | 1998 Jeep Grand Cherokee

1 Answer

Is a 1998 automatic transmission the same as a 1996 automatic transmission in a grand jeep cherokee


Hi, the automatic transmissions are made in Kokomo Indiana. Arnt you glad you know that now??? The President visited that very plant yesterday. Anyhow, the easy answer here is that if the engines are the same size then they are PROBABLY the same transmission. If you have one that is a six banger and another is an 8 then they still could be ....

Hope that helps

Nov 25, 2010 | 1996 Jeep Grand Cherokee

2 Answers

Transmission removal pictures for a 1996 ford explorer..i need to know how many bolts there are to remove the transmission from the motor


4x4 has seven transmission-to-engine bolts
4x2 has six transmission-to-engine bolts

You need to tell me though if this is an automatic or manual and 4x4 or 4x2 There are 3 different auto trannys: 4R44E, 4R55E then A4LD and 4R70W

Sep 06, 2010 | Ford Explorer Cars & Trucks

1 Answer

How To Change A Fan Belt On A Jeep cherokee 96


That depends on which engine you have. On v8 engines you need to put a wrench on the tensioner pulley and pull it over. On six cyl and four cyl engines there is an adjustment bolt on the power steering pump. Loosen the pump slide bolts and turn the adjustment bolt that moves the pump in and out of adjustment. (bolt runs under the pump...long threaded rod with a bolt head)

Jun 09, 2010 | 1996 Jeep Cherokee

1 Answer

Hi, I'm looking for a diagram on the firing order for a 96 Jeep Cherokee Sport. I am in a wheelchair and need my vehicle running in case health issues arise. Thank you very much


six cylinder engine is; 1-5-3-6-2-4 and v8 is; 1-8-4-3-6-5-7-2 number 1 plug is on drivers side in front of engine. right front, faceing engine.

Apr 24, 2010 | 1996 Jeep Cherokee

2 Answers

My son has a 96 ford explorer wants to know what's engine and transmission size?


the 8th vin digit is the engine size. but in 96 they only had 2 V6 is 4.0L....., V8 is 5.0L

Oct 20, 2009 | 1996 Ford Explorer

3 Answers

1996 Jeep Cherokee will turn over but won't start.


Sounds like a bad crank sensor, I don't have a photo but it bolts to the top left of the transmission just behind the valve cover on the drivers side. Its easy to install with no adjustments needed

Jul 25, 2009 | 1996 Jeep Cherokee

1 Answer

Transmission type


any transmission that is for a straight six engine. doesn't matter what car it comes out of as long as it is hooked to the same engine it will bolt up to yours.

Mar 10, 2009 | 1990 Ford Bronco II

1 Answer

1998 and 2000 jeep grand cherokee


This Info taken from Wikipedia, the free encyclopedia
http://en.wikipedia.org/wiki/Grand_Cherokee
Hopefully this will answer your question.

The redesigned WJ 1999 Grand Cherokee shared just 127 parts with its predecessor. The structure was stiffened by PorscheEngineering for sharper steering and lighter weight. The spare tire wasrelocated from the side of the cargo compartment to under the floor togreat relief of owners. The two heavy pushrod V8 engines were replaced by chrysler's first clean sheet V8 since the 60's (SOHC aluminium heads, plastic intake), Chrysler's then-new PowerTech. Although this engine produced less torquethan both previous V8s, it was lighter and got much better fuel economyand provided similar on road performance figures (the 23 gallon fueltank was replaced with one of a 20.5 gallon capacity). The Inline 6engine was also updated in 1999. 10 horsepower (7.5 kW) was added byredesigning the intake manifold. The manual transmission was dropped with this model.
While other Jeep vehicles used the Mopar 5 x 4.5 bolt circle, thiswas the first Jeep following the 1987 Chrysler buyout to receive awider bolt pattern — 5 x 5. The 5 x 5 bolt pattern (also 5 x 127 mm),although common to GM rear wheel drive vehicles and light dutytrucks/vans, has spread beyond its use with GM (and Ford with their 1973 to 1978 LTDs and Lincolns). Chrysler first used the 5 x 5 pattern on full-size half-ton Dodge Ram pickups and Dodge Ramcharger SUVs in 1986.
A notable feature available in this generation was the automatic four wheel drive option called Quadra-Drive II.With three viscous clutches, it was one of only a few four wheel drivesystems at the time with triple locking differentals, joining thecontemporary Mercedes Gelandewagen, Mercedes Unimog and Magna SteyrPinzgauer, and the only one of the four with fully automatic operation,although the axle differentials could not be manually locked like inthe other three vehicles.
The 45RFE and 545RFE automatic transmission in the WJ was notable. It included three planetary gearsets rather than the two normally used in a four-speed automatic. Thisgave it six theoretical speeds, and it would have been the firstsix-speed transmission ever produced in volume, but it was programmedto only use five of these ratios. Four were used for upshifts, with adifferent second gear for downshifts. Although five of the six ratioswere used, Chrysler decided to call it a "4-speed automatic". In 2001,the programming was changed to make use of all six ratios. Rather thanhave six forward gears, the transmission was programmed to act as afive-speed with the alternate second gear for downshifts. The RPM at70 miles per hour (110 km/h) on a 545RFE is 2000 rpm, 200 rpm less thanthe 45RFE programming. 1999 and 2000 model year WJ owners can havetheir 45RFE transmission's programming flashed to enable the extra gearas both transmissions are physically the same. The 42RE 4-speedautomatic remained the transmission for the Inline 6 engine. It was notchanged from the previous model Grand Cherokee's.

Feb 14, 2009 | 1998 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...