Question about 1998 GMC Suburban

Open Question

Airbag removal 1998 gmc suburban

How to remove airbag 1998 gmc suburban

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
leetamara
  • 702 Answers

SOURCE: 1994 GMC Suburban front hub / bearing removal

Knock the wheel studs through the assy.

Posted on Jun 09, 2008

Ad

SOURCE: remove transmission from a 1996 gmc suburban

the lower hose that comes from the radiator is solid, thats it go to the lower fitting on the tranny

Posted on Oct 21, 2008

  • 12 Answers

SOURCE: removal of power steering pump on 1998 GMC Sierra 1500

you need a power steering pump puller the rest is simple any trouble let me know

Posted on Dec 24, 2008

  • 21 Answers

SOURCE: 1998 GMC Jimmy with "turn signal" clicking behind glove box

I have a 1998 GMC Jimmy SLT with same exact problem. I just determined exactly what it is today.
Here is what you should do:

1) Open glove box

2) Notice the u-shape mechanism that prevents the glove box from folding all the way down. (located near top left corner of OPEN glove box

3) Empty contents of glove box and then push up on U-shape and open glove box so that it hangs freely

4) Notice the wiring harness with a bolt in middle of it (located behind glove box)

5) To the right of the wiring harness is a small black box with a zip tie over it. This is the source of your problem. Just slide the zip tie to the right so that the box can then be pulled out.

This is your combination flasher for turn and hazard signals. My signals still worked while this annoying little thing kept clicking. The model # is GM11516051. You can find one on e-bay for at least 1/2 the price of the dealer's.

Posted on Jun 06, 2009

  • 1986 Answers

SOURCE: door panel removal

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How o replace airbag sensor on a 1998 gmc serria


Unplug one battery cable. Locate old air bag sensor near radiator support, which has the easy to locate yellow connector. Unhook yellow connector, remove bolt, then remove. Reverse order to reinstall, but don't forget to reattach batter cable.

Jan 26, 2015 | 1998 GMC Sierra

1 Answer

How do I change the inside headlamps on my 1998 Suburban?


It depends, if you have sealed beam headlamps, there should be a frame around headlamp, remove it.
If composite headlamps, there are two hex headed pins in top radiator support, remove those pins. Take out lamp assembly so you can get at bulbs.Don't touch new bulbs with bare hands.

Dec 17, 2014 | 1998 GMC Suburban

1 Answer

2004 gmc envoy. Horn doesnt work, The alarm horn works but not the drivers horn


THE WHOLE HORN PAD AND AIRBAG IN STEERING WHEEL HAS TO BE REPLACED.BECAUSE HORN PAD BUILT IN THE AIRBAG.IF YOU GOING TO REPLACE AIRBAG IN STEERING WHEEL YOUR SELF. DISARM AIRBAGS BY FIRST TURNING OFF RADIO,THEN REMOVE NEGATIVE BATTERY CABLE,WAIT 20 MINUTES FOR AIRBAGS DISCHARGE.BEFORE REMOVING THE AIRBAG HORN PAD.

Jul 11, 2011 | 2004 GMC Envoy

1 Answer

How to replace a idler arm and pitman arm need to replace it on my 98 gmc suburban 4x4


You will need the proper tools to remove them which can be rented at auto parts stores. The pitman arm has to pulled off with an pitman arm puller also have to drop steering box I believe to change it. I know we did on my 1996 Tahoe the idler arm can be seperated with a front end fork also available at parts store. You just drive it between the idler arm and tie rod after removing castle nut and cotter pen.

Jul 17, 2010 | 1998 GMC Suburban

1 Answer

How do you replace the cruise control switch assembly on 1998 suburban?


You will need to pull steering wheel off which requires steering wheel puller and remove locking mechanism underneath wheel which also requires another special tool unless you are experienced at this you can sometimes remove them with a pic and pliers. Very difficult without tool! From that point you just take out the old switch and put it back the same way you took it apart.

Jul 01, 2010 | 1998 GMC Suburban

1 Answer

How do i replace the door handle on a 1998 gmc suburban


remove the inside door trim to gain access to the inside of the door, there may be plastic covering the large openings in the back of the door panel, you have to remove that as well to gain access to the rear of the door handle.
there will be a couple of nuts or bolts that you have to remove and also a metal rod which connects to the handle, once these are removed you should be able to remove the handle from the door

Jun 13, 2010 | 1998 GMC Sierra

1 Answer

Problem for GMC 1998 Suburban DIESEL DIES while


Its called the fuel pump cylinoide which is attached to the fuel pump. Unless the fuel pump is bad, you got an expensive part to buy around $2500 or the cylinoide is $900 whichever is broken. This is a know issue for GMC deisel suburbans 6.5.

May 12, 2010 | 1998 GMC Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...