Question about 2008 Pontiac Vibe

1 Answer

What is the exact wheel nut torque

I'd like to know the exact wheel nut torque on a 2004 pontiac vibe with mag wheel or not.

Posted by on

  • Anonymous Mar 21, 2014

    its a 12 point

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

Vibe 2003-05 75 ft-lbs

Posted on Apr 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Axle nut torque


Front Propeller Shaft Retaining Nut
181 N·m
134 lb ft

Jan 27, 2017 | 2006 Pontiac Vibe

1 Answer

Wheel studs lost on 2004 Pontiac Sunfire while driving


not sure what your asking, but they usually come off if the threads on the stud are too worn or the wheel nut is worn or damaged. they can be replaced both studs and nuts. this is why its recommended to use a torque wrench to tighten wheel nuts and not an impact gun.

Sep 24, 2015 | 2004 Pontiac Sunfire

2 Answers

Lug nut torque chart


Here's a handy link to the wheel nut torque settings for hundreds of different vehicles.
Look your's up........and away you go!
http://www.discounttiredirect.com/infoCenter/infoWheelTorque.html

Jul 30, 2014 | 2004 Pontiac Montana

1 Answer

Can you drain torque converter when changing transmission fluid on a 2004 pontiac vibe


Basicly just remove the bolts in the transmission oil pan, make sure you have a drain pan under it and leave a couple bolts in, loosen the remining bolts and let the oil drain then loosen and remove them slowly as oil will be draining out while you are doing it.

Change the filter and after cleaning the pan install a new gasket and put it back on. Do not tighten the bolts too tight because it will distort the gasket and it will leak.

Pour about 5 quarts of transmission fluid in the trannsmission and start it up, look for leaks, and finish filling it to the cold line on the dip stick. If there are no leaks run until its warmed up and make sure the fluid level is at the full hot line on the stick.

There is really no way to drain the converter.

Jan 09, 2013 | 2004 Pontiac Vibe

1 Answer

How to replace front wheel bearing on an awd 2004 pontiac vibe?


Hi, the front does not have a "wheel hub assembly". It is an individual sealed roller bearing that has to be pressed on and off the front spindle. It is a Toyota thing!
Take care

Aug 04, 2010 | 2004 Pontiac Vibe

1 Answer

Torque spec for 2004 vibe front axle nut


Hello there is no specific torque on this nut torque it witch an inpact tool or a long bar and make sure to locked it witch a cutter pin or if there are a recess in your axle punsh the nut in the recess witch a punh.

Mar 08, 2010 | 2004 Pontiac Vibe

1 Answer

What should torque be on the large bolt that holds the front hub assembly/wheel bearings onto front axle?


don't have exact # for that one, but generally anything better than 75lbs is enough...most shops just use an airgun on it and don't have any problems...One rule...Don't back off on nut if you have a cotter pin that needs to be installed. Always tighten further to align holes. On ones that don't have pin, use new nut only...it has an "interference" thread that helps keep it in place...once removed it looses that feature to some extent. Sounds like "backyard" advice but have done this for years and haven't lost one yet!
Good luck!

Mar 26, 2009 | 2004 Pontiac Vibe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,083 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...