Question about 1996 Nissan Altima

1 Answer

1996 nissan altima can't tell if I need a new clutch or....

I can't get 1996 altima in gear. I 1st. thought clutch, then master/slave might not be working. how can i tell clutch is So much more. Can some one please tell me a good way to know which I need , without taking itapart. I guess I'm hoping to help with the sympton's.HELP ME

Posted by on

  • yadayada
    yadayada May 11, 2010

    tell what happens when u press the clutch pedal.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

If its a hydralic cluch it has a piece of metal that sticks out right after the bell houseing
and when you step on the clutch it should move if not you ether are low on fluid or master is gone

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 nissan altima with manual 5 speed transmission is stuck in 5th gear and will not come out. any ideas?


if cables are used to change gear to the gear box check those

shift stick bush worn ..remove center console

internal gearbox shift rods syncro / scroll pin broken

clutch system master or slave or pressure plate issue

26305420-3e2421cvrq3gbi5qdx1z4rjm-3-0.jpg26305420-3e2421cvrq3gbi5qdx1z4rjm-3-2.png

Oct 08, 2016 | 1998 Nissan Altima

1 Answer

I think my clutch went out in my 96 nissan pickup it will change gear aft it runs a while. If stop u have to turn the trk off to get it bcl in 1st or anygear


I suspect an air in the hydraulic system or problem clutch slave or master cylinder
the having to stop to select a gear indicates that the pressure plate is not being properly moved as a result of not enough movement in the slave cylinder
that can be air ( bleed the system-check fluid level) or problem master cylinder --- replace
clutches either work or they don't so leave the clutch idea as a very last resort

Sep 02, 2015 | Nissan Cars & Trucks

1 Answer

Car won't go in gear


ok clutch dont have flywheel. is just clutch on pressure plate. depending on mileage and use of car clutch will go bad and needs replacing.

Dec 16, 2013 | 2003 Nissan Altima

1 Answer

Slave cylinder 2001 nissan altima


Check the linkage under the dashboard. Many companies use cheap plastic clips that get very brittle over time.

May 13, 2013 | 2002 Nissan Altima

1 Answer

Hydraulic clutch in a 2001 nissan altima gxe 5 speed manual


Open the hood and look for the clutch master cylinder.
It is smaller than the brake master cylinder, but should be very near it.
The clutch master cylinder is about half the size of the brake master cylinder.
Take the lid off and see if it is full.
If it is empty, the likely problem is the slave cylinder (which is mounted on the transmission at the other end of the brake fluid line), has failed and needs to be replaced.
It will likely not do any good to fill the clutch master cylinder, as you will trap air in the line.
The slave cylinder will need to be replaced, and the line bled to get the air out.
Be blessed.

Apr 12, 2013 | 2001 Nissan Altima

2 Answers

1997 nissan altima 5 speed manual transmission will not shift, is it the clutch, master cylinder or slave cylinder?


first check to see if you have any fluid in the clutch master cylinder which is mounted by the firewall on l/h side of car. if fluid is inthere, follow the line/hose to the transmission. this line/hose goes to slave cylinder mounted somewhat on the front/top of trans with 2 bolts. that is the slave. have someone push the clutch as you are watching the slave cylinder for operation. it should move with clutch beeing pressed. if it doesnt move than you have a hydraulic issue/leaking master cylinder. if it moved nicely, tha i would be looking at the clutch.

Oct 01, 2011 | 1997 Nissan.5 Altima

1 Answer

Hi. I have nissan almera 1996, 1.4 manual. I am getting some grinding sound when I move in 1st and 2nd gear, and a little bit when the car is stationary but switch on. The sound disappears when I press...


sounds like your thought out bearing is making noise which is not that big a deal right now and the second thing is that it sounds like you aalso have a synquinizer that is going bad. In this case you would need to have the trans rebuilt to fix problem or chance a used one.

Jul 08, 2011 | 1996 Nissan Altima

2 Answers

My 1994 Nissan Altima's clutch is leaking fluid and the clutch goes all the way down to the floor, it will not go into gear


The solution is pretty cut-and-dry. Fix the fluid leak and your transmission will go into gear. I don't know what to tell you to fix exactly because I do not know where it is leaking from. If it is leaking from the slave cylinder, replace the slave cylinder; If it is leaking from the master cylinder, replace the master cylinder, etc.

Fixing just one part of the clutch may not be the best option for you however. Clutch parts seem to wear out all within a few thousand miles of one-another. Depending on how many miles are on your vehicle you may want to do a complete clutch replacement so you won't have any further clutch problems for several years.

Apr 29, 2011 | 1998 Nissan Maxima

1 Answer

1994 Altima clutch master and slave replacement


easy replace both parts then fill the clutch reservoir,crack slave cly bleeder to let gravity bleed let 1 to 2 reservoirs flow through,tighten bleeder and pump clutch pedal,pump 4 or 5 times hold down pedal get 2nd person to crack bleeder while pedal is down,tighten bleeder before releasing pedal,should work fine

Nov 04, 2009 | 1994 Nissan Altima

1 Answer

Problem with 1993 nissan altima PLEASE HELP


It is a clutch problem. Do you know if you have a hydraulic clutch or a clutch cable? If you have a cable, it might need adjusted. If you have hydraulic you might have a bad slave cylinder or clutch master cylinder.

Apr 02, 2009 | 1993 Nissan Altima

Not finding what you are looking for?
1996 Nissan Altima Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...