1. Turn ignition switch on but don't start the engine. Push ENG MET button on the trip monitor ONE time.
2. Press ENG MET one more time within 5 seconds. Within 5 seconds press and hold the RANGE button (90-94) or the GUAGE button on 95 Vettes, you will see the light start to flash
3. When light stops flashing the CHANGE OIL LIGHT has been reset
Reset it .. You will have to get out the book in the glove box and read up it will tell you how to reset it after each oil change.. I am not sure because there are so many different ways.. but read the book it tells you how to reset the oil change reset thanks Jerry
i have a 1997 chevy suburban 161000 miles. when i shift into 4 low, the 4 hi light is on, but the 4...
(More)
i have a 1997 chevy suburban 161000 miles. when i shift into 4 low, the 4 hi light is on, but the 4 low light only blinks. it will NOT engage in 4 lo. any suggestions?? thanks a mil