Question about 2002 Chevrolet TrailBlazer
Intake must be removed on these 4.2L I6 to access the RH side valve cover bolts. Hopefully this helps
Posted on Jul 16, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
ALL DATA time to R&R valve cover gaskets both sides is 2.1 hours. you will need to remove brackets and connectors on either side, It will also help to take the upper plenium bolts out but not completly pull the plenium. If you don't have a lot of mechanical experiance and some basic tools. you may want to consider to have a local a shop to perform this service for you after you get a estimate. RON.
Posted on Jan 18, 2009
This is actually an easy swap out. Remove the electrical connection, remove the retaining bolt and pull out old one. I believe the sensor is located in the front passenger side of the engine on this particular model.
Posted on Aug 16, 2008
I don't have experience with this engine but guess you won't have to remove it for valve cover gasket work but perhaps can lift it a bit [not by hand!] after loosening engine mounts.
Posted on Nov 18, 2008
you dont remove the front cover, open the hood look behind the headlight and turn the bulb couter clockwise, and replace the bulb in the headlight.. good luck keith...
Posted on Mar 21, 2009
The first step is to remove all the parts that are in the way of you being able to remove the valve covers. (Ex.: air intake, loose wires etc.) Then you will need to remove your valve covers (using basic tools) and be very careful to not let anything get on your lifters, which your valve covers protect. Once you have the valve covers off compare the new gaskets to make sure they are the right size. Then remove the old gasket and replace with the new one using a high temp gasket sealant (available at any auto parts store) to attach the gasket to the valve covers. Then tighten down snug and check for leaks after replaced.
Posted on May 06, 2009
Tips for a great answer:
Jul 19, 2016 | 2002 Chevrolet TrailBlazer
Mar 24, 2013 | 2004 Chevrolet TrailBlazer
Aug 28, 2012 | Cars & Trucks
Jun 26, 2011 | 2004 Chevrolet TrailBlazer
Aug 27, 2010 | 2002 Chevrolet TrailBlazer
Nov 29, 2009 | 2002 Chevrolet TrailBlazer
Apr 06, 2009 | 2002 Chevrolet TrailBlazer
Jul 01, 2008 | 2002 Dodge Stratus
717 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: