Question about 1984 Chevrolet Chevy

1 Answer

I need a diagram of a 1984 chevy diesel engine. I need to know the size of the engine and the size of the starter housing. It would also be nice to know the frame and engine schematics as well.

Posted by on

  • yadayada
    yadayada May 11, 2010

    Once again how do u know the info is not in a factory chassis service manual??

  • yadayada
    yadayada May 11, 2010

    go on line and find a used factory service manual.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

I guess you have a 6,2 litres V8 and you can take it from there,The army have some good sites.

Posted on Aug 26, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 1984 1/2 ton 4x4 chevy

get a new starter

Posted on Jul 26, 2008

SOURCE: fuse box diagram 1984 F-150

I regularly use the local library. They have repair manuals that you can check out. Also have electrical wiring diagram books for foreign and domestic that you can make a copy of to take home.

Posted on Mar 11, 2009

  • 2002 Answers

SOURCE: drive belt schematic for 1984 chevy 6.2L diesel




I have an 82 6.2 and I suspect they are the same. The innermost belt runs over the fan to the A/C unit and down under the power steering back to the crank. The middle belt runs over the fan to the power steering. The out side belt runs over the fan to the alternator. Hope this helps.









Posted on Aug 15, 2009

  • 7353 Answers

SOURCE: i have a 1984 winnebago with 454 chevy the starter

the 10gauge purple wire on the solenoid should be HOT when starting. could be ignition switch or neutral saftey switch.

Posted on Oct 01, 2009

thunderalley
  • 432 Answers

SOURCE: my horn seems to be missing some parts to make it

autozone chilton manual for around 10.00 dollars

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 f-250 will not turnover with key it will turn by jumping the solenoid but no fire


Do you know how to do automotive electrical testing ? With a Volt meter ? How to use a wiring diagram to find test points in a electrical circuit ? What engine does it have , gas or diesel ? Size ? Automatic or manual transmission ?
How to voltage drop test starter motor circuit
Free wiring diagrams here
http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model and engine size . Under system click on engine ,then under subsystem click on starting . Click the search button ,then the blue link .Test for control at the relay .

Jun 06, 2017 | Cars & Trucks

1 Answer

Where is the starter located at on my 1984 cutlass supreme brougham


no engine option stated. gas or diesel?
on the engine.
very near the flywheel teeth
very much attached to the bell housing.
  1. Disconnect the negative battery cable at the battery.
  2. Raise the car and support it with jack stands.
  3. Remove any starter braces or shields that may be in the way. The exhaust crossover pipe may need to be removed on single exhaust models. Disconnect the wires on the starter if they can be reached.
  4. Remove the two starter motor to engine bolts, and allow the starter to drop down, but not hang on the wires.
  5. Remove the solenoid wires and battery cable and remove the starter.

look here, see those engines and photos
most are lower left side.
left means, sitting in drivers seat.


http://remanufactured.com/Oldsmobile_engines.htm

Jul 04, 2014 | Cars & Trucks

1 Answer

How to remove starter on 1984 chevy celebrity


According to manuals starter removal is dependent upon the engine type used however I looked at a 1984 Celebrity with 2.8 L X version enigne and both mog my repair manauals which toild me nothnig aobut the fiornt frame of htis vehicle being in the way of the starter mounting bolt nearest the engine hence it appered to me one woulde need to raise the engine if it could be raised enough or remoive the negine., If nyone have remoived thios startewr pelase let me know hw, okay/

Jun 13, 2012 | Cars & Trucks

1 Answer

1984 g 20 chevy van vaccum diagram


Check this diagrams and click over images for zoom...

zjlimited_2093.jpg

Fig. 101: 1984 4.1L engine-Federal and high altitude with manual transmission (G10, 20 and 30 models)


zjlimited_2094.jpg

Fig. 102: 1984 4.1L engine-Federal and high altitude with manual transmission (G10, 20 and 30 models)


zjlimited_2095.jpg

Fig. 103: 1984 4.1L engine-Federal with automatic transmission (G10, 20 and 30 models)


zjlimited_2096.jpg

Fig. 104: 1984 4.1L engine-Federal with automatic transmission (G10 and 30 models)

If you have any other questions or need that I send you some other diagram, please feel free to get back to CONTACT US HERE.

Also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Oct 28, 2011 | 1984 Chevrolet Chevy

2 Answers

I need a vacuum line diagram for a 1984 cadllac coupe deville


zjlimited_803.gif

Fig. 31: Vacuum circuits - 1984 V8 4.1L engine Fed. and High Alt. (DFI)


zjlimited_804.gif

Fig. 33: Vacuum circuits - 1984 V8 4.1L engine Calif. (DFI)

Hope helps. Just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment. Have a nice weekend and thanks for using FixYa.

Jose.

Oct 18, 2011 | 1984 Cadillac DeVille

3 Answers

I need the fan belt diagram and the belt numbers for a 1984 Chevrolet Motor Home.


Hopefully this diagram will help. As for the belt sizes, I would suggest using a thick nylon rope routed around the pulleys and then measuring the length. When purchasing the belts enquire as to the store's exchange policy in case you get it wrong.

6186eb2.jpg

Oct 04, 2010 | Chevrolet R30 Cars & Trucks

1 Answer

1988 Chevy Tahoe Starter going out. Need to replace


Generally starters have 2 or 3 bolts and a thick wire coming from the battery and other miscellaneous connections.

You did not specify a vehicle that was on my list, i.e. 1988 Chevy Tahoe.

However, it may be similar to a Suburban R10:
REMOVAL & INSTALLATION The following is a general procedure for all trucks covered in this manual, and may vary slightly depending on model and series.
  1. Disconnect the negative battery cable at the battery.
  2. Raise and support the vehicle.
  3. Disconnect and tag all wires at the solenoid terminal. NOTE: Reinstall all nuts as soon as they are removed, since the thread sizes are different.
  4. Remove the front bracket from the starter and the mounting bolts. On engines with a solenoid heat shield, remove the front bracket upper bolt and detach the bracket from the starter. Fig. 1: Starter mounting location — 4.8L engines 84903021.gif
    Fig. 2: Starter mounting location — 4.3L and 5.0L engines 84903022.gif
    Fig. 3: Starter mounts — 5.7L and 7.4L engines 84903023.gif

  5. Remove the front bracket bolt or nut. Lower the starter, front end first, then remove the unit from the truck. To install:
  6. Position the starter and tighten all bolts as follows: R/V Series:
    • Thru-bolts: 40 ft. lbs. (54 Nm)
    • Bracket bolt: 30 ft. lbs. (41 Nm)
    • Nut (gas): 11 ft. lbs. (15 Nm)
    • Nut (diesel): 90 inch lbs. (10 Nm)
    C/K Series:
    • Thru-bolts: 35 ft. lbs. (45 Nm)
    • Bracket bolt (diesel): 24 ft. lbs. (33 Nm)
    • Nut (diesel): 75 inch lbs. (8.5 Nm)
  7. Reconnect all wires. Fig. 4: Disconnect the negative battery cable 87982p25.jpg
    Fig. 5: Remove the starter retaining bolts 87982p30.jpg
    Fig. 6: Remove the starter from the vehicle 87982p31.jpg
prev.gif next.gif

Jul 19, 2010 | 1984 Chevrolet Chevy

1 Answer

I have a 1984 chevy 454, How do I get a belt diagram ?


go right to autozone and ask them to print it out for you. they will have no problem doing that for you

Dec 08, 2009 | 1984 Chevrolet Chevy

3 Answers

I need a layout of where the vacum hoses on a 350 chevy go on a 84 full size blazer where can i get this?


fb818de.gif
1984 350 (5.7L) V8 engine—4bbl federal and high altitude with automatic transmission


Let me know a few specifics for an EXACT diagram for you....transmission, carb size, things like that.....you can also email me hydro83282@gamil.com and I can send you more. FREE--NO CHARGE!!!

Oct 17, 2009 | 1978 Chevrolet C1500

1 Answer

Can't reconnect the vaccum hoses to my 4 barrel carberator (1984 chevy 350) because I don't know where they go... where can I get a diagram?


I'm not sure if your engine has sensor's in the thermostat housing or not, my trucks didn't have original engines in them but the following should get you running.
The front lower left nipple goes to the distributor. The upper left goes to the vacuum secondary's on your carb. PCV goes to the bottom middle in the front. EGR goes on the front whereever you can plug it in, the same for the air cleaner. The brake booster threads in the bottom at the back. Your kickdown for the trans plugs into the intake at the back of the carb. Block of the rest and you should be on the road. Hope this helps.

Sep 05, 2009 | 1984 Chevrolet Chevy

Not finding what you are looking for?
Cars & Trucks Logo

566 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...