Question about 1993 Lexus Es 300

3 Answers

93 lexus es300 overheating - 1993 Lexus Es 300

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Check and see if your model have the hydrolic (not electric) coolant fan.If so pay attention to see if the fan is running very slow and never changes speed.If this is the case,check to make sure that the plug to the sensor that is located on back of the powersteering pump has not come loose.They are know to work there way off.If it is not unplugged than the sensor on back of the powersteering pump needs to be replaced.This will allow the proper flow of fluid and pressure to properly operate your fan.This may sound strange,but i buy es300's with this problem often because people are afraid of them and think there is a major problem.This will take only 5 minutes or less of your time.

Posted on Oct 11, 2009

  • 1 more comment 
  • saoportland Jun 06, 2011

    Does a 1995 es300 also have this plug? I know the 92-93 es's did, but the 94 up have a little difference to them.

  • Steven Allen Sr.
    Steven Allen Sr. May 28, 2012

    i got1 contact me at steveal83@live.com

  • Pounamu Ferguson Nov 09, 2012

    This is the best find I've had in eons!! Thanks for the advice, I just returned to my mechanic (who couldn't find anything wrong and I paid for new hose, rad caps, etc) and read your post to him. Guess what - he said he hadn't heard of that before, suggested I contact an auto electrician. I did, he located the plug to the sensor, found it wasn't connected, put it back on and charged me $20. What a bargain, it's working a treat. So thanks again for the tip.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

With the engine running at operating tempature the electric cooling fans should be running. if they are not this means that one or more of the sensors could be faulty. either the coolant temp sensor on the intake manifold or the one on the fan assembly. also there could be a bad relay in the power distribution box under the hood. this would be a good place to start. with the engine running at tempature the fan should be running if it s not then go to the power distribution box and switch the relay of the a/c clutch with the radiator fan relay if the fans kick on then replace the fan relay if the fans do not kick on you have either a faulty temp sensor on the fan or the fan itself is bad. if the fan is running properly then it's a mechanical problem mostlikely your water pump is not circul;ating the coolant. to check this remove the radiator cap( remember if the vehicle is hot do not remove the cap it's under pressure ) touch the upper radiator hose if it is hot then the thermostat is open and it is ok if it is cold then replace the thermostat.if the radiator cap is removed and the vehicle is running you should be able to see coolant movement in the radiator if there is not replace the water pump

Posted on Apr 21, 2009

  • lesliet777 Aug 17, 2010

    The ES300 in 93 does not have an electric fan, they are hydraulic. (unless there's a variant I've never seen) Also, the thermostat is in a housing connected to the lower hose, hot water flows out the lower hose from the thermostat and into the radiator, so you need to check if the lower hose is hot or just lukewarm when its overheating. You can test the hydraulic fan control module by either unplugging the temp sensor (just above the t-stat, lower belt side of the engine) or grounding pin op1 of the underhood diagnostic connector. It will normally run slowly until the engine is too hot, then kick into high speed. Blown headgaskets are pretty common on these, so getting a block test (blue chemical tester, or a four gas ) is a great idea.
    -LT, ase master 20 years

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Double check the radiator cap and water outlet cap make surre that they are not worn out or broken and if they are replace them and fill up the complete system with 50\50 fluid from discount auto parts
i have a es300 would overheat after driving for 15 minutes and all the fluid would gush out of the over flow tank but now i drive and the highway and back without a problem it is a very simple problem that caused me a lot of headache sshould be a 20 dollar fix
let me know what happens

Posted on Aug 13, 2009

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

GARYca
  • 672 Answers

SOURCE: LEXUS es300 oil light stays on oil level full

Check oil level sensor, replace if necessary. also, does your engine knock or make a tapping sound?

Posted on Mar 29, 2010

  • 1 Answer

SOURCE: how is a tune up for a 93 lexus es300

replace spark plugs, spark plug wires, cap, ignition rotor, air filter, oil change, transmission flush, transmission filter&gasket .. That should do it.. It'lI be good if you could check your timing as well.. do this tune up every 15-20 thousand miles and oil changed every 3000 miles, depend on how much you drive it.

Posted on Dec 03, 2009

  • 1 Answer

SOURCE: how to change lexus es300 2002 cabin air filter

I just changed the cabin filter of my ES300. I found the instructions on the manual, under airconditioning and audio. It's pretty easy to do. I bought the filter from Kragen's for $21.95.

Posted on Mar 27, 2009

  • 6 Answers

SOURCE: amplifier location 1993 lexus es300

My Son has a 95 es300, the amp for it is located under the front passenger seat. The easiest way to access it is to remove the 4 bolts holding the seat down, and remove the seat. Takes about 5 minutes

Posted on Jul 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Lexus ES300 keeps overheating. I was told by a mechanic that I need to locate and replace the thermostat. I've purchased a new thermostat. Can anyone help me locate the existing thermostat?


1993 Lexus ES300 3.0L MFI DOHC 6cylThe Thermostat is located:Under hood, passenger side, upper engine area, engine end of upper radiator hose, mounted in coolant outlet housing

Oct 31, 2012 | Cars & Trucks

1 Answer

Owners manual


You can check on Ebay for a used book.

Aug 19, 2012 | 1993 Lexus Es 300

1 Answer

Where is fuse box on 1999 lexus es300


You can check this website, you find there fuse box diagram and description for Lexus ES300


Lexus ES300 1999 fuse box diagram Auto Genius

Lexus ES300 2002 2003 fuse box diagram Auto Genius

Apr 11, 2012 | 2003 Lexus ES 300

1 Answer

Have a 93 Lexus es300 white smoke coming from the exhaust pipe.


White smoke usually indicates water in the oil.
You should pull your oil dipstick and see if you see water bubbles on the stick

Feb 16, 2012 | Lexus ES 300 Cars & Trucks

1 Answer

My 93 lexus es300 doesn't start. i can hear the solenoid making a clacking noise is it a bad connection to the starter or is it a bad starter?


i have a brand new battery in a 1993 lexus es 300 the horn blows but lights will not come on neither will it start ive tried twisting the wires and taping the starter still will not start.

Jan 21, 2011 | 1993 Lexus Es 300

1 Answer

Rear brake shoes


at the back of the drum there is a port hole use a flat screw driver or a brake adjusting tool and sure your drum is tight on the spindle when you adjust

Jul 01, 2009 | 1993 Lexus Es 300

1 Answer

CAR HAS NO POWER IT STARTS RUNS AND DRIVES BUT NO POWER AT ALL IN 93 ES300 LEXUS


i have the same problem its the timing belt hydraulic actuator on mine hope this helps.

Jun 23, 2009 | 1993 Lexus Es 300

1 Answer

I have a water pump leak and would like to know how i can replace it myself.


Below are the proper replacement procedures for your vehicle's water pump. Let me know if you need further assistance.


5c4f7c3.jpg

May 23, 2009 | 1995 Lexus ES 300

Not finding what you are looking for?
Cars & Trucks Logo

5,476 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

905 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...