Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Feb 28, 2018

My mitsubishi galant 96 VR6 wont start,,they have spark on high tension wire,,but i think they don't have fuel come out from fuel injector i check the filter and injector line they have a pressure of fuel, i already sent my ECU to repair but it doesn't work.please help me............

1 Answer

toddgilbert

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Mitsubishi Master 6,360 Answers
  • Posted on Mar 14, 2018
toddgilbert
Mitsubishi Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Sep 07, 2017
Answers
6360
Questions
5
Helped
1524364
Points
27737

I know this website www.reliable-store.com that i get manuals from, and they have all models online that solve all simple/technical problems
like professionals

I also brought for my 1989 BMW, such old model, they had it and it was very good manual. Go ahead, I bet.

5 Related Answers

Anonymous

  • 393 Answers
  • Posted on Dec 09, 2008

SOURCE: 1999 F 250 crank but wont start

look on injector pump make sure there are no loose wires

Ad

Anonymous

  • 2 Answers
  • Posted on Dec 14, 2008

SOURCE: 2002 mitsubishi galant

Has it overheated lately?
My wife overheated our Galant and it just stopped working, it cranks but that's it.
I pulled the sparkplugs and found them wrapped in a gewey jelly like substance. Like an oil/antifreeze combo.
I am going to replace the entire motor for $1000 as taking it to the mechanics to theorize and practice may cost more.

Anonymous

  • 33 Answers
  • Posted on Feb 17, 2009

SOURCE: my 94 300zx tt wont start changed ecu cas and ptu

check timing, see if belt may have slipped out of timing, and need pressure tester to test pressure where the fuel goes into the fuel filter. check for vaccuum leaks.

Anonymous

  • 202 Answers
  • Posted on Apr 17, 2009

SOURCE: 96 ford explorer code p0301 mis fire 1

Sounds like either a bad plug wire, or coil pack. This is about all that would cause the misfire.

jav mora

  • 220 Answers
  • Posted on Jun 18, 2009

SOURCE: Car starts then immediately idles down and shuts off

i have had the same problem at times. my car would start and then shut off. but i found that i needed oil and check my oil and it was a quater low put in some oil and everything went fine i notices that everytime the oil is low the same thing happens also depending on the position of the car being park meaning that if you are in a down hill position or up hill position i will do the same. so you have to accelarate for 1 minute to have the oil go up. i hope this works

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why is no fuel getting to the injectors?

Check the Fuel pump

2003 Mitsubishi Galant Repair and Maintenance - RepairPal

repairpal.com > Cars > Mitsubishi > Galant
Information on the 2003 Mitsubishi Galant, including known problems, recalls, user ...2002 Mitsubishi Galant ... it will crank but not start not getting any spark or fuel what can you suggest. would like . ... The fuel return line fitting at the fuel pump may be restricted, causing excessive fuel pressure in the fuel injection system.
1helpful
1answer

2000 galant turns over but wont start

As with any no start problem, you need to figure out if you are lacking fuel to the injectors, compression, or spark to the plugs to know what to start checking.
0helpful
1answer

For about a week my 2001 galant es v6 would not start right away. After 4 or 5 times it would turn over and stay running after i gave it gas. I went to start it today, it started but didnt want to turn...

YOU NEED A LITTLE TUNE UP.REPLACE FUEL FILTER, REPLACE AIR FILTER,CLEAN FUEL INJECTORS.REPLACE SPARK PLUGS AND WIRES.IF ENGINE STILL SHAKE YOU COULD HAVE FUEL PUMP OR FUEL PRESSURE REGULATOR PROBLEMS.
0helpful
1answer

P0301 01 galant

cylinder one problem, check all components on cylinder one .spark plug, high tension wires ignition coil, coil ground and supply, injector, and check compression
0helpful
1answer

1995 galant died the other day wasn't getting any fuel replaced the fuel pump the works but car still wont start

You need three things to run: spark, fuel, compression (timing). Check for spark simple, check for fuel (crank over engine and pull spark plugs, is fuel on them? ) if not rent noid lights from Autozone or such to check upon injector pulse. If nothing let me know and we'll look further in to it.

Best regards,
Tom
0helpful
2answers

02 Mitsubishi Galant, changed igniton but now wont start

There is no simple answer, there are to many variables. If you have access to a scan tool, pulling the codes should help. Without them its back to old school hunt and peck method. At this point we need to narrow down the problem. You need to test for spark.
  1. Tag and disconnect the spark plug wires from the spark plugs.
  2. Remove the spark plugs and install the spark plug wires to each spark plug.
  3. Ground (do not hold spark plug) the spark plug; check if spark occurs while engine is being cranked.
Crank the engine for no more than 2 seconds at a time to prevent flooding the engine with gasoline.
If you have spark, You will want to make sure you have fuel injector pulse, along with fuel pressure. If you have spark ..simply spray some starting fluid in through the air filter and hold the gas pedal to the floor and crank it over while spraying. If it fires up, you know it is fuel related( fuel pump, regulator, or ECM if no injector pulse) . If you have no spark then look at ignition coil connection and trace through to the distributor( if equipped ). The crank shaft sensor has a tendency to fail on these as well. This should give you a few things to test and check to start you on your way to narrowing it down. If you have no spark then look at ignition coil connection for power and trace through to the distributor( if equipped ). If it is DIS( no distributor). It may be the Crank sensor or the ECU. The crank shaft sensor has a tendency to fail on these as well.
The ECU uses the signal sent from the Crank sensor to trigger the spark and fuel injectors. ( make certain you have checked all fuses)
5helpful
2answers

Hello, I have a 96 mitsubishi galant es that wont start

could be the crank sensor, you need to check spark and fuel delivery, if you have fuel then its got to be the high tension side of things that are wrong, does this model run off a coil pack for the ht, could be that, you said you change the alternator, check connections at the rear of alternator, this could be the supply for the ht etc,good luck.
0helpful
1answer

2001 mitsu galant V6, misfire in #1cylinder

check fuel injectors, fuel pressure regulator, air filter. cat converter, O2 sensor. failure of any of these wastes fuel. air/fuel ratio should be normal.
0helpful
2answers
0helpful
1answer

96 galant won't start

Did you check the timing belt.
Not finding what you are looking for?

53 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...