Question about 1993 Chevrolet Camaro

1 Answer

Gear Jerking in Camaro z28

I have chevy camaro z28 97 model with auto transmission. I have gear jerking during shifting between N, D, R. & during shifting from 1st to 2nd gear in driving. what is the solution?? by the way, I have replaced gear oil, filter, & gasket but prob still, & I have bad engine mounting & bad driveshift mounting & bad lower arms bushing.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

First of all you need to fix the motor mounts drive shaft hangers and the lower control arm bushings and if you still have a transmission problem . it is in the valve body in the transmission you need to bring it to a good transmission shopas this will be a major tranny overhaul

Posted on Apr 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 z28 Chevy camero will not shift correctly after first gear after the transmission filter and gaskets had been replaced, and new transmission fluid.??


When you say after first gear do you mean it shifts
from first to second and then does not shift after that. If that is what you are saying the problem is most likly the 3/4 clutch. The transmission is a 4L60E 4 speed automatic.
The 3/4 clutch is a week point in this transmission.

May 03, 2017 | 1995 Chevrolet Camaro

1 Answer

94 camaro z28 automatic shifte was stiff jerked it to first gear like a idiot now stuck in first starts up in first still got underneath I can change gears w transmission lever but shift cable in park only...


If the car starts in first, it sounds like you have a problem with the lock cable. There should be a cable from steering column to shifter that prevents the shifter from moving out of park.

Remove the center console and examine the cables. Disconnect the one from the steering column and see if that frees up the shifter. If it does, you will need to find out what is jamming the steering column. Check the cable for frays 1st. Then make sure you didn't drop something down the center console, last look at the cable connection behind the ignition key.... when you are poking around the steering column, disconnect the battery and let is sit for a few minutes or you risk the air-bags blowing up in your face.

A long time ago, I melted a gear shift cable when I didn't have a good ground on the engine block. When the car started, the power when through the shifter cable and it must have gone red hot and melted.

Sep 30, 2014 | 1994 Chevrolet Camaro

1 Answer

97 Camaro z28 automatic shifter


It has second gear start. To activate and provide extra traction when pulling out of snow and muddy ground. z28 have positive traction rears.

Jul 27, 2017 | 1997 Chevrolet Camaro

2 Answers

I have a 97 z28 when i get into the throttle hard it feels like something is going to come through the tunnel my question is how many motor and transmission mount are on this?


if the rear gear box mounts have split off the gear box will jump about,,,,get undr your car and lift the rear of the gear box up to see if its very flopy,,,also check your prop shaft,, the bolts could be loos

Nov 28, 2010 | 1997 Chevrolet Camaro

1 Answer

I have a 1996 z28 camaro with auto trany that kicks into gear


check your transmission fluid level. see if it's burned. you can try changing transmission fluid, but only half at a time. If you change all your fluid at once, you could blow some seals on older vehicles.

Jan 21, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

Gear jerking


when it jerks does the check engine light come on? If so find a reputable transmission shop and it is a simple fix. Costed me $88

May 01, 2009 | 1993 Chevrolet Camaro

1 Answer

My 1995 chevy camaro z28 will not shift out of first gear.


try cleaning the transmission screen...this will help it shift

Sep 05, 2008 | 1995 Chevrolet Camaro

1 Answer

1996 Z28 camaro


sounds like transmission shift solenoid also make sure ur plugs and wires are good or u can get a similiar prob

Jun 11, 2008 | 2000 Chevrolet Camaro

Not finding what you are looking for?
1993 Chevrolet Camaro Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...