Question about 2001 Dodge Ram 2500 Truck

1 Answer

2003 Dodge Ram 2500 diesel 4x4 wiring diagram

I need a wiring schematic for a 2003 Dodge Ram 2500 Cummins Diesel 4x4. I'm not getting any current from my left turn signal control to the fuse box which controls the left turn signal on my travel trailer. The left turn signals (front & rear) on the truck works just fine. The fuse is fine. I think I just have a bad connection somewhere.

Posted by on

  • Tabitha Hughes Wakefield

    This is going to sound very dumb but for some reason I had a simular issue. I hhad a bulb light comee on, all my exterior lights were fine, I thought, Any way the only bulb I found that was out was the one behind my visor that comes on when you slide the think to see the mirror. I get to the suto store take out thr bulb to fing thr replscement, WE DEICED THAT THE low upper lf bulb need replscing after putting it in 3 or 4 time the other side bulb went out, Well I was about the be done with it and figured it had to be the fuse that I would check later. So I put in the ne bulb behind the visor in and WALLA !!! Both bulbs worked great. Even the 1 other that appeared dim was fully lit. Dont ask me the two sells guys, the man from the parking lot or my friend who was all trying to help, how that happened or why but it just did. Like that bulb completed a curcuit.

    anyway just check your inside bulbs and make sure they are all working also;

  • Anonymous Mar 12, 2014

    Where the fuses boxes are

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

TPIM PROBLEM , MUST HAVE COMPUTER FLASHED AT DEALERSHIP

Posted on Jun 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a wiring diagram for a 1997 Dodge RAM 3500 diesel pickup?


1997 3500 Wiring Diagram - Dodge Diesel - Diesel Truck Resource Forums

www.dieseltruckresource.com/...dodge-ram.../1997-3500-wiring-diagra...
Jan 24, 2011 - Hey guys, I'm working on a 97 3500 that's had the bed removed and replaced with a flatbed. There is the biggest mess under that truck wiring wise and. ... 2007 Ram 3500 A/C compressor wont engage, need wiring diagram ...

Dodge Wiring Diagrams / Schematics - YouTube

? 1:13
https://www.youtube.com/watch?v=UI6_vhCHFYU
Nov 19, 2013 - Uploaded by Robert Nauert
Dodge Wiring Diagrams / Schematics ... Nitro, Power Wagon, Ram 1500, Ram 2500, Ram 3500, Ram 4500 ...

1997 Dodge Cummins - Full color wiring diagrams - 12 Valve ...

forum.mopar1973man.com/.../1638-1997-dodge-cummins-full-color-wi...

Jan 01, 2016 | Dodge Cars & Trucks

1 Answer

Just bought. 5.9 cummins Can`t get it to start without pushing gas pedal slightly. Runs good after warms up. Still have to give it fuel to start.


Numerous Conditions May Cause Engine to Crank But Not ...

repairpal.com > Problems > Dodge > Ram 2500
2006 Dodge Ram Laramie 2500, 5.9i liter Cummins ... I know in the old days the dodges had a way about starting up an engine and that would be where.

White smoke, rough idle at startup - Dodge Cummins Diesel Forum

www.cumminsforum.com > ... > 3rd Gen. Powertrain
Jun 5, 2010 - 9 posts - ‎7 authors I have an 06 Dodge 5.9L that has a light white smoke and rough idle when first ... 2006Ram 2500 QCSB 4x4, 3" Carli coils w/ 1" Daystar spacer, ... Still ran good tho, dispite the exact conditions you describe on Cold Start up.

Oct 20, 2015 | 1995 Dodge Ram 3500

1 Answer

Dodge RAM 2500 4x4 Cummins 5.9l diesel: Starts and idles but no throttle - amber engine warning light has illuminated on the instrument display


Manual states possible (probable) engine control problem and needs to be checked by dealer. The big auto parts stores will scan for free and hopefully can point you in the right direction of what needs to be addressed. If not, get back to us with that code and we'll be glad to further assist you.

Feb 07, 2011 | 1999 Dodge Ram 2500 4WD

1 Answer

I have a 2003 Dodge Ram 2500 4x4 with a cummins diesel that the heating system does not work. It only blows out cold air? I have replaced the thermostat but no improvement. Can you help? CK


I had a 2001 Dodge 3500 with the same issue. In my case, the "air blend door motor" failed. I had it fixed at a Dodge dealership - the motor itself was only about $125 but it cost another $900 for labor - they had to remove the dash & center dash console in order to get to the motor. It did fix the problem though.

Oct 28, 2009 | 2004 Dodge Ram 2500

1 Answer

Dodge 2500 ram diesel no tail lights and my abs


replaced the IPM (the fuse box) it was shorted

Oct 25, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

2004 4x4 ram cummins wobble upon take off and in


my 06 2500 cummins shook like a log wagon until i change the u-joints. 35 dollars and a couple of hours. 

Jun 08, 2009 | 2006 Dodge Ram 1500

1 Answer

Where are the turn signal fuses for 2001 Dodge Ram 2500 Diesel?


If you have trouble in fixing your vehicles, try www.reliable-store com . Very helpful

Feb 28, 2018 | 2001 Dodge Ram 2500 Truck

1 Answer

LEFT TRAILER TURN SIGNAL DOES NOT WORK


I have seen once before that the fuse box was bad on a 2003 Dodge 3500. I had power in and nothing out. We had to replace the box. Not cheap! Hope it is simple like a loose connection though. I think I had to pull the inner fender on the drivers side to access the bottom of the fuse box. Pain in the ****, but...

Feb 25, 2009 | 2004 Dodge Ram 2500

1 Answer

Water pump replacement procedure 2005 2500 dodge with cummins diesel


take off old water pump. clean up area on the motor real good.do this by using a scrapper and cleaning slolvent. when thats all done put hi temp silicon on the block water pump and the put gasket on silicon. let dry for like five minutes. put in on torque bolts to specs.

Aug 22, 2008 | 2005 Dodge Ram 2500 Truck

6 Answers

1997 Dodge Ram 2500 Cummins Turbo Diesel


The cruise control on y 1997 dodge cummins diesel 4x4 suddenly stopped working.I checked the fuses but they are ok.any solutions?

Jul 12, 2008 | 1997 Dodge Ram 2500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

4,444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...