Question about 1990 Chevrolet Camaro

2 Answers

1990 chevy camaro with a rebuilt 350 Tbi

I just bought a 1990 chevy camaro with a rebuilt 350 Tbi engine out of a Blazer now it's flooding cutting out getting to much gas The last owner put the 350 in and removed all the emissions, like the vacume pump exc.. Any Idea's

Thank you
Tim

Posted by on

  • 4 more comments 
  • Tim Terzich
    Tim Terzich Apr 21, 2009

    Thank you. I will give it a try, :-)



    Tim





  • Tim Terzich
    Tim Terzich May 01, 2009

    I found out the gasket on my Tbi is sucking air in. I think there is electonic problem. I disconnected the Air Bag and the blower fan ran better. The dashboard security light is on to.



    Any idea's?



    Thank You

    Tim

  • Tim Terzich
    Tim Terzich May 29, 2009

    Hi guys, I am woundering if the fuel pump is not right for the ACDelco rebuilt 350 tbi engine with two injectors. I'm thinking my Camaro had a MPFI 305 origanally and the Peripheral Type fuel pump in it is giving my tbi 350 to much gas. I hope I don't have to replace the fuel pump to the Rollervane Type fuel pump. where is the fuel relay on a 1990 Camaro RS

  • Tim Terzich
    Tim Terzich Mar 26, 2012

    Okay sounds right. But I was told a long time ago if I put a fuel pressure regulator inline, the return fuel will not be enough and will wreck the fuel pump.

  • christian theriault Oct 11, 2012

    i have the same problem with my 1988 chevy pick up

  • Tim Terzich
    Tim Terzich May 11, 2014

    Mine turned out to be the magnuts on top of the distributor

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 45 Answers

Your multi port set up ran like 30 psi yor throttle body only runs 10

Posted on Dec 09, 2011

  • Tim Terzich
    Tim Terzich Apr 17, 2012

    I am very sorry Ric Honcho, I double checked and the car originally came with 305 TBI engine.

  • Tim Terzich
    Tim Terzich May 11, 2014

    turned out to be the magnuts on top of the distributor

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Fuel pressure isnt right.. need to get a fuel pressure regulator so you can regulate the gas flow..

Posted on Apr 21, 2009

  • 1 more comment 
  • Tim Terzich
    Tim Terzich Mar 26, 2012

    Okay sounds right. But I was told a long time ago if I put a fuel pressure regulator inline, the return fuel will not be enough and will wreck the fuel pump.

  • Tim Terzich
    Tim Terzich Apr 16, 2012

    I always hear a strange noise when the engine is dying the other day I put my finger on the fuel metering assembly and the spring inside the fuel metering assembly is making all that noise. I took it apart but can not find anything wrong.

  • Tim Terzich
    Tim Terzich May 11, 2014

    turned out to be the magnuts on top of the distributor

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine Install


try on line internet look for diagram for a 1983 chevy blazer 350 engine.or go buy dealership see if they have engine diagram.

Jul 10, 2013 | 1983 Chevrolet Blazer

1 Answer

Overheating problems for 1987 chevy K5 Blazer


Is it possible the replacement engine has a water pump that turns the opposite direction from the original ?
The thermostat has to be open to allow flow thru the radiator, have you tried running without a thermostat to check flow ?

Jul 24, 2012 | Chevrolet Blazer Cars & Trucks

4 Answers

90 chevy 4/4 pu tbi 350 floods out


I'm having the same trouble with the flooding after warm start...if it's the temp sensor, would the temp gauge be working? It's in a 1991 Chevy van with an injected 350 carb.

Jul 08, 2010 | 1991 Chevrolet C1500

1 Answer

I have a 1990 Camaro RS with automatic transmission. The guy I bought it from said the engine is a AcDelco rebuilt 350 V8 from a 1989 Blazer. There was a Acdelco plate on the engine. I replaced the...


I would think the starter you need would be the 90 camaro one, and not the 89 blazer, as you still are dealing with a camaro tranny and flex plate. Inspect your ring gear closely when you have the starter off, and make sure the teeth aren't buggered. Let me know what you find. Good luck.

Apr 20, 2010 | 1990 Chevrolet Camaro

1 Answer

I need to find out what colors go to what post onto the starter


most of the time all big hole wires go to the big post whitch would be battery an hot leads.the smaller wire sould go to the s post closer to the block. s stands for start.. GOOD LUCK

May 26, 2009 | 1988 Chevrolet S-10

2 Answers

1987 chevy s-10 2.8 motor. Wont start and gas present on plugs. Getting fire and fuel. TBI injection. New plugs wires cap and rotor. Checked TDC and checked firing order.


Is it flooded? Have you tried holding the accelerator to the floor? You have gas spraying out of the injectors when cranking? Does it even try?

Mar 27, 2009 | 1986 Chevrolet Camaro

1 Answer

Looking for camaro engine for really low price due to my budget..


Where do you live???? I have a neighbor that has a rebuilt 350, on a stand ah hear it run!!!!

Feb 01, 2009 | 1987 Chevrolet Camaro

Not finding what you are looking for?
1990 Chevrolet Camaro Logo

938 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...