Question about Hyundai Motor 1995 Accent

1 Answer

I need to replace my rear mounted brake light on my '95 accent. Unfortunately one of the screws on the panel is completely stripped and I can't get it off with a screw extractor. Should I just take it to the dealer and try to get them to remove it? Are they going to charge me exorbitant amounts of money?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try to drill the screw out. If you take it to the dealer they will charge you alot. You have to use a drill bit that is harder than the screw.

Posted on Apr 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Undo stripped screw on rear light panel


Stripped head or threading on screw itself?

Nov 09, 2013 | Land Rover Cars & Trucks

1 Answer

How to replace rear brake light hyundai getz 2004


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

May 15, 2011 | Hyundai Motor 2004 Accent

1 Answer

Replace rear brake light.


Open rear hatch. You'll see 2 black screws on the brake light assembly. Remove these 2 screws and pull the assembly out. There, you'll see wires attached to a long grey strip which holds the bulbs. There are 2 screws on each side of the top and bottom of this strip. Remove these and this plastic strip will pull straight out with the bulbs attached to it. You now have access to all 3 bulbs to replace with new ones.

Feb 04, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

Do I remove the entire cover or the little door thats atached to this cover on the passenger side? There are 3 brake lights that were recommended to replace. Driver side and passenger side plus the third...


Lamp, Rear Hi-Mount Lamp Assembly
Removal
  1. Disconnect the battery ground cable (14301) .
  1. Raise the liftgate.
  1. Remove the liftgate door trim panel (46404) . Refer to Section 01-05 for the removal procedure.
Trim Panel, Liftgate Door Removal
  1. Disconnect thebattery ground cable (14301) .
  1. On vehicles with a rear window wiper, remove the three rear wiper motor cover screws and remove the rear wiper motor cover.
  1. Pry the liftgate door trim panel (46404) away from the liftgate.
  1. Disconnect the luggage compartment lamp electrical connector.

    n11098a.gif

  1. Remove the liftgate door trim panel
  1. Rotate the rear hi-mount lamp socket counterclockwise and remove it from the rear hi-mount lamp (13A613) .

    k20521a.gif

  1. Remove the two rear hi-mount lamp housing nuts and remove the rear hi-mount lamp lens and housing.

    k20523a.gif

Oct 18, 2010 | 1995 Ford Aspire

1 Answer

How do i change a brake light bulb on 2000 vw jetta?


Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Remove rear luggage compartment side panel trim (left or right).
98971821.gif
  • Remove 3 nuts, arrows, and remove housing.
  • Remove bulb holder.
Installing:
  • Install bulb holder.
  • Insert housing into body opening.
  • Tighten nuts.
  • Install applicable rear luggage compartment side panel trim.
Rear Light Bulb Holder Removing And Installing:
Removing:
  • Disconnect electrical connector.
  • Depress retainers, arrows, and remove bulb holder.
98971817.gif Installing:
  • Install in reverse order of removal.
And the Center Mounted Brake Lamp.
High mount Brake Light Removing And Installing:
The high mount brake light is installed in the rear shelf.
98971288.gif Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Disconnect electrical connector from high mount brake light.
  • Remove rear shelf
  • Un-clip high-mount brake light from rear shelf, arrows.
  • Install in reverse order of removal.
NOTE: The bulb holder base plate contains soldered- in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction, replace complete bulb holder.
Additional

Mar 13, 2010 | 2000 Volkswagen Beetle

1 Answer

Rear brake lights will not turn off when car is turned off


Hi:
You most likely need a new brake switch. It is mounted up near the top of the arm that the brake pedal mounts to...It isn't too hard to change,and costs approx $20

Nov 29, 2009 | 2001 Hyundai Accent

1 Answer

How do you replace the brake light on the rear spoiler on a 2001 Hyundai Accent?


This is the Spoiler Dude. The spoiler light is attached with screws to the spoiler. You must remove the screws and then the spoiler light will come away from the spoiler. Clip the two wires ( Black & Red ). Attached the new spoiler light ( I can get that for you) with a sleeve. Test the new light with the brake pedal depressed. Screw in the new light and that is it. If you have any questions.
Call Spoiler Dude Paul
719-661-8600
www.spoilerdudepaul@gmail.com

Apr 20, 2009 | 2001 Hyundai Accent

1 Answer

How do you replace the third brake light bulb on a 2004 Hyundai Accent 2dr hatchback?


It's not impossible people! You will however need more than just a screwdriver.
This is for a 2004 Hyundai Accent 3 door (i.e. Hatchback)
Open the rear door to get to the stop light assembly. Directly under (or above now that the door is open and it is upside down) the light case is a small rectangular panel that you can snap out using a flathead screwdriver.
Once removed you should see 4 hex bolts. Remove these (a ratchet is the easiest way to go) and you should be able to pull the light case free of its mount. NOTE: You will notice two pegs or tabs helping to keep the case in place, a bit a wiggling may be needed to free them.
Once it is hanging free, you will need to remove the 6 screws on the bottom holding the case together. With these removed the back should come off and you can get to the bulb.
The replacement bulb I purchased was a Sylvania Long Life number 921. Pull the old bulb out (it may need some force/wiggling but be careful not to break it), and slide the new bulb into place. I would recommend checking that the new bulb is functioning at this point, while everything is still disassembled.
If everything is working... then replace the bottom cover, replace the 6 screws, slide the whole case back into place, replace the 4 bolts, and finally snap the panel cover back into place.
This whole process should take no longer than 20 minutes.
Hope this helps... Cheers!

Mar 24, 2009 | 2000 Hyundai Accent

1 Answer

How do I change the bulb 2004 infiniti high mount bake light?


Unfortunately, these are not very simple. If you have a factory high mount brake light-meaning not one in a spoiler, you have to remove the rear seats, the rear parcel shelf and then the 3rd brake light. the 3rd brake light I believe is an LED setup which get replaced as an assembly which inserts into the housing. If you need further guidance let me know.

Thanks,

Brian

Dec 10, 2008 | 2005 Infiniti G35

1 Answer

Hyandia Accent


not sure which top tail light you mean? do you wish to replace bulb or actual lamp on the rear screen? this is the high level brake light ! OR do you wish to replace bulb in one of the rear tail lamps offside/nearside ? which ever ? the h/level brake light bulb is accessable for bulb from the rear panel on hatch behind lamp bulb is 16 watt capless push in type

Nov 10, 2008 | 2003 Hyundai Accent

Not finding what you are looking for?
Hyundai Motor 1995 Accent Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...