Question about 1999 Ford Crown Victoria

1 Answer

Headrest removal on a 1999 Ford Crown Victoria LX

I can't seem to get the headrests to release and come out. There are no buttons to press.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

If you unscrew the black pieces around the posts, lift them up and pull back gently on the seat material. There are 2 wire clamps around each post. Simply use a flathead screw driver and stretch the clamp to release the headrest.

Posted on Apr 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove the rear headrests on a 2012. Ford C-Max titanium


Pull the headrests up to their maximum extension, press and hold button and pull headrest, if it does not come out, utter a few words of encouragement at it and pull harder

Jun 23, 2016 | Ford CMax Cars & Trucks

2 Answers

How to remove the headrests to put seat covers on for a 1989 crown victoria?


90% of head rests just pull out. the others will have a button where the headrest goes into the seat. If yours doesn't have the button, then push the headrest down and **** it up with some force and it will come out. Just be carefull you don't hit yourself in the face with it. Been there done that

Feb 08, 2011 | 1996 Ford Crown Victoria

1 Answer

How to remove front seat headrest on a 2008 Ford Escape? Have new seat covers and need to be able to remove them to install.


There is a Pin hole on one side of the headrest in the plastic base. You have someone put a small Allen wrench in the hole till it presses against the metal spring and also on the release on the other side, then pull the headrest out. You will have to press on the spring to put the head rest back in also.

Dec 27, 2010 | 2008 Ford Escape

1 Answer

How do I remove the headrest from a 2006 ford focus?


Most times there is a small hole on the plastic piece that the heads go in and out of. This hole is big enough to put a small nail or paperclip in. Doing so and pressing firmly, will trigger the release switch. You might have to press in on that, and the regular button (for going up and down) at the same time, and have a 2nd person pull up on the headrest.

Here is a link to some basic install instructions, which covers headrest removal with pictures:

http://www.seatcoversunlimited.com/Insta...

Good Luck please rate 4 thumbs up and please leave a testimonial

Oct 30, 2010 | 2006 Ford Focus

1 Answer

Headrest removal on a 1999 Ford Crown Victoria LX


You should be able to push and hold the button that lets you adjust it up and down and then just pull it up.

Oct 10, 2010 | 1999 Ford Crown Victoria

1 Answer

How do I remove the right front seat headrest in a 2001 Ford Crown Vic?


Lift the headrest up, unscrew the two plastic covers from the post and then pull the headrest up.

Aug 08, 2010 | 2001 Ford Crown Victoria

1 Answer

How do I remove the head rests on my 1999 Ford Crown Victoria. They are bucket seats. ex cop car


Pull up on the headrest to the top ,there should be two screw's holding the collare of the head rest in place.

Mar 07, 2010 | 1999 Ford Crown Victoria

1 Answer

Hi I was wondering how to remove the headrests on a pontiac montana


At the top of the seat where the headrest posts go into the seat, there may be buttons that you have to press to release the headrest. On some models, it'll require you to insert a paperclip into a hole on the plastic to release the headrest.

Nov 18, 2009 | 2002 Pontiac Montana

3 Answers

Removal of headrest on 2005 Ford F150.


The headrest has on obvious button to adjust the height and another button kinda hidden to remove the headrest. The black plastic ring at the base where the metal poles insert into the seat is where the two buttons. You probably noticed the obvious on that sticks out of the side of one of the rings. The other plastic ring contains a similar button that is not noticeable due to it being flush with the side of the plastic ring. Adjust the headrest to its highest position, then locate the "hidden" button on the other plastic ring and depress it while lifting on the headrest and it should come out.

Dec 11, 2008 | 2005 Ford F-150

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

Related Topics:

589 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...