Question about 1999 Isuzu Rodeo

1 Answer

1999 RODEO PROBLEM WITH FLYWHEEL

MY DAUGHTERS RODEO IS A 99 V-6 4-WHEELDRIVE. LIKE I SAID WE HAVE REPLACED THE FLYWHEEL 3 TIMES, AND NOW IT IS BROKE AGAIN. I CALLED THE ISUZU TECH SUPPORT TO ASK ABOUT RECALLS ON FLYWHEEL NONE POSTED. TWO ON ABS (BRAKES) THOUGH. ANY HELP ON WHAT TO CHECK OR DO NEXT I WOULD BE REALLY GRATEFUL

Posted by on

  • 2 more comments 
  • lana747 Apr 21, 2009

    MPetro 302 so sorry about caps, new to this Really didnt know what all caps meant, just easier to read

  • medley_r May 11, 2010

    auto or manual trans

  • Mike  Petrowsky
    Mike Petrowsky May 11, 2010

    It kinda makes it harder to read. Also on the net its considered rude as all caps is related to as Shouting. I would have the torque converter checked for balance and maybe even the shaft.



  • Mike  Petrowsky
    Mike Petrowsky May 11, 2010

    Is your caps lock key stuck on your keyboard?
    You might want to get that looked at also.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Replace the dial pins in the back of the engine block. This aligns the transmission to the engine. It has fixed a lot of them. Sometimes they will come out when the two are separated and the mechanics put them back together without them. This will result in a cracked flywheel.

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a isuzu rodeo 1999, and I need to get the bolts for the flywheel but I don't know the metric of them.


Diego del Rabal,

You don't want to take a 10, 11 & 12mm sockets with you under the vehicle... I'm not sure you are saying you lost your original bolts... ??

There is a lot more technical specifications to those BOLTS than their size, hardness, length... (etc.).

HARDWARE STORE won't cut it!!

Go to the dealer and ask for more...

and don't forget the throw-out & pilot while you are there!!

More Information for SACHS NFW4001

1999 ISUZU RODEO 3 2L V6 Flywheel RockAuto

1999 ISUZU RODEO 3 2L V6 Clutch Pressure Plate RockAuto

More Information for SACHS SC70107

Aug 11, 2016 | Isuzu Cars & Trucks

1 Answer

99 cadillac deville flywheel replacement


1979 Cadillac Coupe 425 engine running; flywheel knocking

? 1:16
https://www.youtube.com/watch?v=UTDBmkKyBCY
Sep 30, 2011 - Uploaded by Edgar H
1979 Cadillac Coupe 425 engine running; flywheel knocking ...Change Transmission Fluid pan removal Cadillac Seville part1 - Duration: .

Exclamation Re: Found a 94 STS for $800, needs flywheel ...

www.cadillacforums.com/.../cadillac-seville-cadillac.../65815-found-94-s...

Feb 16, 2006 - 15 posts - ‎9 authors
Cadillac Seville / Cadillac Eldorado Forum Discussion, Found a 94 STS for $800, needs .... If it is somehow just the flywheel, your repair cost would be the labor involved in dropping ... Automobile(s): 1999 STS - diamond white. Re: flywheel 99 sts
14 posts
Apr 7, 2013
Re: need to replace flywheel
3 posts
Dec 3, 2011
Re: Location of transaxle to engine bolts on 1998 ...
15 posts
Nov 13, 2011
Re: How to lock flywheel without $150 tool?
7 posts
May 21, 2009
More results from www.cadillacforums.com

Jan 11, 2016 | Cadillac Cars & Trucks

1 Answer

Como poner banda del tiempo a una isuzu 99


COMO PONER BANDA DE TIEMPO DE UNA ISUZU RODEO 99

May 28, 2012 | 1999 Isuzu Rodeo

1 Answer

99 Cavalier seems to be kicking back on the starter and busted the gears. Replaced starter several times still does this.


you may have damaged the flywheel take starter out and inspect it u must go a full turn using a socket on the end ov damper pulley or a pry bar at starter opening slow proses but proble has damage 2 flywheel will need 2 replace if damaged or will just eat up more starter drives good luck gordon

Apr 07, 2011 | 1999 Chevrolet Cavalier

1 Answer

Flywheel/flexplate broke on 1998 Isuzu Rodeo, need diagram.


You will have to remove transmission. to get to the bolts.

Feb 03, 2010 | 1998 Isuzu Rodeo

2 Answers

Holden rodeo 99 3.2v6 4l30e code 82 and going into limp mode


the tcm may be faulty or has a loose ground, try swaping in another if you can get one borrowed or a cheap used one from a salvage unit

Oct 30, 2009 | 1999 Isuzu Rodeo

1 Answer

My 1999 isuzu rodeo wont start.


check all your connections to your alternator,starter and your battery But you you are hearing the starter "click" but not engage..try tapping on the starter with a hammer if it is easy to get to..this some and sometimes does work..but your starter solenoid can be bad..the starter can be bad..igntion module a number of possibilities..goto your local parts store or public library and purchase a repair manual or check one out at the library

Jul 30, 2009 | 1998 Isuzu Rodeo

1 Answer

99 Rodeo 3.2 V6 fuel injected .


sounds like u may need a new fuel pump, the problem is the system doesn't hold fuel pressure after shut down, the check valve that does this is part of the fuel pump in the gas tank.

Jun 10, 2009 | 1999 Isuzu Rodeo

1 Answer

MY DAUGHTER HAS A 1999 RODEO, WE HAVE PUT 3 FLYWHEELS IN IT. THIS LAST ONE THE MECHANIC PUT IN THIS BOLT(PIN) WHICH HE THOUGHT WOULD FIX IT BUT IT LASTED APPROX. 6-7 DAYS AND NOW IS NOT RUNNING AGAIN. ANY...


Somebody has to put a dial gauge on crankshaft, before installing flywheel, and on flywheel after installation, as well as check for proper starter alignment . Get a customer service number from manual, or google & give Isuzu a call to and see if they can shed any light on it.

Apr 21, 2009 | 1999 Isuzu Rodeo

Not finding what you are looking for?
1999 Isuzu Rodeo Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...