Question about Chevrolet Venture

1 Answer

Need to remove the window motor on the driver side!!

How to take off the driver side window motor?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

You have to take the inner door cover off. There will be screws in the arm rest on the door. As well there should be a number of clips, that you can just pry or pull off that are holding it in place. From there you will be able to see it. Just take your time, have a good look at it and you should be fine. Depending on the car / truck you may have to take off your side mirror, But that is easy as well pop the inner cover off and there will be 3 small nuts there usually 7mm.

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing window motor


remove the door panel screws. there are 2. then remove the panel by pulling it straight back. start at 1 corner and work your way around. once loose, slide it off the door handle and unplug the window and door lock plugs and remove the panel. Pull the plastic back that is attached with a black urathine sealent from the lower left side and you will see the window moter. Unplug the motor. remove the motor spreding the 3 plastic clips apart and pull the motor straight back.

Feb 07, 2013 | 2000 Chevrolet Venture

2 Answers

How do i change the drivers side window motor an an 05 kia sedona


You have to remove the inner door panel to
access the window regulator

You remove the regulator & then the motor from it

You Tube Video will provide a visual of several
similar window motor replacement jobs

Go there-- enter your car,question ,details,etc--- then move
around the site to watch various things

Dec 09, 2012 | 2005 Kia Sedona

1 Answer

Driver side window stopped working


most of the time driver side windows switch be the first switch to wear out.try removing window switch work switch while moving the wires see if window try to go up, if yes, window switch broken.if switch not broken check see if power going to window motor when you work the switch you need a test light or digital volt meter to check to see if power going to power window motor.if power going to power window motor, either window binding or power window motor faulty. make sure driver side window master switch not locked out.if no make sure all the other power windows work if not you have blowed fuse.

Nov 26, 2012 | Hyundai XG350 Cars & Trucks

1 Answer

The window on the driver's side will not go up or down and will not stay up.


Need to check power to switch - then to window motor -- to do this you have to remove drivers door panel and use and test light with the ignition switch in the on postion. With test light connected to window motor, press switch up or down , if light comes on and motor does not - replace motor - if no power at motor replace switch..

Dec 02, 2009 | 2002 Dodge Durango

3 Answers

The drivers side window stoped working on my 2004 silverado the passenger side works fine


Try the fuse. The switch may be faulty so check by removing the inner door panel and connecting a 12v battery via two wires to the motor that winds the window up and down. If it goes up and down it's probably the switch which may just need a clean on the terminals.

Nov 01, 2009 | 2002 Chevrolet Silverado 2500HD

1 Answer

Need to remove and replace the driver side door panel


Could be a bad switch, bad window motor, or clutch in window motor, ccould also be that the window itself jumped track.

Jun 04, 2009 | 2000 Buick LeSabre

1 Answer

Remove drivers side window motor


remove the door trim from the inside of the door, now remove the door plastic weather protector which should expose the window glass and also the electric motor and winder mechanism.
There will be a plastic wire connector inside the door which will have to be disconnected to remove the electric motor etc.
Hope this helps

May 19, 2009 | 1994 Pontiac Grand Am

1 Answer

Drivers Side Rear Window Electric Motor Removal


The local dealer was very helpful in figuring this problem out. There is a clip in the ball part of the arm. When removed, the arm releases very easily.

Thank you anyway
Rob

Nov 09, 2008 | 1998 Dodge Caravan

3 Answers

97 cadillac deville power window motor replacement drivers side


The motor sit on a gear stem you will have to wiggle it a little to get it off the magnet inside is holding it to the window frame just use a little pressure to remove.

Jul 16, 2008 | 1997 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...