Question about 1999 Isuzu Rodeo

1 Answer

MY DAUGHTER HAS A 1999 RODEO, WE HAVE PUT 3 FLYWHEELS IN IT. THIS LAST ONE THE MECHANIC PUT IN THIS BOLT(PIN) WHICH HE THOUGHT WOULD FIX IT BUT IT LASTED APPROX. 6-7 DAYS AND NOW IS NOT RUNNING AGAIN. ANY SUGGESTIONS AND HELP WOULD BE REALLY APPRECIATED.

Posted by on

  • 3 more comments 
  • lana747 Apr 21, 2009

    my rodeo

  • lana747 Apr 21, 2009

    MY DAUGHTERS RODEO IS A 1999 V-6 4-WHEEL DRIVE

  • lana747 Apr 21, 2009

    Thanks alot I will call Isuzu service center.

  • Mike Butler
    Mike Butler May 11, 2010

    Sorry, before I assume, ..... automatic?

  • Mike Butler
    Mike Butler May 11, 2010

    Engine, 2WD or 4 WD?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 6,674 Answers

Somebody has to put a dial gauge on crankshaft, before installing flywheel, and on flywheel after installation, as well as check for proper starter alignment . Get a customer service number from manual, or google & give Isuzu a call to and see if they can shed any light on it.

Posted on Apr 21, 2009

  • Mike Butler
    Mike Butler Apr 21, 2009

    While your at it, see if their tech dept, can give you minimum thickness of flywheel also, if not marked on it already. If you don't mind me asking, where did they all break, same place, different?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rack and pinion bolt, cant to to the last bolt


im looking careful, i cant see it , why?

login in to here and read.
http://www.eautorepair.net/Marketing/Default.asp

read front steering chapter, remove rack.

Dec 22, 2015 | 1999 Isuzu Rodeo LS

1 Answer

My 1999 rodeo isuzu rebs up loud (dleing up) and jerks when stopping . Idling up high when starting is it my idle air control system?


i changed mine took to 3 shops last one said computer i would take pos cable for 30 sec turn on to acc and tap post 3 times if it helps

Jun 27, 2014 | 1999 Isuzu Rodeo

1 Answer

I'm changing my tire on my 1999 Isuzu rodeo and one lug bolt is different than the others how do I take it off


The bolt needs to be pressed off the hub, using a hydraulic press. Your post doesn't state whether this is a front or rear wheel, but either way, it is a bigger job, with rear wheels requiring removal of the axle. Best to get a mechanic.

Mar 24, 2014 | Cars & Trucks

1 Answer

HOW DO YOU TELL IF MY CHEVY 350 NEEDS A METRIC STARTER


There are two different size flywheels (starter ring gears) on these engines. It sounds like you have the flywheel with the higher number of teeth. Find a good auto parts store to get the right starter for your truck.

Nov 25, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

I have a lincoln ls 2001 that about a year ago the AC stopped cooling. I brought it into my mechanic shop and they added some freion. After a couple of weeks it was not cooling again. We brought it in...


If it blows hot air and sometimes it is cool, sounds like the heater control valve. I just replaced mine it cost 135.00 for the part and I changed it myself easy. Mine was just inside under the hood on the left side, there is 3 hoses going to it and 1 electrical plug. If yours is there also you will want to take the big hose off the one side so you have room to get to the control valve, then just take the hoses off, unplug it and there is 1 bolt holding it on and just reverse to re-install. Also mine has a cap on the front of the motor on top you can un screw and add antifreeze so there is no air pockets in you lines and also add to the resevoir. Make sure the motor is cool when you do this. this is very simple, i'm not a mechanic and I thought it was simple

Apr 16, 2011 | 2001 Lincoln LS

1 Answer

It's getting harder to shift gears for my 1998 isuzu rodeo. All gears 1 2 3 4 5 and reverse .What can i do to fix it? The fluid looks dark and dirty in the place that you put fluid in . I have tried to add...


problem is caused by shifter linkage bushings swelling causing joint to become tight and siezedto fixbuy linkage bushings and pins dissasemble pry old bushings clean sand journals of rust install new bushings use grease replce the pin/bolt check to see if the joints move freely

plz leave me a comment if you need more info reply

Jan 19, 2011 | 1998 Isuzu Rodeo

1 Answer

1999 dodge intrepid es.just bought, previous owner had rebuilt engine puta few months ago. ABS light came on when we test drove. Took car to neighbor mechanic and he said we have to flash the system. My...


to save monies I would tell my daughter to go to an auto parts store and let them scan the code, then once the problem is found someone there may be able to put the part on for her or fix whatever problem there may be. Hope this helped Tim

Sep 23, 2010 | 1999 Dodge Intrepid

2 Answers

Took a bolt out of top of gearbox thinking it was


The trans may need to be diassembled to fix. Manual transmissions dont have filters.

Jul 24, 2010 | 1999 Isuzu Rodeo

1 Answer

Fuel will not pump to engine


FUEL FILTER IS PLUGGED UP

Sep 07, 2008 | 1999 Chrysler Cirrus

Not finding what you are looking for?
1999 Isuzu Rodeo Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...