Question about 1994 Jeep Grand Cherokee

1 Answer

It will not even turn over, has power to starter, but no power to ignition fuse next to battery, thought maybe automatic shutdown fuse, but dont know

My jeep will not even turn over, has power to starter, but no power to ignition fuse, has new computer, thought maybe it was the automatic shutdown fuse??? need help

Posted by on

  • modelo Apr 25, 2009

    my jeep turns over, but ignition coil has no power i already changed the distributer cap and rotor and still will not turn on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Take a 1/2 drive socket set and put it on the lowest pulley or crank pulley and try turning the engine over by hand to make sure you have not sized the engine.

Posted on Apr 24, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers


the reason your engine light is on, is because there is a malfunction code stored (maybe more than one code) In order to find any solutions, you need to
have you computer scanned with a scan tool, if you don't have one, take the vehicle to any Auto Zone, they'll scan it for free. Write down the codes and you can google each one & find the problem. Leaving the engine light on and not addressing the problem is not a good thing to do. You can cause more damage when you ignore the engine light. Next time you post, post the year,make, model, & engine size, it will make it easier for someone else to diagnose.

Jan 06, 2015 | Cars & Trucks

3 Answers

Truck turns over and starts when I connect battery???? No key is even in the ignition.

Maybe the ignition is bad- or your starter solenoid stuck in engaged position?

Mar 29, 2013 | 2000 Ford Ranger SuperCab

1 Answer

Engine will not turn over

engine will not turn over.first check battery volts, should be 12.6 volts. if not battery is weak or dead make sure battery cables tight and clean them if you see a lot of corrossion use baking soda and water neutralize corrossion remove battery cables clean them with wire brush also clean battery post terminal with wire brush also wear safety glasses protect your eyes now.try charging and jump start vechicle see if battery good or starter at fault bench test starter and starter solenoid if starter dont work problem in the starter.if starter have blown starter fuse bad starter relay if dash lights dont light up when you turn on the ignition switch and battery has 12.6 volts.check ignition fuse if fuse is good dash still dont light up,you could have faulty ignition switch.if all is good you could have bad clutch safety switch for manual transmission or faulty neutral switch for automatic transmission.if you have the late model cars from 1996 to 2012 has the theft security system which will cause car not to start and try turning engine over with a large wrench to make sure engine not locked up.

Jan 06, 2012 | 2005 Chevrolet Colorado

2 Answers

My 1998 Honda Civic will not turn over. The battery is good but when I try to start it I hear no sound. What could be the problem?

If you turn the key and you don't even hear a click, first I would check to see if you move the shifter from park through the PRNDL and back (assuming it is an automatic). If that solves the problem, it is a bad or misaligned neutral safety switch (as far as I know, it is not common on Honda's, but it is a quick test). Then, I would check the ignition switch and the main relay. The starter could be the issue, but usually they still click when they go bad. I believe that that generation of Honda Civic had some issues with the ignition switch. I have been told that the main relays of the 92-95 had problems that may have carried over to a limited amount of the next generation.

Aug 19, 2011 | 1998 Honda Civic

1 Answer

Doesn't start- Thought starter was bad replaced and still nothing -won't turn over?Battery Good Checked all fuses and starter that was replaced is good! Turn ignition key and nothing? Selinoid not even...

The ignition switch attached to the column is probally bad, check the small wire to the sloenoid for battery when the key is turned to the start postion, if no battery, your not getting power from the ignition switch to the starter solenoid.

Mar 13, 2010 | 1991 Cadillac DeVille

1 Answer

My 98 jeep grand cherokee wont start. It doesnt even click or turn over. battery is fine, headlights, dome lights, all go on. Radio doesnt work with ignition on. I checked ALL the fuses, I replaced the...

fuse 8 40a supplies power to starter relay and ignition switch, to close the starter solenoid and engage the starter which draws directly from the battery. check to see that the starter relay is closing, if not ensure that the park neutral switch is not faulty (open circuit), it provides path to close relay (ground side) on the 85 - 86 terminals. if the starter relay does not close the starter will not run. if you have a spare relay swap out the relay for a quick fix attempt. hope this helps

Jan 28, 2010 | 1998 Jeep Cherokee

2 Answers

After changing the starter and alternator and installed a new ignition switch my 1997 Nissan p/u started up fine. Drove it around town, stopped, turned off the engine and it started again right away. Drove...

Check and make sure you are getting power to the ignition switch and to the stator wire on the starter. Turn the key on and and measure the volts going to the starter on both wires. You should a atleast 12 volts going to the stator wire and to the main wire from the battery. If you are not getting power there it could be a fuseable link in the power wire from the ignition. I noticed that you replaced the ignition switch make sure the rod from the key switch has not come out of the switch.

Sep 16, 2009 | 1997 Nissan Pickup

2 Answers

Dead battery on tahoe 2005 - now no power to ignition

provided you disconnected the battery before you charged it, its probably just a new battery you need, but if you did not diconnect it you have probably done damage to the starter motor and maybe the alternator and god knows what else

Jun 13, 2009 | 2004 Chevrolet Tahoe

1 Answer

Sonata electrical starter problem


Apr 10, 2009 | Hyundai Motor 2004 Sonata

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides