Question about Dodge Ram 1500

2 Answers

Remove tail light assembly

How to remove tail light from 2003 dodge ram. I took the screws out, but feels like there is a clip or something still holding it in. I don't want to break it. please help me get it off so I can replace a turn signal bulb.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

There are plastic clips on it just take your time and they will come out

Posted on Apr 21, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i take off a taillight cover on a 1998 dodge intripid

Posted on Jan 16, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you remove the rear tail light lens on the 2001 Dodge Ram 1500

there are 2 screws on the outside of the lense assembly and when you open the tailgate and look there are 2 screws on the inside of the assembly that you remove to pull out the tailight assembly.

Sep 18, 2011 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2001 Ram 1500 Truck 2WD: how do you remove a tail light from a 2002 dodge r...

There are for Philip screws holding your tail light cover onto your dodge. Step 1: Just remove those screws and pull the cover off. Step 2: Remove the light bracket out of the cover and replace with a 1057 bulb.

May 18, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

How do you remove the tail light on a 2006 dodge ram. I removed the two screws by the tail gate but I'm afraid of pulling too hard to take it off the truck. It fells as if there is another screw on the...

Theres a couple plastic push pin type retainers on the opposite side
of the fastners and yes it can feel like its going to break something pulling them out. I use a plastic trim type tool to pry it out in order not to damage the paint/tail lamp assembly.

May 09, 2010 | 2006 Dodge Ram 3500 Truck

1 Answer

How does the tail light assembly come out after you remove the 2 screws on the tail gate side?

assembly or just the light cover?

The light cover should come off once the two screws are off. The assembly it self is fastened behind it. You will need to get on the ground -[ on a rubber mat or blanket] and look up under the fenderwell. There you will see the way to remove the light assembly by removing the bolts.

Jan 28, 2010 | 2006 Dodge Ram 1500

1 Answer

Cannot get the tail light lense off to change ram 2500

Drop tailgate and look for screws holding light assembly. If all screws are removed you may have sealant holding the assembly. Gently pry it out of is seat. Behind the assembly are the sockets that require a 1/4 turn to remove. Then change bulbs as required. Let me know if this helps. Moe

May 02, 2009 | Dodge Ram Pickup 2500 Cars & Trucks

1 Answer

Need to replace bulb in back up light - do not know how to remove assembly.

yes there are two slide clips in the fender side to keep that side in place

Apr 23, 2009 | 2004 Dodge Dakota

1 Answer

Tail light out on drivers side of 2001 Dodge pickup truck 1500

open the tailgate and there are 2 screws that hold the whole assembly in...remove the assembly and they are accessed from the back

Mar 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2003 Honda Odyssey Brake light replacement

open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).

Jan 22, 2009 | 2003 Honda Odyssey

2 Answers

1996 Dodge Ram 1500 Tail lights

There should be two screws on the inside edge of the assembly, one next to top lense and one next to bottom lense. This removes entire assembly not just cover. these are sealed units.

Oct 09, 2008 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides