Question about 2001 Chevrolet Suburban

1 Answer

Drivers side mirror needs replaced - how do i remove the little panel inside without breaking anything I shouldn't

2001 Suburban needs driver side mirror replaced. How do i remove the little panel inside

Posted by on

  • Anonymous Mar 14, 2014

    On a 2005 E350 super duty mirror replacement, is the sail cover just pryed off from the inside? I don't want to break it.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 209 Answers

Just use a flat screw driver to take it off, it just have a clip inside.

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the panel on the driver's side for the focus?


you may need a door panel removal tool to keep from breaking anything. Have you first tried a telescoping magnet pick-up tool?

Jul 18, 2012 | 2000 Ford Focus

1 Answer

Describe how to replace 2002 driver side mirror


remove the left door panel screws by inside handle and remove the 2 big screws in the arm rest may have some covers on it then with the panel clip tool or screw driver you need to hit the inside top of the panel as you lift up with you hand dont break the panel. carefully remove the door panel clips to release the panel. remove the screws inside the door at the mirror unplug the connector have someone hold the mirror so you dont scratch the car. then pull it loose and reverse the prosess.

Dec 11, 2010 | 2002 Oldsmobile Bravada

1 Answer

How do you take off the power driver's side mirror of a 2001 ford zx2?


should have a little triangular plastic trim cover covering it. Just above the door panel on the inside. remove plastic cover, remove attachment bolts, disconnect the mirror electrical connectors and remove & replace, reassemble & test repair

Jul 04, 2009 | 2003 Ford ZX2

2 Answers

Need to replace Mirror Assembly, 03 suburban


Your going to have to remove the inside door panel to get to the three bolts that hold the out side mirror assembly. Once you have the door panel off you'll see the three bolts that hold the mirror assembly, just un-bolt and un-clip the wire harness to the electric/heated mirror. To install the new mirror assembly, just do everything in reveres. Go to Auto Zone and by extra door panel clips, there is a good chance of breaking some of the retainer clips and Auto Zone will have the step by step instructions to replacing the mirror assembly and the removal to the door panel. Good luck and keep me posted. Be glad to help.

Jun 22, 2009 | 2001 Chevrolet Suburban

2 Answers

Drivers side mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 31, 2009 | 2001 Cadillac Sts

2 Answers

2001 camry replacing driver side mirror


Pull off the triangular trim panel that is right behind the mirror. It is held on by 2 clips. This will allow you to see all three 10 mm bolts to remove the mirror.

Mar 22, 2009 | 2001 Toyota Camry

1 Answer

HOW DO I REPLACE THE DRIVER SIDE POWER MIRROR ON AN 98 F-150?


Remove the sail panel,the little panel on inside of door at the mirror.
Remove the window regulator switch plate, pry up on the front of it with a small pick or screw driver. Disconnect the electrical connectors.
Remove the top door trim panel screw that is behind the sail panel you removed.
Remove door trim panel screw at window regulator switch plate opening.
Remove door trim panel screw in the courtesy lamp housing. Remove the courtesy lamp lens.Remove the screw.
Remove the inside door handle trim cover.
Remove the bolt.
Remove the inside door handle.
Lift upward to remove the front door trim panel.
Remove the courtesy lamp.
Turn the courtesy lamp bulb socket one quarter turn and remove.
Disconnect the power mirror electrical connector.
Remove the three outside rear view mirror nuts.
Remove the mirror.

Jan 31, 2009 | 1997 Ford Expedition

1 Answer

Need to replace driver side mirror on 2005 Durango Limited Editio


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jan 22, 2009 | 2005 Dodge Durango

1 Answer

Replacing a drivers side mirror


There is a panel on the inside of the door where the mirror is.
That has to come off.
In some cases the door panel has to come off also.
Under the mirror panel there are nuts that hold the mirror on. Remove the nuts unplug the harness and install the new one.

Oct 07, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Chevrolet Suburban Logo

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...