Question about 2000 Chevrolet Silverado 1500

1 Answer

Over heating 2000 chevy silverado 1500

One of the heater hoses that connects to the fire wall has broken off. The nipple that connects the hose to the heating coil is the part that broke off. can that nipple be replaced?

Posted by on

  • Anonymous Mar 22, 2014

    replace heater hose coupling

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

YES IT CAN BE REPLACED THE NIPPLES ARE AVALIABLE AT THE DEALER IF YOU DO 1 YOU SHOULD DO THEM BOTH IT DOES TAKE A SPECIAL TOOL TO REMOVE THE NIPPLE IT IS VERY INEXPENSIVE THOUGH

Posted on Apr 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Water leaking at fire wall


It may be the drain for the ac check and see if it has antifreeze in whats leaking if not it is ac drain it supposed to drain when using the ac

Aug 11, 2012 | 2000 Dodge Durango

1 Answer

I have a 2003 chevy silverado 1500 with a coolant leak that comes froma small hose on eh fire wall does any one know why it leaks and how I can repair it. Thank you Thomas


a small hose on the fire wall! Sounds like it could be for the heater core. Depending where it is leaking from, you may be able to replace the hose clamp(if its leaking out the end of the hose), You can buy a few hose clamps from your local autoparts store(I also seen them in a few grocery stores, and of course, at Wal-Mart)
Good luck

Jan 21, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

The nipple that attaches the hose on our 2000 chevy silverado broke do we need to replace the heater core or can just the nipple be replaced


heater inlet & outer hose fittings are available at a parts store or dealer.
? you don't say which end! Here is two common numbers ACdelco 15032062 and 1533862.
Most common is the block item. However a complete hose assembly is available as well.
I would gather you have it fixed by now..If not go to dealer parts department and ask.

Dec 27, 2010 | 2000 Chevrolet Silverado

1 Answer

I have a 1995 chevy silverado 1500. the heater hose bursed. do I have to remove the dash board to repair it?


The heater hose connects to the heater core through the fire wall, under the hood, remove heater hose clamp at fire wall under the hood, remove clamp at other end, install new heater hose, no you don't have to do any thing under the dash.

Sep 09, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Chevy silverado heater not blow out at floorboard position it will work at all other? No other problems like water on floorboard.


With the engine cold look under the hood for a small vacuum hose that feeds the duct controls.Its usually on the pass. side near the A/C box mounted on the fire wall. The vac hose will be coming off the intake manifold.They get broke off or disconnected with the heat.

Nov 07, 2009 | 2001 Chevrolet Silverado 1500

1 Answer

I have a heater core leak on my 2000 chevy silverado V6, is there an easy fix?


You can bypass the heater core, you just wont have heat anymore. On the firewall of the truck, behind the engine, you will see 2 rubber heater hoses that go into the firewall. They attach to the heater core. Disconnect them and get a plastic connector, and connect the 2 hoses together with clamps to hold them down. This will stop coolant from going into the heater core, and no more leak.

Sep 26, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

No heat


Follow the top radiator hose to the motor remove the 2 bolts on the housing and the thermstat is right there. If you still have problems dis connect the 2 small heater hoses at the fire wall and flush with a garden hose your heater core might be plugged

Apr 05, 2009 | 2000 Chevrolet Silverado

3 Answers

Blowing cold air


I had the same problem that I just fix by flushing the heater core out with a hose.   take the two hoses off the fire wall and put the water to it and let flush.  my heater is putting out 150 dg. F  of hot air.   I'm so excited!  i will stay warm now.

Dec 22, 2008 | 1999 Chevrolet Silverado 1500

1 Answer

Fixing a heater core


you can remove the core and solder it yourself or you can have a radiator shop do it unless the rest of the core is not damaged this is an easy fix and the cost will be minimal. please rate this thanks

Sep 28, 2008 | 2000 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...