Question about Dodge Ram 1500

1 Answer

Hub Assy replacement for 2002 Dodge Ram 4x4

Can anyone send me a pic of the whole front end so i can see how to change my hub assy for a 2002 dodge ram 4x4 ( front passanger side)

Posted by on

  • Anonymous Mar 18, 2014

    replace front hubs on 2002 ford falcon

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When you take off the front wheels, you can see behind the hub assembly. there should be 4 or 5 star style bolts that hold the hub in place. you can either break them loose on the truck or in a vise. you will need a star socket,( or it may need a 12 point socket?). there is also a big nut in front of the hub that will take a lot of torque to remove (300-500lbs). the axle is probably going to be rusted also, so you will have to work it out. it is easier to buy a hub, some come in pieces, so you'll have to have them pressed together by a machine shop and them put them on. i am getting ready to do this on on my dually and the axle nut is torqued to 500lbs. be careful and i hope this helps you. andy

Posted on May 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace front right wheel bearing


Front wheel drive?if so which i think it is you need to remove the whole hub assy then use a universal hub seperator to remove the bearing then press a new bearing in. some vehicles such as ford festiva need a special tool to adjust a shim thickness which is imperative. I would sugest you get a 2nd hand hub assy with a good bearing in it & just replace the whole assy :-)

Oct 12, 2012 | 2000 Ford Windstar

1 Answer

I need the torque specs for the 4 hus assy bolts and the 2 caliper bracket bolts on a 2004 dodge 2500 4wd...do you have them?


Caliper Bolts Torque ...... 24 ft. lbs
Hub/Bearing Bolt ........... 122 ft. lbs
Hub/Bearing Nut ............ 180 ft. lbs

Feb 06, 2010 | 2004 Dodge Ram 2500

1 Answer

I think my front Drivers side wheel bearing is going out on my 2004 dodge ram 1500 4x4. It is an ABS system. What should I do to replace this? I wouldnt mind doing it myself if its the cheaper route.


Remove the wheel, the brake caliper with the mounting bracket and pads all together, the brake rotor, and the axle nut. Make sure the axle is free inside the hub splines by pushing it in a bit. I believe this truck has 3 bolts for the hub/bearing assy. They remove from the inboard side of the knuckle, then the hub/bearing assy comes out. It may be corroded in the knuckle, so some force may be required to get it out. To reassemble, reverse the steps, being careful to torque the axle nut to the proper spec. Also pump the brake pedal before you road test to verify the noise is gone.

Jun 27, 2009 | 2004 Dodge Ram 1500

2 Answers

Clicking noise in front end 2001 dodge ram 4x4


the ansew i found is replacing the seal around the joint and from both end removing it and cleaning it out i had rocks in mine from going threw water and mud ita a all day deal but a twenty doller fix axle shaft oil seal is all i had to replace

Apr 05, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Wheel bearing assembly 2004 dodge ram 1500


Hub & bearing should be one assy, is that what your looking at?
3 bolts behind hub, to remove, done?

Apr 04, 2009 | 2004 Dodge Ram 1500

1 Answer

How do you change the wheel bearings in a 2003 Dodge Pickup


Is the truck a 4x4? If it is you will have to replace the bearing assy. which will most likley be diffucult without the right tools.the bearing bolts into place,but the hub assy are known for rusting into place and being very hard to remove.

Mar 29, 2009 | 2004 Dodge Ram 1500

2 Answers

2001 Dodge Dakota loose steering


Hello
Welcome to FixYa
there is a u joint to be replaced on your steering shaft just after the steering shaft
open the hood look down to the steering shaft you will see a small u joint very common to go bad most auto parts stores carry the part
RD

Jan 12, 2009 | 2001 Dodge Dakota

2 Answers

Front bearing


Hub & bearing assy all in one.

Dec 21, 2008 | 2002 Dodge Neon

2 Answers

Front hub bearing removal 2002 dodge ram 1500 4WD 4.7L V8


i just did a 2002 2500 4x4 with a dana straight axle and had no problem getting on the bolts with a 9/16 12 point socket on a 6 inch extension. If you do not use an extension the head of the ratchet will hit the yoke of the axle shaft.

Dec 07, 2008 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

925 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...