Question about Ford Mustang

1 Answer

Engine stalls after start 4 or 5 sec.

2007 mustang gt

Posted by on

  • mrgto428 Apr 20, 2009

    i hope this is problem. drive me crazy

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 79,847 Answers

Have u replaced the ignition switch on the steering column? not the key cylinder but the switch near the base of the column? they come apart and cause this symptom, there was a recall on Mustangs for this switch, call ford and give them your VIN number and they will look up the recall and see if u need it done, in any event the problem is most likely the switch, they come apart at crimp overs of base to body. see photo of switch if you look at picture u will see little tabs that connect and secure metal base to white plastic upper section, this is where they separate.

engine stalls after start 4 or 5 sec. - fa9bad9.jpg

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4.6 Engine valve train in 2008 Ford Mustang Gt


    mages for 4.6 Engine valve train in 2008 Ford Mustang Gt


    More images for 4.6 Engine valve train in 2008 Ford Mustang Gt

    2005-2009 Mustang Cylinder Heads & Valvetrain ...

    www.americanmuscle.com/mustang-valvetrain-0508.html
    They help your motor breathe better and also make sure your Mustang gives top-notch throttle response. ... 2005, 2006, 2007, 2008, 2009 Mustangs; V6, GT, Bullitt, Shelby GT500, ... 2005-2009 Mustang GT Cylinder Heads & Valvetrain Components ... (6).Ford Racing SOHC 3V 4.6L Head Changing Kit (05-10 GT) $76.00.

    Mustang Camshaft Facts & Technical Information ...

    www.americanmuscle.com/camshaft-tech-guide.html

Feb 08, 2016 | Ford Cars & Trucks

3 Answers

1994 mustang gt auto trans keeps stalling while


replace fuel filter and if it continues have pump pressure checked

Sep 09, 2014 | 1994 Ford Mustang

1 Answer

1994 mustang gt auto trans keeps stalling while driving sometimes just when warming it up. Check engine light does not stay on when running. Replaced dist, rotor, cap, coil and had ignition module tested....


check for a fuel flow problem( pump pressure-filter blockage-injector/s) run fault codes ( check for HO2S and O2S sensor operation.. Check cat converter is serviceable Blocking exhaust system

Sep 09, 2014 | 1994 Ford Mustang

2 Answers

Why does a 1995 foed mustang gt just stall and wont restart.


Very late but for anyone else with this problem. I used to have this occur when I drove around for a bit. I'd drive and after 5-20 mins the car would just stall on me. It wouldn't start immediately and sometimes just waiting an hour or 2 and trying again made it start and drivable for a few minutes again. The problem was the ignition coil. I spent over $1400 changing parts to find out it was an $18 fix and took 10 mins to swap out. If the rpms do jump around a lot then yes the stator would be the problem. If it just stalls even while driving, it's the ignition coil. If neither, test the voltage regulator. Hope this help. Happy driving!!

May 25, 2014 | 1995 Ford Mustang GT

1 Answer

2007 mustang will turn over and even start but dies out immediately a if you killed the ignition. What's up with that?


Re;2007 mustang will turn over and even start but dies out immediately a if you killed the ignition. Engine cranks & starts,stalls w/key released to 'run' position ??

Apr 23, 2014 | 2007 Ford Mustang GT California Special...

1 Answer

After washing engine on 2006 mustang gt codes p2104 p2111


That’s the throttle control system when you wet it then the cold must of ruined it take it off an try drying off with a blower or pick a new one up

Dec 19, 2017 | Ford Cars & Trucks

1 Answer

After washing engine on 2006 mustang gt codes p2104 p2111


P2104 is your throttle actuator. Probably wet the sensor. Try drying out with a hair dryer. P2111 is also a throttle code. Overnight the water has condensed and is affecting throttle position sensor.

Oct 25, 2017 | Ford Cars & Trucks

1 Answer

97 ford mustang engine stalls when head lights turned on


did you have an amp test on the altonator? should be running about 14 plus volts with the car running then check it with the lights on if you can

Jun 12, 2012 | 2007 Ford Mustang GT California Special...

4 Answers

83 mustang gt


In a 83 MUSTANG GT the correct answer is BOTH. As a 5.0L and a TURBO CHARGED 4 cyinder were offered.


1983 Mustang GT
  • Engine:
    • 5.0L horsepower increased to 175 HP when 4V carb replaced 2V carb from 1982 (Holley 4180C series).
    • Exhaust system was revised (less restrictive).
    • 4-speed SROD was only transmission available until early December 1982. In December, new 5-speed T5 became standard GT transmission (4-speed remained on option list).
    • Block and crank were revised to accomodate a 1-piece rear main seal in December 1982.
    • The new "Turbo GT" with a turbo charged 4 cylinder engine was available beginning late in the model year - 145 HP and featured the same suspension and other features of the V8 Mustang GT.

Jun 02, 2009 | 1983 Ford Mustang Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5685 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...