Question about 2004 Hyundai Santa Fe

1 Answer

Lower ball joints and leaking boots on my 2004 2.7 AWD santa fe hyundai how much work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

Labor Skill
Level
Mfg.
Warranty
Standard Axle Shaft Replace Front Axle Intermediate Shaft B 0.9 1.3 Notes NOTE To R&R Inner Shaft Bearing and/or Dust Seal, Add B 0.1 0.1 Notes Axle Assembly One Side B 0.6 1.0 Notes NOTE To R&R Outer Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Inner Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Axle Shaft Seals, Add Each B 0.0 0.2 Notes Rear Axle One Side B 1.2 1.7 Notes NOTE To R&R Outer Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Inner Joint and/or Boot, Add Each B 0.0 0.5 Notes

Posted on Apr 20, 2009

  • Ronnie Wilson Apr 20, 2009




    Labor
    Skill
    Level

    Mfg.
    Warranty

    Standard

    Ball Joint

    Replace

    Front Suspension

    Lower Ball Joint

    One Side
    B
    0.8
    1.0
    Notes










    Does Not Include: Wheel Alignment.

    Rear Suspension

    Lower Ball Joint

    One Side
    B
    0.0
    0.6
    Notes

    Both Sides
    B
    0.0
    1.0
    Notes

  • Ronnie Wilson Apr 20, 2009

    Did not show up as seen in Book, Basicly its around 2.0 hours per side for R&R of axel and Ball Joint. Not for the Rooky and Is for the Do it your selfer, Wheel alighnment required after these Repairs have been done.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Santa Fe makes a little weaving when shifting gears


Sounds like worn ball joints or/and tie rod ends. When the transmission shifts, power is momentarily removed from the front wheels. Worn components (expected now on a 2001) allow the wheels to change direction slightly, hence the "weaving" you mention.

Sep 26, 2017 | Hyundai Cars & Trucks

1 Answer

I have a 2004 santa fe that the temperature suddenly starting climbing and steam was coming fromunder the hood but no water leaks could be seen anywhere and the heater stopped heating


Didn't see any leaks, because all the coolent has already leaked out. 100% sure if you let it cool down, fill it up with coolent and restart it, you will soon find your leak. (if you don't find the leak just by adding coolent) Im willing to bet its your lower or upper radiator hose.

Dec 10, 2013 | 2004 Hyundai Santa Fe

1 Answer

Lower ball joint 2002 hyundi santa fe


Typically these are replaced with a complete lower control arm. What happens is the ball joint is reseeding the lower control arm and rusts. When the old ones pressed out it distorts the opening in the lower control arm. When the new one is pressed in they never fit tight. Anew lower control arm is very easy to replace. 1. Jack up the vehicle on the sub frame or pinch weld. 2. Remove the pinch bolt that holds the ball joint to the knuckle. 3. Separate the ball joint from the knuckle. 4. Remove the two bolts that secure the horizontal bushing to the sub frame. 5. Remove the single bolt that secures the vertical bushing from the subframe. 6. Remove the lower control arm. If you have any questions I'll be happy to answer them.

Sep 25, 2011 | 2002 Hyundai Santa Fe

1 Answer

How to change the front lower ball joints?


YOU MAY NEED TO REPLACE THE LOWER CONTROL ARM AND BALL JOINT AS AN ASSEMBLE. AFTER MARKET BALL JOINT ARE AVAILABLE BUT MOST LIKELY WON'T WORK. GO TO THE DEALER TO GET THE PARTS.

Mar 02, 2011 | 2002 Hyundai Santa Fe

1 Answer

How much would it cost to have my hyundai santa fe 2004 awd 2.7 transmition fix/change?


dealer was $1500 just for new one and $1000 core, with $1300 labor

Feb 15, 2011 | 2004 Hyundai Santa Fe

2 Answers

Ball joint is about to fall off replace lower ball joint right side 2000 accent


OK< ball joints, they are sometimes bolted on, I hope yours is, you have to get in there to see, But you will also need the parts first, when you buy the ball joint, you will know what you got, either welded to the arm or bolted, then you can take off the arm or the ball joint. Either way, it should be no problem getting the thing off, get the car up, wheel off, don't get your legs under there, get dirty, and you might need another bottle jack to lift up the arm to get the bolts on. Check it out. Hope this helps.

Sep 21, 2010 | 2000 Hyundai Accent

1 Answer

94 grand voyager how to remove lower ball joint. will i damage seal? I am replacing axle but not ball joint. I will use ball joint removal tool


That's the right way and only way to do this, just put some lube on the fork side, that will slide on the ball joint boot when removing joint.

Jul 12, 2010 | 2006 Hyundai Santa Fe

1 Answer

This is felipe i hafta change lower ball joints should i change the upper ones even though there still in good condition


Unless they have play, don't bother changing them. the lowers bear far more weight and therefore wear much faster.

Oct 06, 2009 | 2002 Hyundai Santa Fe

2 Answers

2002 hyundai santa fe transmission will not engage


You might have lost your lower gears, I would have someone look at it to see if your gears are gone or if its just a faulty sensor.

Jun 15, 2009 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...