Question about 2003 Hyundai Tiburon

1 Answer

Front bumper How easy is it to remove the front bumper cover?

Posted by on

  • 1 more comment 
  • Anonymous May 06, 2009

    well, I am about to go do that to my tiburon (2006) in about 5 minutes, i am putting on a kit...   i have read up and heard its really easy....

  • Dlcogan Jul 14, 2013

    I am working on removing both bumpers on a 2003 tiburon. I have the parts now I need to figure it out

  • Dlcogan Jul 14, 2013

    i have made my nephews tibby my project. He put a really crappy body kit. I have the originals parts and nee to put them on. I have 2 bumpers front and back and the front end. I also want to find out how to get a little more horse power out of it.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 51 Answers

If your a hands on guy not to difficult..... support the bumper.... unplug fog lights...unscrew several bumper screws and brackets... pull off.... same for installation... but lining it up could take time

Posted on Jul 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove front headlight assembly 2002 toyota highlander


I changed my 2001 Toyota Highlander headlights recently. First, remove the grille. There is one screw in the center which will require a loonng Phillips screwdriver to reach it, down behind the grille, right in the center. Then remove the four plastic clips at the top by prying them up with a small flathead screwdriver. The bottom just pulls forward. Important: Now go to each side of the car, and in front of each fender well, there is one clip that holds the bumper cover on. Pull the top corner of the bumper cover toward you to release the clips, one on each side, at the top corner, along the front of each fender well where the bumper cover meets the fender. The bumper cover can now be loosened along the top without entirely removing it. It just pulls forward. Inspect the underside of the bumper cover for broken clips and replace as necessary. Now remove the two bolts that hold down each headlight at the top. Disconnect the wiring and bulbs and wiggle the old headlights out. Install the new ones and reverse the process. If your AC isn't blowing cold, check the condenser for leaks before you reinstall the grille. A new aftermarket condenser/filter dryer is easy to install by removing the battery and tilting the radiator back to get the condenser out. A replacement only costs $75 and can be swapped out in one half hour with a few metric sockets. Then you will need to recharge the AC system with R-134a, which is easy. Just buy a R-134a kit with hose at Autozone and follow the directions. $50 Replacement fog lights are only $52/pair for aftermarket. You may consider replacing those as well. They have a strange installation with clips and you will need to pry/bop them forward, not remove them from the back. They are aggravating to replace but not technically difficult.

Apr 17, 2013 | 2003 Toyota Highlander

1 Answer

Removal of front bumper 1992 ford taurus


Simple and easy,
Buy the bumper cover new or cheep at junk yard your choice.
How to remove the broken/old bumper by first removing both head lights.
Then remove all plastic clips, yes you can just brake them off there cheep to buy at any auto store.
Then remove all main bolts from the top and underneath.
Then put new bumper on and reverse the steps.

Jul 08, 2012 | 1992 Ford Taurus

1 Answer

How to replace front bumper cover



Instructions

Engage the emergency parking brake, to avoid causing the car to roll or move when removing the bumper.

Release the screws holding the wheel well liners in place with a screwdriver. This will expose the screws holding the bumper bolts. Release the bolts holding the bumper in place, using a wrench, and have a friend support it while it remains wired to the car.

Disconnect the wiring running to the bumper to separate the fog lights from the car. Pull out the light fixtures from the bumper cover.

Remove the grill in the bumper cover, taking out the screws holding it into the cover. This will allow you to separate the grill and the bumper cover.

Secure the grill and light fixtures into the new bumper cover, using the hardware you removed from the old cover.

Reconnect the necessary wiring. Support the bumper cover in front of your car or have your friend hold it in place again.

Secure the bumper cover using the retaining bolts you took out earlier. Tighten the bolts to hold the bumper cover securely against the car.

Replace the wheel well liners with the screws you took out.


Jul 07, 2012 | 2006 Chrysler Pacifica

1 Answer

Remove front bumper


For front bumper removal,i suggest you to click the link below :---How to Replace Front Bumper? http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-front-bumper-on-audi-a4.html
-------How to Attach the front bumper cover to the fender? http://technoanswers.blogspot.com/2012/01/how-to-attach-front-bumper-cover-to.html

-----------------

This will help.

Thanks.

Dec 14, 2011 | 2007 Suzuki SX4

1 Answer

Can u replace vw beetle radiator, without removing front fenders ond nose. bottom plastic moldimgs are gone


NOPE YOU HAVE TO REMOVE FRONT FENDERS AND BUMPER COVER. REASON YOU HAVE TO REMOVE FENDERS AND BUMPER COVER.YOU CANT REMOVE RADIATOR HOSES AND REMOVE COOLING FANS.FENDERS AND BUMPER COVER IN THE WAY.

May 21, 2011 | Volkswagen Beetle Cars & Trucks

1 Answer

How do I remove front bumper cover?


To remove the front bumper cover you must first remove the turn lights in
the bumper. To do this remove the fog lights or the fog light covers by
removing the screw under the cover and remove the screw from the bottom that
holds the light in place. After doing this you will see a 12mm bolt behind
the light and one just to the inside of the lower grille. Remove all 4 of
these bolts(2 per side). Also remove the bolts /clips in the lower panel
under the bumper. The corners of the bumper near the fender actually slide
onto a stud that holds it in place. Just remove the bumper by pulling
forward. Sorry if this seems confusing but it is really pretty easy to do.

go to this link, once your on the acura site scrol down till you see the diagram
http://www.acura-legend.com/vbulletin/f4/bumper-cover-removal-128134/

Dec 21, 2010 | 1992 Acura Legend

1 Answer

How easy is it to change front fog light on Audi A4 s-line 2006


1. Remove the plastic grill cover out from front bumper.
2. Remove the front fog lamp & replace the bulb.
See pictures below:

edc40e1.png

3d0463d.png

Apr 01, 2010 | 2006 Audi A4

1 Answer

How you take off the front bumber


have 96, 95 similar

Section 01-19: Bumpers 1996 Villager Workshop Manual
REMOVAL AND INSTALLATION Bumper and Bumper Cover Front
Removal
  1. Raise and support the vehicle.
  1. Remove the RH and LH front wheel (1007).
  1. Remove the RH and LH front fender splash shield screws. Remove the RH and LH front fender splash shields (16102).




  1. Remove the four front fender brace screws.




  1. Remove the two front fender brace nuts.
  1. Remove the two plastic screws.
  1. Remove the seven clip buttons located under the front bumper cover (17D957).




  1. Remove the RH and LH front turn signal lamps (13369). Refer to Section 17-01 for the removal procedure.
  1. Remove the four front bumper cover brace bolts.




  1. Remove the front bumper cover from the vehicle.




  1. Remove the two front turn signal lamp wire harnesses from the front bumper (17757).



  2. Remove the eight front bumper bolts.




  1. Remove the front bumper from the vehicle.

Mar 02, 2010 | 1995 Mercury Villager

1 Answer

How to remove headight assembly 2002 passat


REmove front bumper cover and it is all right in front of you its really easy, the bumper needs removing because of a couple of fixings hidden by it.

Dec 22, 2009 | 2002 Volkswagen Passat

1 Answer

I need info on how to replace the headlamp bulbs on my 2008 Chevy Malibu, can you help.


The procedure is very involved.It requires the removal of the front bumper fascia fasteners from the center and side of the headlamp to be removed.
  1. Remove the front bumper fascia fasteners from the center and side of the headlamp to be removed, full removal of the fascia is not necessary. Refer to Front Bumper Fascia Replacement.
  2. Gently pull the fascia forward to allow clearance to remove the headlamp assembly.
  3. You will also need to remove some of the fasteners at the front of the inner wheel well.
  4. The Front Bumper Fascia is the plastic cover over your front bumper.
  5. You may also have to remove the plastic cover that is located under the front of the hood over the radiator.It extends to both sides.

Oct 27, 2009 | 2008 Chevrolet Malibu

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

688 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...