Question about 2004 GMC Canyon

2 Answers

2004 gmc canyon brake issue

All three of my brake lights do not work...it is not the bulbs and it is not the fuse..What could it be and how the heck do i fix it

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There was a recall on the brake light switch have ever had it replaced

Posted on May 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,055 Answers

Brake light switch,replace it
its under the dash at the top of the break peddle takes about 5 min too change

Posted on Apr 20, 2009

  • Dennis Mulford
    Dennis Mulford Apr 20, 2009

    brake light switch,replace it

    its under the dash at the top of the break peddle takes about 5 min too change

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No brake lights


No , if your blowing a fuse it is the result of a short to ground on the electrical circuit , wiring ! Do you know how to do automotive electrical trouble shooting ? Using a volt meter ? Do you know what a wiring diagrams is ? How to read one.
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
Free wiring diagrams here
http://www.bbbind.com/free_tsb.html Enter vehicle info. under system click on lighting , subsystem click stop lamps . Then click the search button , then the blue link. Use the wiring diagram to pin point testing locations in the circuits . Check out videos on youtube on finding a short .
how to find electrical short on most any car or truck
Finding The Source Of Electrical Shorts In Your Car


Jun 23, 2017 | 2004 GMC Canyon

3 Answers

Tail lights are not working correctly


I have to believe that with all of the "non related" issues happening that there is a wiring harness problem. If you track the harness back from the tail lights you will probably find a nick or a break in the line. If nothing shows then check the connection point which should be somewhere around your fuel tank. It will be a male/female fitting that will pull apart and you can check at that point with a meter if it is working to that point. If not it then you will have to work your way all the way up to find the fault point.

Feb 12, 2014 | 2004 GMC Canyon

1 Answer

2004 gmc canyon no blinking lights


This problem could be a fuse, flasher or signal light switch, the most common is a fuse or flasher, i would first check the fuses and is they are good then replace the flasher.

Sep 30, 2012 | 2004 GMC Canyon

1 Answer

Where is the brake lightfuse located at on my 2004 envoy xl


There is only one fuse for the brake light, so if the passenger side is working, the fuse is OK. You most likely have a bad bulb, bad bulb socket or a wire issue. The circuit board that all of the rear light are mounted to also has had problems in the past.
BTW - the fuses for the rear light are under the rear seat.

Jul 30, 2012 | 2004 GMC Envoy

1 Answer

I replaced my brake rotors on a 2004 gmc canyon and installed new brakes. everything works great, however my abs light stays on now.


IF you installed the wrong brake rotors,without the ABS reluctor ring[if equipped],the light will come on.Second possibility is you damaged the ABS wiring to the wheel speed sensor.There is a harness to each wheel.

Apr 17, 2010 | 2004 GMC Canyon

Not finding what you are looking for?
2004 GMC Canyon Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...