Question about 1992 Jeep Wrangler

1 Answer

1992 Jeep Wrangler (Manual trans)

Had some work done on the clutch and need to change the transmission oil. But I cant seem to find the place to pour it in. I heard it might be underneath. Can anyone help..

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Jeep Master
  • 599 Answers

The transmission filler plug is located on the side of the transmission itself,must be done from under neath.suggest you use a suction type gun to get the fluid out of the bottle and into the transmission, if you need further help just get back to me.please rate my fix as i strive for the best. Ray

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep sluggish between 15-18 rpms during shifting from gear to gear. what is the problem


i cant get that slang, DIff , gears, clutch to jibe. 1990 wrangler YJ
what does DONE mean.?
front or rear diff axle new, new transmission? what?
1500 to 1800 rpm 15 is engine stalled, or rpm of oil tanker ship.

got a MANUAL stick or automatic slush pump gear box?
but is no way to answer. you.
its a hydromatic A/T. right>? AUTO?
if yes,it has.
no electronics then. so clean AFT/ levels per operators guide not guessing? hot?
stall test pass (ask)
line pressure tests pass
kick down cable not stuck
or if M/t do say so, mine is, 5 owned..

but we only have one word here, sluggish to work with,
so that can be :
1: engine weak? (low rpms in all gears, and low power)
2: Trans slips (or flares) High rpm and low power (slip)

which is it?, the rpm in each gear answers that.
the FSM shows the range of rpm for each gear. ever seen a real FSM book? factory service manual.


Feb 14, 2015 | 1990 Jeep Wrangler

1 Answer

Can you add lube to rear axel in 2006 jeep wrangler x?


Yes on the rear diff. There's a plug on the back of the housing about 2/3rds the way from bottom. Remove that plug and stick your finger in to first knuckle and bend it down to check the fluid level. If you get oil on your finger tip, it's got oil in it. If not, put oil in till it's at the bottom of said hole. Put the plug back in a tighten it and You're done.

Nov 11, 2017 | 2006 Jeep Wrangler 4.0

2 Answers

Hard shifting 1st to 2nd gear. And 4th gear wants to pop out have to hold in with shifter. 1991 Jeep Wrangler. Worse when cold.


Sounds like the trans needs to be rebuilt as it's been abused. The clutch may be dragging during shifts and not completly disingaging or a lasy driver does'nt pust the clutch in all the way. If the clutch isn't the problem the oil in the trans should be ATF and if someone put in 80-90 it'll do this but jumping out of high and the shifter isnt itting the floorboard as a bad trans mount or motor mount may let happen, The trans is damaged and a used unit is cheaper and quicker to get done. Rebuilding the trans with all the parts it may need cost more than your truck is worth

Dec 05, 2009 | 1991 Jeep Wrangler

1 Answer

How to remove/install a 4 cylinder jeep Yj


If you need to ask, you have never done one. I suggest that you get a chiltons or haynes manual to guide you through it. tips are: use large bolts without heads to guide the transmission back onto bellhousing so you don't need to hang the unit on the clutch disc and risk bending it. Change the pilot bearing in the back of the crankshaft if it's the least bit worn, be very careful not to damage the crank sensor on the bellhousing, and use a good pilot shaft when aligning the disc inside the clutch cover. spread some white lube on the input shaft and front guide collar on the transmission and make sure the throwout bearing has sufficient grease in the inside groove.
good luck!!!

Sep 29, 2009 | 1992 Jeep Wrangler

2 Answers

The clutch in my 92 Jeep Wrangler suddenly stopped working.


pull the boot back on the master and see if it is wet do the same with the slave

Apr 25, 2009 | 1992 Jeep Wrangler

4 Answers

Dont know were to put in new transmission oil on a 1992 Jeep Wrangler


the plug of the transmission of 1992 jeep is under the transmission case .

Apr 20, 2009 | 1992 Jeep Wrangler

1 Answer

2000 jeep wrangler are sythetic lubes used in axils and trans


Hello grega1967, your Jeep Wrangler came from the factory with gear oil in the axles and manual transmission, but the transfer case uses transmission fluid. It is a NP231 and your axles are Dana 30 in the front and Dana 35 in the rear. They should have a 4.10 gear ratio due to you having a 2.5 liter 4 cylinder.

I hope this helps,

map6260

Mar 12, 2009 | 2000 Jeep Wrangler

1 Answer

Need to change manual transmission fluid


pull the lower plug from the transmission, it will be on the bottom or the side on the bottom. replace the plug after draining and remove the fill plug wich is about half way up the side of the transmission. use 75w 90 gear oil in the trans.
good luck

Aug 31, 2008 | 1999 Jeep Wrangler

1 Answer

Jeep Troubles


sounds like the clutch is failing before changing the clutch check the trans fluid for metal hunks or sliver fluid if that is present u might have an internal trans failure

Jun 19, 2008 | 2000 Jeep Wrangler

Not finding what you are looking for?
1992 Jeep Wrangler Logo

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...