Question about 2000 Buick Park Avenue

2 Answers

Buick utlra park ave has service engine light on and keeps stalling and evenutually completely cuts off Can restart but still runs rough then cuts off while in drive Has smell of rubber burning also

Buick utlra park ave has service engine light on and keeps stalling and evenutually completely cuts off Can restart but still runs rough then cuts off while in drive Has smell of rubber burning also

Posted by on

  • honeymokey
    honeymokey May 11, 2010

    Are you losing coolant also?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It could be the crankshaft sensor. That's what my 2000 was acting like until it was replaced.

Posted on Aug 24, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 299 Answers

Sssounds like cat is clogged.

Posted on Jun 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 park ave ultra is hesitatating when I start using the gas as I start an incline mostly but sometimes just randomly an it's getting worse


Engine Stalling Due to Mass Air Flow/Crankshift Position ...

repairpal.com > Problems > Buick > Park Avenue
Buick Park Avenue Engine Stalling Due to Mass Air Flow/Crankshift Position Sensor Failure. This is a verified ... 1997 Buick Park Avenue- 3.8L V6160,000Visitor. Engine stalls ... car runs then stalls and won't start for thirty minutes. Upvote (36).

Buick stuttering Questions & Answers - Fixya

www.fixya.com > Forum > Tags > stuttering
94 Buick Park Avenue that stutters under a light load I have a 94 Buick Park Avenuethat ... Buick Century 97 runs rough and stutters when cold and gas applie Engine runs rough ... I have a 1994 buick lesabre it starts ok but stutters and stalls.

Oct 30, 2015 | Cars & Trucks

1 Answer

1990 Buick Park Ave.


clean the idler on the intake and also clean the throttle sensor, it would also be best to change the air filter and clean the maf sensor. Idler does more than just idle vehicle it controls low revs, and drop down from reves. throttle sensor tell ecu what air to add to the fuel. and the MAF tells ecu how much air is coming into the intake. also check for broken cracked vacuum lines.

Jul 17, 2017 | Cars & Trucks

1 Answer

1995 Buick Century. Engine stalls after ~5 minutes when started warm. Engine runs rough for a few seconds before stalling. Happens even at highway cruising speed. Will crank and fire and stall when you...


Using excessive fuel cleaner can damage injectors and the fuel pump - sounds like your problem is the fuel pump bearings, and you will probably have to have it replaced.

Jun 13, 2017 | Buick Century Cars & Trucks

1 Answer

My 87 buick centry stalls while driveing but when it stalls the battery light and service engine light comes on but once i put the car in park or nutrol it will start back up


My 1987 buick centry limited cuts off when i drive but when i start it back up it will start right bacc up at times some times it starts and die agin but when it dies the battery light and service engine light comes on but once it starts the service engine and battery light goes away and dont do it agine tell it cuts off agine

May 27, 2012 | 1987 Buick Century

1 Answer

92 Park Ave stalls, no codes..!


Sounds like the ignition module that sits under the coil packs ... did you ever get any codes out of it when the light was on ?

Jul 29, 2010 | 1992 Buick LeSabre

1 Answer

I have a 1991 Buick Park Avenue. Runs rough in


Here are the common cause of surges, cold stalls, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours.
To correct this problem I want you to get a can of intake cleaner (ABOUT $5.00) from any local auto parts store like NAPA or Carquest, do not use carburetor spray, intake cleaner only or u will damage the Teflon coating inside the throttle valve and air bypass valve, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

May 25, 2010 | 1991 Buick Park Avenue

1 Answer

I just purchased a 1995 Base Buick Park Ave 69,000 miles. In less than 50 miles it had stalled on interstate after a short jerky rough idle event. After stopping I was able to restart the car with a rough...


Hi Larry,

Firstly, you need to query your vehicle's onboard diagnostic computer to see if the computer has retained any fault codes.

Can you please confirm if you vehicle has this Data connector under the dash (above the knee on either driver or passenger side):

29efed1.gif

If yes, then I will show you have to extract the codes, by jumping the appropriate pins.

Await your response...

Scott

Nov 12, 2009 | 1995 Buick Park Avenue

1 Answer

1992 buick park ave


have you replaced your ignition module?

Sep 02, 2008 | 1992 Buick Park Avenue

Not finding what you are looking for?
2000 Buick Park Avenue Logo

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...