Question about 1993 Oldsmobile Cutlass Supreme

2 Answers

Car wont start

Where is the crank sensor on olds 1993 cutlass 3.4

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just took car up to the shop now wont start say it's an sensor what do i do

Posted on May 24, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

Behind the harmonic balancer in the front of the motor

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 olds mobile cutlass ciera s wont start cranks fine replaced fuel pump filter still wouldnt start moved some wire around near ac compresser n it started now 3 wks later wont start all day today ne...


Will need you to do some troubleshooting. Can you do a spark and fuel check for me? Please see my tip at http://www.fixya.com/cars/r5821173-doesnt_car_start_gasoline_engines . These are genericinstructions.

Aug 28, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Car wont start. replaced fuel pump (twice), fuel filter, fuel strainer, tested starter, replaced crank sensor, replaced computer. can put fuel directly into intake and will start.


Definitely not a knock sensor.

Just to clarify, you spray starting fluid in the intake and it will start and run for a short time and then stall?

Oct 02, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

My 1993 cutlas supreme stalls randomly while idling or driving , but restart right away


You will need to change the crank position sensor first and see if it corrects the problem. It is located behind the engine near the firewall. It's a bit tricky to get to it, you would need to rotate the engine forward then look under the exhaust manifold and under the cylinder closest to the drivers side. Use a 10 mm deep socket to loosen bolt. After replacement and it is still stalling then you will need to replace the ECM (vehicle computer). If it turns out to be the computer, go to your local junkyard to get an inexpensive replacement Click on the link below to view the CPS, it is around $22

http://www.partstrain.com/store/?N=0&Nr=AND(make:Oldsmobile,model:Cutlass+Supreme,year:1993,brand:Delphi,part:Crank+Position+Sensor)&ptc=S1171391678W45d204bec356b&ptid=ptc45891f6tnywz&id=Olqtv7cphi





Olds-Cutlass-Ciera.htm">http://en.allexperts.com/q/Oldsmobile-Buick-Repair-826/f/1992-Olds-Cutlass-Ciera.htm

Apr 12, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

93 olds ciera stalls when slowing down or stoping


tcc stuck try unpluging it and see if same but dont drive with unpluged will burn up transmission also could be fuel pump . or crank shaft postion sensor . try the tcc first then vheck fuel presure , and then check for codes with scanner

Jan 28, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

CUTLASS SUPREME 88


It's on the front at behind the crank pully. They did have problems with it. It would cause stalling no starts and lack of power

Sep 14, 2009 | 1993 Oldsmobile Cutlass Supreme

1 Answer

89 olds cutlass supreme hard time turning over


My 89 olds cutlass did the same thing....Shop fixed her, they replaced the knock sensor....I also had the fuel filter replaced, they sold me a can of MG injector cleaner too..Out on the highway the service engine light would come on and she would cut out under a load....Then she would crank but not start ( she would start eventually).....Runs great now....bill was $250

Aug 18, 2009 | 1993 Oldsmobile Cutlass Supreme

1 Answer

My 1993 Olds 88 wont start cranks but wont kick over. Fuel prob


3.8 are known for ignition trouble but first use the fuel release valve located on top of engine under a screw cap to see if your getting fuel. It takes 4 things to make engine run fuel spark air and compression. But most likely the Ign control module or crank sensor. So try this
1) check the fuel pressure
2) check for spark
3) compression test

Apr 26, 2009 | 1988 Oldsmobile Delta 88

1 Answer

Car wont start after driving


Ignition module is the likeliest place to look.

Oct 17, 2008 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1993 Oldsmobile Cutlass Supreme Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...