Question about 2001 Daewoo Leganza

1 Answer

On the front part of the exaust, there is a small box. On the box is a hole which runs almost around the box. I have patched the hole with exaust sealant about three times now, but the problem is, when the sealant hardens, it breaks off whenever I go over a hidden pothole or drive on rough terain. I cannot afford to go to a repair shop as I have been layed off. I could not find a breakers yard that has a Daewoo Leganza 2000cc CDX 01Reg. exaust front. Can you help please?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

You could try using a muffler bandage instead of putty that will not come off

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water leaking unto front floor carpet when driving through rain


Check around the edges of the windshield for any place water could be forced into the car. Especially if the windshield has been replaced. Check around the cowl that covers your windshield wiper motor. Remove the cowl if possible to check for rust holes or separated seams in the metal. The blower motor intake for the cars HVAC (heater) is often under this cowl. Make sure water isn't getting in through there. If you find a leak around the windshield or a separated seam, some windshield urathane or clear bathroom caulking would work. If you find a rust hole in a non visible place affix a tin or metal patch over it using rivets or your choice of fastener. Welding is the best method. Then cover the patch with short strand fiberglass bondo or something else to seal out water. If you have a hole in the floor you could put a patch on it with rivets or weld, then tar the underside well and put rocker panel coating on the top.

Sep 20, 2011 | Toyota Corolla Cars & Trucks

2 Answers

I was wondering if anyone could tell me how to fix holes in my exhaust on a Buick 99 century custom


An exhaust shop may be able to patch it up, but I recommend putting on a new exhaust. It will help out your vehical in the long run and improve the performance. Hope this helps! Please rate 4 thumbs up!

Apr 19, 2011 | 1999 Buick Century

1 Answer

The check engine lighr comes on & stays on at 69k mikes- Iver tightened the Fuel cap.. Whats happening ?


2002 isuzu axiom engine light was off and on replaced the egr rear top left engine 2 bolts and snap out harnes, make sure you clean well with carb cleaner while running, plug back openning to exaust as flames may ocur from exaust and carb cleanner is combustable. spray carb cleanner in front hole little by little while engine is running. you will now by hesitation of engine when spaying.

Feb 24, 2011 | 2002 Isuzu Axiom

1 Answer

The peice that coms off engine to exaust y pipe? but has 4 pipes an goes to one. the exaust whats it called?? it has a crack an a hole in it an exaust is loud!.?????


Pollution control,air injection,you could just pinch the small pipes closed with a pair of vice grips and never know the difference.

Nov 21, 2010 | 1999 Plymouth Voyager

4 Answers

I have water leaking on the passenger floor board when it rains and I can't find were it's coming from.


Check the seal around your interior air filter. The seal can come off at one corner and allow water to run down the firewall and into the passenger side.

Apr 02, 2010 | 2002 Chevrolet Impala

2 Answers

Muffler


Call your local muffler shop.

Nov 25, 2009 | 1997 Chevrolet Suburban

1 Answer

Where is the ac drain hose


Normal 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} -- open the driver's door
-- locate where the air conditioner blower box is attached to the passenger side of the firewall – see photo #1 – look to the immediate right at the top of the gas pedal arm
474e59d.jpg
-- condensation flows toward the front of the vehicle through the firewall at the leftmost edge of the air conditioner blower box – drain channel
-- open the hood and stand next to the front wheel on the driver's side
-- look down at the firewall over the battery and to the passenger side of the brake master cylinder – see photo #2
7fa75c5.jpg
-- locate the small diameter metal tubes running horizontally and attached to the engine compartment firewall
-- locate the hole in the engine compartment firewall panel behind the small diameter metal tubes
-- this hole leads to the drain opening in the air conditioner blower box mounted in the passenger compartment
-- follow the brake tubes as they run from under the vehicle and turn toward the front wheel on the driver's side
-- locate the hole in the engine compartment panel behind the brake tubes
-- insert a short length of stiff wire into the hole through the engine compartment panel to unblock the drain hole

Jul 11, 2009 | 2004 Mitsubishi Endeavor

2 Answers

1999 Chevy S10


Just pull the dash back a little by undoing all the bolts and screws, its going to be a tight fit find someone with small hands.

Oct 21, 2008 | 1999 Chevrolet S-10 Pickup

1 Answer

Broken exaust pipe


This isn’t that easy. Most of the so called “high temp epoxies and glues” will not take the temperatures. If you can find some “muffler patches” that have the high temp cloth. You may be able to wrap it around the break. Then you will need to get some wire to tie the cloth tight like the wire ties on a bread loaf bag.

Jul 05, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2001 Daewoo Leganza Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...