Question about Mitsubishi Lancer Evolution

2 Answers

Tech. data engine torque settings for a mitsubishi evo x

Posted by on

  • David Peel
    David Peel Apr 20, 2009

    Hi, no the engine is a new one engine type 4B11T if you can let me have big end and main bearing torque setting that would be a big help - thanks



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The Torque is 78 nm and then loosen off .torue to 20nm+90+90,start in the middle and work out as per normal

Posted on Jul 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 243 Answers

Do you mean the whole lot of settings? What engine you've got there? 4G63? If you jut down the list of things you need, I can give you the manufacturer's specs.

Posted on Apr 20, 2009

  • Armel Aubeelack
    Armel Aubeelack Apr 22, 2009

    Hi there, I'm really sorry but could not find any torque setting for you at this stage.

    Try asking your local dealer's parts manager as he might be able to help you out.




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Mitsubishi torque settings

Check out a manual from the library ,, You may be able to call and ask the dealer service tech ,

Aug 28, 2014 | Cars & Trucks

2 Answers

What is the cylinder head bolt torque settings fir a 4g69 mitsubishi engine ?


Apply engine oil to the thread of the bolts and to the washers.
Tighten the bolts to the specified torque, using the tightening sequence shown.
Tightening torque: 54 ft-lb +/- 2 ft-lb
Loosen all bolts fully in the reverse order of tightening.
Re-tighten the loosened bolts to the specified torque in the tightening sequence shown.
Tightening torque: 15 ft-lb +/- 1 ft-lb
This step is to make it easier to ensure you are making 90 degree turns. Make a paint mark across each bolt head and cylinder head.
Tighten the cylinder head bolts 90 degrees in the specified order.
Tighten the bolts another 90 degrees in the specified order and check that the paint marks on the cylinder head bolts are aligned with the paint marks on the cylinder head.
Link to the guide for this engine:

Aug 04, 2014 | 2007 Mitsubishi Outlander 2.4

2 Answers

Engine torque settings mitsubishi 4d32

im looking for information by a 4d32 Mitsubishi , help!!!!!! thanks

Apr 03, 2012 | 1988 Mitsubishi Cargo

1 Answer

Head torque settings on hc engine

head torque is in 3 parts....
stage1....... 20nm
and stage3 .......49 to 59 nm so anywher in middle

valve clearance inlet 0.25mm hot
and outlet 0.33mm hot

hope this helps and if need anymore tech data just let me know and ill try and sort it for you
please leave a comment and a thumbs up.... cheers

Dec 22, 2011 | 1990 Daihatsu Charade

1 Answer

Tech A says that normal head bolt torque valves have a calculated safety factor of about 25% less then the max amount a bolt can be torqued without becoming permanently stretched. tech B says that the...

I would think that it would depend on the engine manufacturer that makes the specification in order to not stretch the bolt permanently.

I always just follow what is in the book using a torque wrench.

Jul 12, 2010 | 2003 Mitsubishi Galant

1 Answer

Do u have evo 9 engine torque settings

its in ur owners manual or go online to alldata buy a subsription for like 50$ then copyit and put it on a PDF and cancle your subsrimtin that way ull now every thing about your car and u realy wont ever have to take it to the dealer or mechanic

Jan 24, 2010 | Mitsubishi Lancer Evolution Cars & Trucks

1 Answer

How to change a cambelt on an evo 6

u need to get the cama set right and engine locked u really need some 1 that knows what doing alot aof money if udo it wrong or u can try evo lancer forums

Oct 01, 2009 | 2006 Mitsubishi Lancer Evolution

1 Answer

Mitsubishi evo6 headbolts

Hi there, make sure you measure your bolts measure 96.4mm for a 4G93 engine.
Then you must tighten 35Nm-75Nm- slacken completely- 20Nm- 90degrees-90degrees.
No retightening of the head bolts is required as these bolts are tightened in the plastic zone.

Feb 07, 2009 | Mitsubishi Lancer Evolution Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides