Question about Mazda MAZDA3

Open Question

Replacing a water pump 2005 mazda 3

How long does it take to replace a water pump in a 2005 mazda 3 2.3L. What do you have to do to remove it?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75077 Answers

SOURCE: water pump replacement in a 2002 Mazda MPV

The reason is the water pump is driven off the timing belt, extra parts and allot more labor. No the eng does not have to be removed, labor time around 4 hours, parts about, about $125 US for parts, if it is a dealer add $75 US

Posted on Jan 08, 2009

motor1258
  • 6674 Answers

SOURCE: 2005 Mazda 3 starter replacement

Scroll down when you click on this link, and find your engine, click on pictures to expand.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801a0a28

Posted on Feb 13, 2009

  • 1 Answer

SOURCE: Dodge 2005 Grand Caravan water Pump replacement

how difficult is it to change a water pump on a 2005 caravan 3.3L?

Posted on Apr 16, 2009

  • 205 Answers

SOURCE: fuel pump removal in a 2005 mazda 6 4 cylinder

you have to use a screw driver and hammer to tap it to the left until the tabs line up with the notches on the ring.

Posted on May 21, 2009

  • 117 Answers

SOURCE: Replace 2005 Cadillac CTS water pump

drain the coolant.remove belt by rotating belt tensioner cllockwise. water pump pulley will require a holding tool to keep it from turning while removing bolts. access to air ratchet can sometimes eliminate the need to hold but be careful cause thats a good way to skin some knuckles. also make installation more difficult to obtain proper torque. after pulley is off just a few water pupm mounting bolts remain. clean and dry gasket surface very well before reinstalling.

Posted on Nov 07, 2009

Testimonial: "Very quick with a response, and good info!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve engine


Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...
4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l
4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement



Dec 03, 2015 | Mazda Cars & Trucks

1 Answer

What will happen if the timing chain on a 2005 mazda 3 snaps willit ruin motor


Yeap sure would but why will it snap, chains last along time I only replace a chain if it gets a bit stretched and starts to rattle and then I usually rebuild the motor, rings, bearings, valve grind, water pump and any thing else while its a part and looks like it needs a birthday, but if you just want to keep it going and compressions good and oil pressures good I have just done the chain to quiet it done and done thousands of miles with no problems every engines got its own problems to figure out. cya Neil

Sep 01, 2014 | 2005 Mazda 3

1 Answer

Water pump belt


For water pump replacement i suggest you to check the help link provided below.

click the link below :----

Water pump replacing procedure for all vehicles?

http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
---------

HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------
How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

---------
How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

---------
How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

-------
Where is Water Pump located ?

http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

-----------

This will help. Thanks.

Feb 07, 2012 | 2005 Mazda Tribute

1 Answer

How much does it cost to fit a timing belt to a mazda 3 2005 model


Here in Indiana around $600.00. This would include timing belt kit and a water pump, if it's in there with it. No pump drop about $75.00

Apr 26, 2011 | 2005 Mazda 3

1 Answer

When do Mazda recommend changing the cambelt on a 06 mazda 6 2.o petrol engine


change it assuming your talking about the belt that drives your water pump, you could do it yourself in five minutes......

3/4" wrench lock onto tensionor push forward remove small belt, install in reverse.......

Feb 08, 2011 | 2005 Mazda 6

1 Answer

Instructions to replace water pump on 2000 Mazda Precidia


1. Depressurize and drain the cooling system. 2. Loosen the alterantor adjustment and remove the belt.
3. Remove the water pump pulley.
4. Remove all the timing belt covers.
5. Loosen the timing (camshaft) belt tensioner and slip the timing belt off the camshaft toothed pulley (ensure you do not move the positon of the camshaft)
6. Unbolt the lower radiator hose fitting and heater retrun pipe.
7. Unbolt the waterpump from the block (5 bolts).
8. Remove all traces of the old gasket before mounting the new pump (Permatex spray on gasket remover works well).
9. Install the new pump and reassemble in reverse order to above.

Jul 31, 2009 | Mazda MX-3 Cars & Trucks

1 Answer

Water pump replacement in a 2002 Mazda MPV


The reason is the water pump is driven off the timing belt, extra parts and allot more labor. No the eng does not have to be removed, labor time around 4 hours, parts about, about $125 US for parts, if it is a dealer add $75 US

Jan 08, 2009 | 2002 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...