Question about 1995 Buick Regal

1 Answer

1995 Regal Custom ABS light on and RPM moves when signal

My regal usually runs great, but recently whenever I signal the RPM needle moves slightly and the headlights dim. Also, the signaling pace has slowed dramatically. ABS light comes on too. I've taken it to a mechanic, ABS is fine and they replaced a lose connection which seemed to fix everything for a short time, but now it is having the same symptoms. Any recommendations?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have a problem with your elitrickle system i had the same problem and it was a short in my wires

Posted on Apr 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 Regal Custom, ABS code #95 brake switch circuit and no brake lights. Replaced SLS still no change.


Check the brake light switch (location pedal) unplug the switch & bridge the wires & if the brake lights come on the switch is faulty. all you are doing by bridgeing the wires is bypassing the switch. What is SLS?

Oct 10, 2012 | Buick Regal Cars & Trucks

1 Answer

RPM gage problem.


Replace the ignition module for the rpm and the spark control runs off this item

May 20, 2010 | 1995 Buick Regal

3 Answers

Rear brake lights don't work , but center brake light does.


brake lights won't work, but the center does ??? u need to change your turn signal switch which is in the steering wheel. i changed mine and it worked great .....


hope that helps
s2g1

Apr 22, 2010 | 1995 Buick Regal

1 Answer

'95 Buick Regal GS 3rd brake lights don't come on.


my 02 has 2 nuts in the trunk then it will lift out of the cat walk

Apr 19, 2010 | 1995 Buick Regal

2 Answers

95' Buick regal, 3rd brake light works, tail lights work, turn signals work, stoplight switch seems to work ie 3rd brake light working, fuse is ok, changed bulbs, but no rear brake lights.


If the third brake light works and the regular ones don't, it is most likely a bad turn signal (multifunction) switch. The switch is able to kill the brakes lights to run the turn signals, and in rare circumstances does this. I've seen it several times. It could also be wiring, especially near the turn signal switch, but it is usually the switch.

Nov 25, 2009 | 1995 Buick Regal

1 Answer

I have no turn signals and no rear left break lights


Could have a shorted wire or bad relay. The relay is usually located under dash panel

Jul 09, 2009 | 1995 Buick Regal

1 Answer

My turning signal doesnt work


i would start with putting a new bulb in even if it lights up it can be a bad bulb

Mar 17, 2009 | 1995 Buick Regal

2 Answers

HAVE A 1995 BUICK REGAL WITH NO BRAKE LIGHT EVERYTHING WORK BUT NO BRAKE LIGHTS LIGHTSBULBS FUSES CHECK GOOD. HELP THANKS TOM


I had this same problem. I replaced the turn signal switch in the steering column and it worked great. To test for this, check your lights while wiggling your hazard light button and/or signal lever. When I pulled my hazard button forward, all my lights would come on.

Dec 12, 2008 | 1995 Buick Regal

2 Answers

Check Engine light & slight hesitation


If you look under the cat. converter there might be a plug that you can remove to clean it out with.If you remove the plug then just rib - up the engine a time or two .That will clean it out for you.If the code that Auto Zone pulled up was PO420 then you might start by replacing the 02 sensor that's right before the cat. converter.

Jun 26, 2008 | 1995 Buick Regal

Not finding what you are looking for?
1995 Buick Regal Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...