Question about 2004 Cadillac CTS

1 Answer

Car will start put won't go when i accelerate? its a 2001 chrsler sebring

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Most likely your EGR is shorted and has lost throttle response . if so replace it . you may be able to buy this aftermarket hopefully ! this problem is pretty common with newer vehicles and won't always throw a trouble code . Hopefully this will help , if not you have serious issues with your engine . Best bet is to call your mechanic on this one . 97-02 sebrings had numerous electrical and control issues , your problem could lie anywhere and cost you to death chasing it down ! consult a pro soon before you get in too deep ! good luck !!!

Posted on Apr 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 chrsler kill switch reset


post the symptoms. guessing names of parts that dont exist is no good.
post them.
a sebring has no KILL anything, sure KEY OFF<or RADIO off.
what dont work right. car has 3000 parts name one. please.

Jun 24, 2014 | 2004 Chrysler Sebring

1 Answer

Torque specs for rod bearings on 2001 chrsler sebring 2.7


Go to your local library and see if they carry Chilton's manuals for car repair. Usually many of them do and you can find your specs there.

Aug 30, 2012 | 2001 Chrysler Sebring

1 Answer

2.7 motor won't start I changed the plugs and it


have you calibrated those plugs well ? .050 inch its the gap calibration for that type.

5_12_2012_1_12_45_am.jpg

May 12, 2012 | 2001 Chrysler Sebring

1 Answer

I have a 2001 chrysler sebring the starter won't


sounds like your bendix on the starter spring load mechinism gear you will need to test it by removing your starter and hooking up a battery to it. You will see and hear the gear come out and turn...if it doesnt function properly then you will have to replace your starter.also may want to check the solinoid..

Nov 02, 2011 | 2001 Chrysler Sebring

1 Answer

After doing a head gasket repair 2001 Chrysler Sebring 2.7 v6 won't start. It makes a noise like growling but does not turn over. My mechanic is saying we may need to rebuild bottom half but makes no...


You say that it does not turn over, how would you know there's no compression if it don't turn over, unless you mean if won't start up, lets go with it won't start up, if you have no compression, did you bleed down the lifter's, if you did not, with the lifter pump up will hold the valves open and you will not have compression, will be very hard to start engine, remove lifter and bleed them down, also make sure you replace the oil just in case there's water in the oil pan when heads were removed, if there is water could lock engne, now you would need to overhaul lower engine, hope this was very helpful.

Oct 10, 2011 | 2001 Chrysler Sebring

1 Answer

2001 Chrysler sebring, sometimes i will have to turn the key over for about 4-5 seconds to start it. While driving it, when accellerating it will hic-up and kick back into acceleration. Starter,...


I would take it to get the codes checked, it may be the distributer polling. Or simply a dirty fuel filter. Run some $8 Octane booster and injector cleaner in the tank. Good luck.

Nov 19, 2009 | 2001 Chrysler Sebring

2 Answers

Reset oil change message.


YOU TURN IGNITION TO RUN POSITION..ENGINE OFF..PRESS ACCELERATOR 3 TIMES WITHIN 10-15 SECONDS..RELEASE AND TURN KEY OFF..THEN START VEHICLE,IT SHOULD BE RESET

Jul 11, 2009 | 2008 Chrysler Sebring

1 Answer

1998 Chrsler Sebring coolant gurlges - now overheating


yes some systems have to be burped or the boil over can occur in the motor and cause head gasket issues..at 195k i think you should check the system for leaks and thermostat if it is opening at right tempatures or is slow..plus the vented cap on your radiator check with vacuum gauge if it holds about 12-14 psi before it vents...

May 07, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2004 Cadillac CTS Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...