Question about 2003 Hyundai Accent

1 Answer

Car wont start sometimes when clutch is pushed in.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 469 Answers

Look up under the dash at the clutch pedal arm, if your car is equiped with a cluch safety switch, the switch may be out of adjustment or in need of replacement.
Check the switch, connectors and adjustments.

Hope this is of some help.
Ed

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When did the vw transporter be come computureised my is a 1997


Computer has no impact on starting an engine by pushing it by using the manual transmission and the clutch. If it cranks and wont start normally, pushing it wont do anything to start it either.

Feb 18, 2017 | Cars & Trucks

1 Answer

Why wont my 93 f250 not start clutch engaged all the way to the floor


check for air in the clutch system , not allowing the pressure to activate the switch

Oct 24, 2015 | Cars & Trucks

1 Answer

Somtimes my car wont start


clutch start switch could be failing. but check battery volts make sure battery 12.6 volts and clean battery cables and battery posts if they corroded if looks badly corroded. replace both battery cables.

Nov 19, 2013 | 2001 Ford Focus

1 Answer

My car wont start sometimes i can push start it but it wont jump start is that clutch pedal lock switch?


sounds like clutch switch, Check under dash follow clutch pedal up and see if there is a switch under dash, should be Purple wires going to it Heavy gauge wires, need to unplug it and put a jumper in from one side to other and cover with tape so it doesen't touch and ground out and blow a fuse, then see if it will start and if it took care of your problem, if so replace switch

Jan 05, 2012 | 1999 Saturn SL

2 Answers

My clutch works sometimes and sometimes it don't. I was driving came to a stop, tried to go it sounded like the clutch popped out of gear or something broke. My car wouldn't go so I got towed. but...


A clutch that's failing doesn't behaves like that - it slowly starts slipping until it fails completely and definitely. If it would break suddenly (like when the pressure plate would snap) the noise and the vibrations it would generate would be unbearable.
No, in your case something is failing inside the transmission/gearbox - most likely in the command forks and their locking pins. The gearbox will have to taken off the car and dismantled to investigate and fix that, and it will be expensive.

Sep 25, 2011 | 1994 Toyota Corolla

1 Answer

Transmission wont engaged when mashing the clutch


Sometime this can be a sign of a bad clutch plate. This happens when you are pushing in the clutch, but the wheel that locks the clutch into the next gear just keep spinning.

Nov 28, 2010 | 1997 Hyundai Accent

1 Answer

After being stored clutch willnot engage


do you mean wont disengage? does the pedal feel normal, or like its pushing nothing?cant put it in gear? or goes in gear but wont move?. if you put it in gear but car wont move, the clutch is toasted. if you can put it in gear with the engine off, but not when its running, check the clutch master fluid. if its low or out, then the slave or master is leaking and you will need to replace both. if the clutch arm IS working, and the pedal feels normal, sometimes you can put in gear, and start it with the clutch pedal depressed and drive it, and goose the gas to "break the disc loose"

Oct 14, 2009 | 1997 Suzuki Sidekick

1 Answer

Push clutch in to start car wont start? starter or clutch switch?


It is quite possible it is the clutch switch. If it wont turn over this is quite possibly the problem.

Jun 16, 2009 | 2003 Ford Mustang

1 Answer

Car has trouble starting


try tightening your clutch cable

Jun 02, 2009 | 2001 Hyundai Elantra

Not finding what you are looking for?
2003 Hyundai Accent Logo

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...