Question about 1992 Chevrolet C2500

1 Answer

Cant shift unless i compression shift

I have a 1992 Chevey 6.5 turbo disiel 5 speed over drive. After hauling a heavey load my truck wont go into gear. I can only put it in gear when the truck is off and have to shift on compression. Has my clutch went out or could it be my slave cylender. How do i go about ckecking it.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Chances are pretty good your clutch is toast ! If your truck has a hydraulic clutch , in which mine doesn't , get a friend to pull the boot off of the clutch fork , and with a light , make sure it is disengaging the clutch at all . If you have a mechanical clutch , simply adjust it out til the problem goes away . Look forward to a new clutch very soon ! good luck !!

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 Jeep Cherokee does it have a modulator valve on it to keep it from shifting into 3rd


Jeeps have an ECM ( Electronic Control Module) on the transmissions as well as the engine.

Nov 04, 2016 | Jeep Cherokee Cars & Trucks

2 Answers

18 wheelers what rpms do I start shifting from 1st to 2nd when hauling 80,000 lbs with a Detroit engine and 13 speed tranmission


1st 1000 rpm
2nd 1300 rpm
3rd 1400 rpm
4th 1500
5th 1600
6th 1700
7th 1700
8th 1700
etc

Oct 14, 2015 | Cars & Trucks

1 Answer

Overdrive


Check detent cable adjustment at throttle body.

Mar 20, 2014 | 1992 Ford Mustang

1 Answer

01 w3500 gmc cab over trans wont shift into 6 th gear


Is there an over dirve button some where on the shifter or on the dash. On some of these there is an option to turn off over drive if you are hauling a heavy load/pulling trailer.

Oct 03, 2012 | 2001 GMC W3500

1 Answer

1992 chevy 3500 wont shift unless under hard acceleration


there is a transmission sensor on the top of your motor by the intake. it senses the accelerator or motor rpm's and tells the ****** to shift. its about 30.00 and easy to change. get it at any auto parts store.

Aug 26, 2012 | 1992 Chevrolet C/K 3500

1 Answer

Cold auto Transmission won't shift into 3 gear until after driving 1 mile or so (driving at about 35 mgh) pickup then downshifts from 3 to 2nd then back to 3rd a few times untill I get to work (7 miles...


Sounds like a bad speed sensor. Perform an ODBII scan soon. ECU should delay upshift until coolant temp senses warm up. It will not work right unless a signal is present from speed sensor.

May 22, 2017 | 1992 Mitsubishi Mighty Max

1 Answer

94 chevy truck with a 6.5 turbo diesel


where do i get a chip for a 94 gmc k1500 sle 6.5 turbo diesel

May 28, 2009 | 2000 GMC Sierra 3500

1 Answer

Trouble in shifting


I am having trouble understanding what you are saying but it sounds like you are saying the transmission shift points are too high. (Holds the gears too long, RPM's too high before it shifts) RIght? Check to see if you have vacuum to the modulator at Idle. If yes replace the modualtor.

May 27, 2009 | 1992 Ford Explorer

1 Answer

Trans wont shift into over drive on 1992 chevy 5.7 liter k1500


Do all the other gears work fine? Shift point at the right time? 1 to 2, 2 to 3, What speed does it shift 1 to 2 at light throttle? These are good for having stuck TV valves or broken TV cables. Does it **** when it shifts or when you put it in gear?

Apr 08, 2009 | 1992 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...