Question about 1996 Chrysler Concorde
I have a 96 chrysler concorde. I have owned about 1 month. After picking the car up I noticed a few problems, I took it back to dealership to get serviced. They found a leaking transmission line, but they forgot to fix it, Found this out about a week later when when check engine light came on, it took 2 before i could get to dealership to have it checked that is when they realized they didn't fix the line. Since then it will **** when shifting while slowing down to stop at a light, but it doesn't do it all the time. Also, it has acted like it is stuck in neutral when trying to pull away after being stopped. I have to rev the engine a little, then it will ****, hard alot harder than the **** while slowing down, before it will kick in and mve forward, after it is fine, it has done this twice, and only when the car seems to be cold.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i noticed my car doing the same thing after i bought mine you need to take it in and they need to put some shimes this will prevent it from shifting any hard and cause more damages have it inspected imeidiatley
Posted on Dec 29, 2008
SOURCE: Transmission down shifts hard
Check the trans fluid for quantity and color. If it is not a good red color, try having it changed and get the filter cleaned. If that looks okay, you may have a bad shift solenoid. Look for leaks around the trans case. Leaks on top around the solenoid are a sign that it is going bad.
Posted on Jan 31, 2009
Did your mechanic use a DRB III or equivalent scanner before performing the bleeding procedure after installing the master cylinder? This is a requirement by the manufacturer (Chrysler) when bleeding the brake system.
Posted on May 15, 2009
Call the service department and ask them if they know if there is a speed sensor available for the car and where it is located (internally or externally) this may be the problem or the secondary shift solenoid is bad. If you have not gotten any progrees from these strategies I would bring the car to an electrical diagnostic shop if they can trace the problem with the dash lights they may fix the transmission shift issue as well.
Posted on Jul 14, 2009
Tips for a great answer:
Dec 14, 2015 | 2005 Chrysler PT Cruiser
Apr 21, 2014 | 2004 Chrysler Concorde
Aug 02, 2011 | 1995 Chrysler Concorde
Feb 19, 2010 | 2003 Chrysler Voyager
Dec 24, 2009 | 1999 Chrysler Concorde
Nov 06, 2009 | 1996 Chrysler Town & Country
Sep 15, 2009 | 1996 Chrysler Concorde
May 05, 2009 | 2003 Chrysler Concorde
Nov 22, 2008 | 1997 Chrysler Concorde
Jul 01, 2008 | 2000 Chrysler Concorde
131 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: