Question about Jeep Grand Cherokee

1 Answer

2001 Jeep Grand Cherokee. Malfunction light came on. What is the cause?

I own a 2001 Jeep Grand Cherokee Larado and the malfunction light has come on. What can be the cause?

Posted by on

  • millwooddust Apr 30, 2009

    I have a 2001 Jeep cherokee sport 4.0 and check engine light came on so i took it to Auto Zone ran a diagnostic it read misfire on #3 so i replaced the spark plugs and the coil pack I unplugged battery to reset the computer it worked fine for about a week are two now the engine light is back on so i took it back to Auto Zone and it is saying the misfire #3 again. I was wondering if anyone knew how to fix.


  • Richard Scordino May 11, 2010

    name just about anything under the hood that has a wire connected to it!!! To make an even close diagnosis, you need to have a code check done!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

You can do one of three things.1. buy a scan tool 2. go to a dealer and pay to have the codes read and diagnosed 3. go to your local parts chain to have it read for free. (call first to verify). The code will tell you what system is malfunctioning and what the malfunction is. The parts store option is my choice, because you can also get the part to fix it if needed and you are not out the $ for diagnostics, nor did you need an appt to get it in.

Posted on Apr 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have grand cherokee 2001 limited the code p0700 is apper the gear is started scend shift espically in morinig


possible causes
Shorted or open circuit within Transmission Control Module (TCM)
- Faulty Transmission Control Module (TCM)
symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transmission shifting problems
p0700 description
The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.

Read more: http://engine-codes.com/p0700_jeep.html#ixzz2hihK6PVo

Oct 14, 2013 | 2001 Jeep Grand Cherokee

1 Answer

2001 Jeep Grand Cherokee- Larado owners manual


2001 Grand Cherokee its under WJ series that run from 1999 at 2004; check in this link to download: jeep-wj-owners-manual-pdf.

Hope this helps (remember to rate and comment this answer).

May 09, 2011 | 2001 Jeep Grand Cherokee

1 Answer

P0740 T Converter Clutch Circuit Malfunction


The transmission fluid could be in need of a change, certain parts in the transmission depend upon clean fluid to move properly, this could cause the pressure sensor to fail and engage the torque converter to lock up at the right time. Timing is counted with the computer and it will flash lights when there is a problem.

Feb 13, 2010 | 2001 Jeep Grand Cherokee

1 Answer

The driverside signals dont work and i think it is the flasher and anyone tell me where it is located on a 2001 jeep grand cherokee larado????


One of your left side parking lights is burned out. Good luck, Ned. The flasher works on resistance and the bulbs provide that redistance.

Oct 31, 2009 | 2001 Jeep Grand Cherokee

1 Answer

2001 jeep grand cherokee larado dies out


I would check the dealer for any TSBs

Oct 20, 2009 | 2001 Jeep Grand Cherokee

1 Answer

I have a 1999 jeep grand cherokee and the brake lights wont work


there's a possibility that it might be the socket that the bulb actually goes into. my break light did something similar to that. the socket only cost about 8 bucks from the dealer.

May 08, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Fault code P0720


code po720 is the output speed sensor malfunction

Jan 24, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Malfunctioning Indicator Light still on....


Check the injector for proper voltage. Check the cam sensor,,,,,DO NOT remove it unless you index it to the block. generally, a malfunction of the sensor will affect all cylinders, PS: you did check to make sure there is adequate spark at #1 plug, right?

Dec 11, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

734 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...